Car Service Station Equipment

U.32T series lockable sliding 2 leg puller. Please see data sheet below for more information. Features and Benefits • Versatile: conversion possible in inside or outside grip with the same meg • Safety: knurled locking button

U.32T series lockable sliding 2 leg puller. Please see data sheet below for more information. Features and Benefits • Versatile: conversion possible in inside or outside grip with the same meg • Safety: knurled locking button

U.32T series lockable sliding 2 leg puller. Please see data sheet below for more information. Features and Benefits • Versatile: conversion possible in inside or outside grip with the same meg • Safety: knurled locking button

U.32T series lockable sliding 2 leg puller. Please see data sheet below for more information. Features and Benefits • Versatile: conversion possible in inside or outside grip with the same meg • Safety: knurled locking button

U.32T series lockable sliding 2 leg puller. Please see data sheet below for more information. Features and Benefits • Versatile: conversion possible in inside or outside grip with the same meg • Safety: knurled locking button

Features:- Shear pin prevents torque exceeding allowable limit- Supplied with 2 spare shear pins- Fitted with anti-rotation ring U.20-12Specifications:Spread: 25 - 260mmMax. Reach: 220mmMax. Holding Weight: 7 Tonnes

Facom Mac Pherson clamp separator tool kit in plastic storage case. Allows shock absorbers to be stripped down at the work bench. Features and Benefits • Helps open the clamp on vehicles fitted with Macpherson struts • Allows the damper to be easily stripped at the work bench • Fast and efficient • Suitable for all vehicles fitted with removable clamps (Citroen, Peugeot, Ford, VAG etc.) • Can be operated with 3/8" SD ratchets (not included) Contents • S.10A: 7.5 x 9 mm • DS.11A: 5.2 x 6.9 mm • DS.12A: 6.6 x 7.9 mm • DS.13: 4.3 x 6.0 mm • DS.14: 12.7 x 16.7 mm • DS.P: 3/8" (9.53 mm) square drive operating handle • J.236: Bit holder …

Robust and ergonomically designed fot intensive use. Specifications • Max Height: 100 mm • Dimensions: 101 x 44 cm Features and Benefits • Strong frame, max load 150 kg • Slatted wood shelf • Wheels attached by support plate and 2 screws • Interchangeable wheels • Exclusive flat tube manufacture: no dangerous sharp corners • High density foam padded cushion and head rest • Easy movement thanks to 6 roller wheels • V tubes for maximum shoulder clearance

Specially designed for the removal and fitting of specialist PSA exhaust clamps.

U.302 series self gripping outside puller with slim legs. Please see data sheet below for more information. Features and Benefits • Comfort: self gripping legs by return spring • Puller stays in rolling position even when not in tension

U.302 series self gripping outside puller with slim legs. Please see data sheet below for more information. Features and Benefits • Comfort: self gripping legs by return spring • Puller stays in rolling position even when not in tension

Facom U.14 Series Self Gripping Slim Leg Outside Pullers. Specifications • Spread: 10 - 35mm • Max. Reach: 40mm • Max. Holding Weight - 0.5 Tonnes Features and Benefits • Slim legs for improved access • Self-gripping legs by return spring • The puller stays in rolling position even when not in tension • Ideal for battery terminals and similar components

Facom U.89M230 universal spring compressor system with interchangeable forks. Specifications • Compressed Length: 305mm • Extended Length: 540mm • Diameter: 70mm • Travel: 235mm • Screw Size: 13mm • Weight: 14.7kg Features and Benefits • Two-stage screw operated telescopic body (hexagonal up to 22 mm) • Mobile spacer for two possible working positions for the forks • Drive via 1/2" impact wrench • Body tested to 100,000 N • Supplied with three sets of plastic-coated forks

Facom U.179A Air line Connector and Gauge. Specifications • Pressure Range: 0 - 12 bar • H [mm]: 80 • Width l [mm]: 120 • L [mm]: 250 • Legs: U.320-13A • Screw Size [mm]: 21 • Weight: 850g

Seperator and beam for inside grip set. Supplied in a steel case for transport and storage. Specifications • Spread: Ø 70mm to 160mm • Case Dimensions: 82mm x 224mm x 396mm • Weight: 9.5kg Contents • 1 Separator U.28. • 1 Beam U.30 • Steel Case BT.111 • Inner Tray PL.168

Light engineering puller kit in durable plastic storage case. Specifications • Case Dimensions: 389mm x 164mm x 66 mm • Weight: 2.1kg Contents • 1 leg puller U.301 for outside grip pulling (spread 10 to 80 mm) • 4 clamps U.49P1 to U.49P4 (spread 6.5 to 18 mm) • 1 beam U.53 KL0 • Plastic case BP.112 with PL.182B tray

Features:- Simple ‘pump handle’ operation makes pulling efficient and easy- 10 ton safety overload valve for added safety - 75mm travel - takes just 20 pumps to complete- 2 / 3 way beam allows 2 leg or 3 leg configuration - Intelligent plastic case - easy to transport - separates for easy roller cabinet storageIncludes:- Contains components to make 6 different hydraulic pullers.- 10 ton power pack - 2 / 3 way beam - 3 x extensions - 3 x Sets of 3 legs- In lockable storage / transport case

High capacity 20T outside puller. Features & Benefits • Versatile: takes 2 or 3 legs • Puller stays in rolling position even when not in tension • Safety: legs are locked in position on the bearing to eliminate the risk of them slipping off • Supplied with a screw extension Specifications • Size: 360mm Contents • U.320 Puller • U.320-14 Extension

Heavy engineering puller kit. For pulling bearings Ø 30mm to 60mm. Specifications Weight: 5.300kg Contents • 3 Pliers U.49P7 to U.49P9 • 1 Beam U.53KL2 • 1 Tip U.49BR1 • Plastic Carry Case BP.109 • Inner Tray PL.713

These 2 non tapped beams with mechanical specifications exceeding U.53K (dimensions, steel and thermal treatment) are designed to withstand the high loads generated by the power of jacks used. Please refer to the data sheet below for more information.

These 2 non tapped beams with mechanical specifications exceeding U.53K (dimensions, steel and thermal treatment) are designed to withstand the high loads generated by the power of jacks used. Please refer to the data sheet below for more information.

Facom U.53T separators are designed to fit behind races where ordinary puller claws will not reach. They can be used with beams assisted by screws or jacks. Please see data sheet below for specifications.

Facom U.53T separators are designed to fit behind races where ordinary puller claws will not reach. They can be used with beams assisted by screws or jacks. Please see data sheet below for specifications.

Facom U.53T separators are designed to fit behind races where ordinary puller claws will not reach. They can be used with beams assisted by screws or jacks. Please see data sheet below for specifications.