Car Service Station Equipment

Bearing Extractor Set 74-100mmIncludes 74 - 100mm Bearing Extractor (09582200) 57 - 75mm option also available as part number 09582100.A safe and simple pulling solution for larger bearings found on engines, gearboxes and industrial machinery.

Bearing Extractor Set 57-100mmIncludes 57 - 75mm & 74 - 100mm Bearing Extractors, also available separately as part numbers 09582100 & 09582200A safe and simple pulling solution for larger bearings found on engines, gearboxes and industrial machinery.

The split collet is pushed into the centre of the bearing and then expandedvia the hex nut on the end of the collet until a secure grip is achieved.The slide hammer is then attached providing the necessary extracting force.Internal Spread Min - Max: 6.5-8mmNo.00 - stamped on extractor

The split collet is pushed into the centre of the bearing and then expandedvia the hex nut on the end of the collet until a secure grip is achieved.The slide hammer is then attached providing the necessary extracting force.Internal Spread Min - Max: 8.5-10mmNo.0 - stamped on extractor

The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Notes Adapter required for the 10/12mm split collet extractor tool (sold separately)

The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Notes Adapter required for the 10/12mm split collet extractor tool (sold separately)

The split collet is pushed into the centre of the bearing and then expandedvia the hex nut on the end of the collet until a secure grip is achieved.The slide hammer is then attached providing the necessary extracting force.Internal Spread Min - Max: 19-22mmNo.3 - stamped on extractor

The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Notes Adapter required for the 10/12mm split collet extractor tool (sold separately)

The split collet is pushed into the centre of the bearing and then expandedvia the hex nut on the end of the collet until a secure grip is achieved.The slide hammer is then attached providing the necessary extracting force.Internal Spread Min - Max: 30-38mmNo.5 - stamped on extractor

Other sizes available on request.

Collets for Sykes Pickavant mechanical slide hammer puller extractor kits. 2 sizes available: 095816: 38 - 50mm. 095817: 50 - 60mm.

UNF fitting Compatible with existing 0958 Internal Split Collet Extractor range Extract components quickly and efficiently when conventional pullers cannot be used Removes gears, bearings, pinions, oil seals etc.

UNF fitting Compatible with existing 0958 Internal Split Collet Extractor range Extract components quickly and efficiently when conventional pullers cannot be used Removes gears, bearings, pinions, oil seals etc.

For use with 08542100 Slide Hammer when fitting smaller sized Split Collet Extractors ( 6.5 - 30mm / 09580900 - 09581400 )

Bearing Extractor 57-75mmCoverage for larger bearings found on engines, gearboxes and industrial machinery. Compatible with 09580600 / 09580700 / 09580800 kits and slide hammerswith M16 x 2mm fittings.74 - 100mm option also available as part number 09582200.

Bearing Extractor 74-100mmCoverage for larger bearings found on engines, gearboxes and industrial machinery. Compatible with 09580600 / 09580700 / 09580800 kits and slide hammerswith M16 x 2mm fittings.57 - 75mm option also available as part number 09582100.

These special pullers will remove blind housing bearings without the need to dismantle machinery or remove the running shaft. Positive seating allows even tension on inner and outer bearing rings, reducing resistance. Stabilisers reduce sideways movement and self-centre the puller. 3 kits cover a wide range of ISO bearings. (To identify kit for bearings without an ISO reference, refer to puller spread and adaptor diameter). Supplied in blow moulded case with foam.Min Spread: 20mmMax Spread: 95mmAdaptor Dia.: 5.5-8mmPuller Reach: 125mm

For the removal of blind housing bearings without the need to dismantle machinery or remove the running shaft. Positive seating allows even tension on the inner and outer bearing rings reducing resistance. The stabilisers reduce sideways movement and self centres the puller. The three sets cover a range of ISO bearings, if there is no ISO reference on the bearing refer to the puller spread and adaptor. 098000 - ISO designation: 6004-6010, 6004-6015. Reach: 125mm. Adaptor diameter: 5.5 - 8mm. 098100 - ISO designation: 6299-6205, 6200-6211 and 6212-6222. Reach: 415mm. Adaptor diameter: 5.5 - 12.5mm.

Specially heat treated alloy steel provides hardness with flexibility Length: 356mm Precision cut teeth Blade edges chamfered Maximum deflection of 14mm

Measurable 8 tonnes of pressure capacity. 85mm of travel allows for reduced setting operations and saves time. 4 x faster output operation than standard 1500 Series ram. Removable handle can be rotated 360. Integrated pressure relief control valve opens at 8 tonnes and cannot be overloaded. Oil hydraulics work in any position - even upside down. Features piston with spring return. Compatible with the 1500 Series Puller Range where the 8 Tonne Hydraulic Ram is used. Note: Images showing legs / beams and universal press frame not included - Shown for illustration purposes only

Contents2 x Seals1 x Grease1 x Installation Instructions

1500 Series - Nose Piece for 1500 Hydraulic Ram

Have a simple, grease filled ram instead of the mechanical force screw. This produces more power easily & efficiently. The spring loaded plunger provides direct, non- twisting application of thrust safely.

Twin Head (with centre nut)1 Dia. InternalSee Downloads section for Kit Contents List