Car Service Station Equipment

ROCOL DRY MOLY Spray is a high purity,extreme load dry film molybdenum disulphide spray designed for use where a wet lubricant cannot be tolerated. This assembly lubricant is ideal for sliding surfaces, such as plain bearings, pins, cams and slides. It reduces friction and therefore increase life of moving parts in highly corrosive environments. DRY MOLY Spray can also be used in conjunction with a wet film lubricant enhancing performance and extending life of components and assemblies. Also available as a paste. Rolls Royce, RAF, Naval and NATO approved Specification Temperature Range: -50°C to + 450°CLoad Resistance: up to 7,000 kg/cm2Additional Information:• Lubricant Type: …

ROCOL DRY PTFE Spray is a non-toxic, non-staining dry PTFE lubricant, ideal for use in environments where wet lubricants cannot be tolerated, e.g. dusty environments such as paper mills and bakeries. Apply to pivots, links, pin and pulleys to prevent wear and extend component life. It is also ideal for use an as anti-stick agent on chutes and slides. The dry film is made up of a high level of sub-micron PTFE that provides light but very long lasting protection, giving extended re-lubrication intervals. Utilises DETEX technology, x-ray and metal detectable plastic aerosol caps and actuators reduces risk of plastic contamination. NSF H1 registered, ISO 21469, Halal and Kosher certified. WRAS approved …

ROCOL FLAWFINDER is a non-destructive inspection system that is designed to provide a fast, reliable method for visual detection of cracks or flaws, which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings, etc.ROCOL FLAWFINDER Cleaner Spray is a fast drying, no residue cleaner that cuts through dirt, grease and grime. Zero residue. Prepares the surface for non destructive testing.Additional Information:• Lubricant Type: Cleaner• Size (ml): 300

ROCOL FLAWFINDER is a non-destructive inspection system that is designed to provide a fast, reliable method for visual detection of cracks or flaws, which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings, etc. Comprsing 1 each of the following: 1 FLAWFINDER Cleaner Spray (300ml).1 FLAWFINDER Developer Spray (400ml).1 FLAWFINDER Dye Penetrant (300ml).Additional Information:• Lubricant Type: Kit

ROCOL FLAWFINDER is a non-destructive inspection system that is designed to provide a fast, reliable method for visual detection of cracks or flaws, which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings, etc.FLAWFINDER DEVELOPER Spray is an aerosol applied white powder. Designed to draw the penetrant out of a flaw, and enhance the definition, to facilitate detection when used in conjunction with FLAWFINDER DYE PENETRANT and FLAWFINDER CLEANER Sprays. Highly absorbent white film for rapid results. Suitable for pressure testing and leak detectionAdditional Information:• Lubricant Type: Developer• Size (ml): 400

ROCOL FLAWFINDER is a non-destructive inspection system that is designed to provide a fast, reliable method for visual detection of cracks or flaws, which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings, etc.ROCOL FLAWFINDER DYE PENETRANT is an aerosol applied red dye which is designed to penetrate into the finest cracks and flaws to facilitate detection when used in conjunction with FLAWFINDER DEVELOPER and FLAWFINDER CLEANER Sprays. Water washable.Additional Information:• Lubricant Type: Dye• Size (ml): 400

ROCOL STEAMSEAL PJC is an excellent pipe sealant primarily used in plumbing and industrial application for pipes, flanges and face joints. Its graphite and manganese compound provides efficient sealing for ferrous pipework. Hard-setting but flexible to resist vibration, thermal expansion and contraction of pipework. Joints sealed with STEAMSEAL are easy to break and clean. High pressure sealing capability, up to 193 bar (2800 psi). Specification Temperature Range: -20°C to 600°CAdditional Information:• Sundries Type: Sealant• Size (g): 400

ROCOL FOODLUBE® Chain Spray is a food grade aerosolised lubricant for chains, conveyors, pulleys and rollers in the food and other clean industries. Most wear on a chain occurs between the pins and rollers; where most chain lubricants just sit on the outer surfaces of the chain, FOODLUBE CHAIN Spray penetrates into these components to ensure protection from wear, thereby extending chain life. FOODLUBE® Chain Spray provides a highly adhesive lubricating film on the chain to avoid drips and fling-off. It also exhibits high thermal stability, preventing sludge formation and varnishing on the chain. Resistant to water wash off for maximum corrosion protection. Utilises DETEX technology, …

ROCOL FOODLUBE® Dismantling Spray is a non-toxic, fasting-acting penetrating lubricant for corroded threaded fasteners and other seized components. Short-term corrosion protection is provided by a light, residual film. With a wide operating temperature range from -20°C to +110°C. Its fast acting formula provides quick effective release of seized and corroded threaded fasteners. Only use in well ventilated areas and do not apply to very hot surfaces. Does not contain: mineral hydrocarbons, animal derived materials, nut oils or genetically modified ingredients. Store below +50°C, out of direct sunlight, has a shelf life is 5 years from date of manufacture. NSF H1 registered …

ROCOL FOODLUBE® Hi-Temp Grease 2 is a silicone grease fortified with PTFE, suitable for high temperature applications. Designed for the lubrication of all types of slower bearings and sliding surfaces. Ideal for rubbers and plastics. Offers good anti-wear properties and good chemical resistance. It is also highly resistant to water washout. Utilises DETEX technology, x-ray and metal detectable plastic caps and actuators reduces risk of plastic contamination. NSF H1 registered, ISO 21469, Halal and Kosher certified. Specification Temperature Range: -20°C to 200°CSize: 380gAdditional Information:• Lubricant Type: Grease• Size (g): 380

ROCOL FOODLUBE® MultiPaste Spray is a white, non-toxic lubricating spray that applies an anti-seize paste, ideal for use in food, pharmaceutical and other clean environments. Applications include the assembly and lubrication of: threads, bushes, slides, small open gears and fasteners. Prevents galling, pick-up and seizure. It is also suitable for use as a food-grade drilling, tapping and cutting lubricant particularly when maintenance has to be carried out in the process area. Ideal for use on stainless steel. Extremely tenacious, resists water wash out. Utilises DETEX technology, x-ray and metal detectable plastic aerosol caps and actuators reduces risk of plastic contamination. NSF H1 …

ROCOL GALVA BRIGHT Spray provides excellent long term corrosion protection for metal components requiring a permanent bright coating. Zero corrosion after 2,000 hours salt spray testing. It is a high performance coating or primer which contains pure zinc, aluminium, synthetic resins and additives. Excellent for repairing galvanised surfaces, with a non-toxic formulation. Suitable for use as a primer and can be over-painted. Temperature Range: -30ºC to 450ºC. Size: 500ml.Additional Information:• Lubricant Type: Cold Galvanising• Size (ml): 500

ROCOL GALVA FLASH provides long term corrosion protection for metal components that require a permanent bright, glossy appearance with the lustre look of aluminium. Zero corrosion after 1,000 hours salt and spray testing. It forms a high performance coating that contains pure zinc, aluminium, synthetic resins and additives. Its unique combination of flexibility and hardness is resistant to peeling, flaking and fading. Suitable for use as a primer and can be over-painted. Temperature range -30ºC to 450ºC. Size: 500ml.Additional Information:• Lubricant Type: Cold Galvanising• Size (ml): 500

ROCOL M23660 Gas Tap Lubricant lubricates and seals gas taps and taper plug cocks. Developed in conjunction with cooker and tap manufacturers for taper gas taps operating with 1st, 2nd and 3rd family gases. Suitable for high temperature applications up to 120°C. Excellent anti-wear and anti-seize properties. Meets the requirements of BS5494:1978, service No. 6 (30,000 operations).Additional Information:• Sundries Type: Lubricant• Size (g): 50

ROCOL HYLOMAR JOINTING Compound is a blue non-setting sealant for the effective sealing of metal to metal and most plastic to plastic components. It can withstand high temperatures and vibration often found in demanding jointing applications and is particularly effective for sealing flanges subjected to extreme vibration and distortion. Can resist pressures of up to 35 bar (500 psi). Joints sealed with ROCOL HYLOMAR JOINTING Compound are easy to break and clean. Specification Temperature Range: -50° C to +250°CAdditional Information:• Sundries Type: Sealant• Size (g): 100

ROCOL LAYOUT INK is a specialised paint designed for the marking out of metal surfaces in toolrooms, machine shops, etc. The thin, dry film enables clear, sharply defined lines to be scribed on most surfaces without flaking. Scribes without flaking or chipping. It offers excellent contrast and definition whilst also being easy to remove once the job is finished. Resistant to washing off by metal cutting fluids. Blue is ideal for bright surfaces, whilst white is suitable for dark surfaces.1 x ROCOL LAYOUT INK Fluid Blue 1 LitreAdditional Information:• Lubricant Type: Fluid• Size (ml): 1000

ROCOL LAYOUT INK is a specialised paint designed for the marking out of metal surfaces in toolrooms, machine shops, etc. The thin, dry film enables clear, sharply defined lines to be scribed on most surfaces without flaking. Scribes without flaking or chipping. It offers excellent contrast and definition whilst also being easy to remove once the job is finished. Resistant to washing off by metal cutting fluids. Blue is ideal for bright surfaces, whilst white is suitable for dark surfaces.1 x ROCOL LAYOUT INK Fluid White 1 LitreAdditional Information:• Lubricant Type: Fluid• Size (ml): 1000

ROCOL LAYOUT INK is a specialised paint designed for the marking out of metal surfaces in toolrooms, machine shops, etc. The thin, dry film enables clear, sharply defined lines to be scribed on most surfaces without flaking. Scribes without flaking or chipping. It offers excellent contrast and definition whilst also being easy to remove once the job is finished. Resistant to washing off by metal cutting fluids. Blue is ideal for bright surfaces, whilst white is suitable for dark surfaces.1 x ROCOL LAYOUT INK Spray Blue 400mlAdditional Information:• Lubricant Type: Spray• Size (ml): 400

ROCOL LAYOUT INK is a specialised paint designed for the marking out of metal surfaces in toolrooms, machine shops, etc. The thin, dry film enables clear, sharply defined lines to be scribed on most surfaces without flaking. Scribes without flaking or chipping. It offers excellent contrast and definition whilst also being easy to remove once the job is finished. Resistant to washing off by metal cutting fluids. Blue is ideal for bright surfaces, whilst white is suitable for dark surfaces.1 x ROCOL LAYOUT INK Spray White 400mlAdditional Information:• Lubricant Type: Spray• Size (ml): 400

ROCOL LEAK DETECTOR Spray is a specially formulated fluid designed specifically to identify even the smallest, positive pressure, gaseous leak on plastic and metallic pipe work and fittings. Suitable for use with most positive pressure gas systems carrying natural gas and LPG. Also safe for use with refrigerant gases. Fitted with a 360° valve for use in difficult to reach areas. Non corrosive formula.Additional Information:• Tool Type: Leak Detector• Size (ml): 300

ROCOL MOISTURE GUARD Spray forms a flexible, dry corrosion preventative film. It provides medium/long term indoor corrosion protection, up to five years, of bare metal components and mould tools particularly where condensation is a problem. The flexible film does not chip, crack or attract dirt/dust. Suitable for indoor protection of components such as bearings, gears, pressings and any machined metal product which requires protection from corrosive attack. Whether in storage, transit or between operations. It protects against damp atmospheres and condensation attack. After 1000 hours accelerated humidity cabinet testing, MOISTURE GUARD treated steel remains free from corrosion. Silicone free …

ROCOL MOULD RELEASE Spray is a high performance PTFE based release agent. Designed to give fast, efficient and clean release with faithful reproduction of the mould profile however complex the mould or minute the detail. Suitable for use on all plastic and rubber mould tools including injection, compression and blow mouldings. Enabling high speed production. MOULD RELEASE Spray offers excellent adhesion, is non-staining, will not transfer to product and can be safely used without fear of blemish or any adverse effect on subsequent finishing operations. Provides a dry matt finish, which is ideal for over painting or printing on, for a gloss finish please see PR Spray. Specification Temperature …

ROCOL MTLM Assembly & Running-In-Paste is a very high content molybdenum disulphide paste. Designed to give a tough, wear-resistant greasy film that provides anti-seize protection, eases assembly and provides complete protection during the critical start-up and running-in periods. Meets the specification of DEFSTAN 80-81/2. Specification Temperature Range: -50°C to + 450°CLoad Resistance: up to 7,000 kg/cm2Additional Information:• Lubricant Type: Paste• Size (g): 100

ROCOL MULTISOL cutting fluid is a general purpose mineral soluble oil, suitable for use on a wide range of machines and materials. The recommended dilution ratio is 1 part Rocol Multisol to 20 parts of water.Size: 20 Litres.Additional Information:• Lubricant Type: Fluid• Size (ml): 20000