Amplifiers

Rocksolid, roadworthy passive DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. It features a 600Ohm XLR output jack, switchable ground lift and switchable input attenuation – 0 dB,20 dB and40 dB. Frequency response: 10 Hz50 kHz. Instrument input: 50k Ohm. Parallel link jack: 50k Ohm. Dimensions: 76.2 x 127 x 50.8 mm.
Type: DI Box
Rackmountable: No
Number of Outputs: 1
UK/EU Power supply included: No
Number of Input Ports: 2
Made in: China…

Headphone Amp

Adastra 953.081UK

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
UK/EU Power supply included: No
Type: DI Box
Made in: Germany

Speaker switch box for connecting up to 2 pairs of speakers (4-8 Ω) in any combination to 1 stereo amplifier output.
Type: Desktop;Speaker Switch Box
UK/EU Power supply included: No
Width (cm): 17.6
Depth (cm): 10.0
Inputs: Spring-load speaker terminal
Headphone Output: No
Outputs: Spring-load speaker terminal
Made in: Taiwan
Controls: Switch
Net Weight (kg): 0.43
Height (cm): 5.0
Power Supply: Passive
USB: No

The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Type: DI Box
UK/EU Power supply included: No
Rackmountable: No…

Professional active direct box that allows connection of an instrument, line or speaker level signals to a mixer or other balanced input. It features highimpedance singleended 1/4” and XLR inputs that are buffered and converted by very lownoise active electronics into an isolated balanced lowimpedance signal source. It has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output – therefore it delivers a very clean, neutral sound with a wide variety of signal sources and over long signal runs even in high noise environments. Direct box features Input Attenuator switches that allow for a wide range of sign…

Sound processor, microphone splitter. Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The MAIN MIC OUTPUT passes phantom power from the main mixer to the MAIN MIC INPUT for use with condenser microphones. Phantom power is blocked from passing to the ISOLATED MIC OUTPUT. AS A COMBINER: The SPLITCom Pro provides one output from two microphone inputs. The PHASE switch can be used to invert the relative phase of …

Convert your digital audio signals (Toslink or coaxial) into a left/right stereo sound signal.Very practical if your audio amplifier has no or too few digital audio inputs.With improved 192 kHz sampling rate, for the best sound reproduction.Supports uncompressed, digital stereo signals.Supports 16 or 24 BIT, 8, 32, 44.1, 48, 96, 176.4 and 192 kHz sampling frequencies.With Wolfson DAC (digital-analog converter) for the best sound reproduction.Features:Audio input:1 x optical (Toslink), 1 x coaxial (RCA).Audio output:2 x R A (L/R).Sampling rate:192 kHz, 24 bit.Audio formats:2 CH PCM Stereo.Signal to noise ratio:>90 dB.Channel separation 90 dB.Frequency range:20 Hz ~ 20 kHz +/- 3 dB.Dimensions (…

Quite a bit of gear relies on Phantom Power to work these days, and the number is always growing. When you need a reliable power source, the M48 Phantom Power Supply is just the tool for the job. Perfect for all of your gear that requires Phantom Power like condenser mics. With a single XLR input and XLR output, get connected quickly. No guessing if it's working or how the battery life is doing. Dual LEDs let you know if it's on and if the battery is low. Some ''48v Phantom Power'' supplies don't quite give you the full voltage you need. The M48 always delivers 48 Volts of clean power. Use the included DC power supply or a 9V battery for maximum flexibility especially when working on location.…

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Colour: Black.
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No
Type: DI Box