Amplifiers

Pulze is a modern Bluetooth digital modeling amplifier with a minimalist exterior design, suitable for a variety of electric and acoustic instruments. Meticulously designed enclosure and speakers ensure high-quality audio playback performance and professional instrument tones within a portable form factor, faithfully reproducing classic sounds found on records. With a fully touchscreen operation combined with Bluetooth 5.0 module and a companion mobile app, Pulze offers a user-friendly, intelligent operating experience. It integrates recording, live streaming, and more features to inspire and capture your musical creativity at any time.Pulze strikes a perfect balance between tone and size. With …

DI Box / Desktop / Number of Channels 1

The Radial ProD2 is a compact stereo direct box developed specifically to address the needs and challenges of interfacing a stereo keyboard to a professional audio system. This passive DI features two independent channels with separate inputs and thru-puts for the artist's stage amp and two fully isolated outputs for the PA system. At the heart of the design are two high performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect …

The Radial ProAV1 and ProAV2 are passive direct boxes specifically developed with the audio-video integrator in mind. The ProAV1 features a variety of stereo inputs that are summed mono via a resistive mixer, greatly simplifying signal management. The ProAV2 delivers two discrete channels where full stereo functionality is required. To eliminate the need for various adaptors, both units are equipped with a 'Swiss Army' array of connectivity options including 1/4" inputs for instruments, RCA and 3.5mm (1/8") connectors for CD players, iPods, video decks and computers. The ProAV1 also features a female XLR input for interfacing equipment with +4dB professional signal levels. The front panel connectors …

PPX300 power amplifier19" rackmount 2U power amplifiers with fan cooling and output protection. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.Bridge mode for high power mono operationSwitchable clip limiterRemovable handles for low profile installPower rms @ 4 Ohms - 150W + 150WPower rms @ 8 Ohms - 100W + 100WPower rms bridge @ 8 Ohms - 300WDimensions - 88 x 483 x 266mm (2U)Weight - 8.2kg

Streaming Client

A mind-blowing portable powerhouse, Spark MINI delivers innovative, customizable smart guitar playing to go. With multi-dimensional high-quality sound, a treasure trove of amps and effects, all-new Smart Jam, video creation, and Bluetooth audio streaming, it’s the biggest smallest rig ever.Spark MINI comes stocked with 33 amps and 43 effects and pedals. Plug into authentic tones from boutique to modern. Download over 50,000 tones from ToneCloud community, or create your own, in the Spark app and assign them to any of the 4 presets on the amp.Spark's machine learning technology automatically builds inspiring bass and drum backing tracks based on your playing style. From simple and laid …

A mind-blowing portable powerhouse, Spark MINI delivers innovative, customizable smart guitar playing to go. With multi-dimensional high-quality sound, a treasure trove of amps and effects, all-new Smart Jam, video creation, and Bluetooth audio streaming, it’s the biggest smallest rig ever.Spark MINI comes stocked with 33 amps and 43 effects and pedals. Plug into authentic tones from boutique to modern. Download over 50,000 tones from ToneCloud community, or create your own, in the Spark app and assign them to any of the 4 presets on the amp.Spark's machine learning technology automatically builds inspiring bass and drum backing tracks based on your playing style. From simple and laid …

Jaw-dropping, room-filling sound with advanced acoustics powered by computational audio. Seamless integration with Spark App. Bluetooth speaker, audio interface, rechargeable battery and headphone/line out.Play whenever and wherever you feel like it with this app-supercharged tiny beast. We’re talking seamless integration with the Spark App chock full of amps, pedals, Auto Chords, Smart Jam, 50,000 tones on the cloud, and so much more.It’s easy to create your own tones, or download over 50,000 tones from the ToneCloud community. Get chords for millions of songs. Use AI-powered Smart Jam to learn and jam along with you, and much more. Spark GO comes stocked with 33 amps and 43 effects …

PLX3600 power amplifier, 2 x 1350W @ 4 Ohms19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.Bridge mode for high power mono operationOutput stable down to 2 OhmsRemovable handles for low profile installSwitchable clip limiterPower rms @ 2 Ohms - 2 x 1800WPower rms @ 4 Ohms - 2 x 1350WPower rms @ 8 Ohms - 2 x 800WPower rms bridge @ 4 Ohms - 2900WPower rms bridge @ 8 Ohms - 2300WWeight …

PLX2800 power amplifier, 2 x 1050W @ 4 Ohms

19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.
Bridge mode for high power mono operation
Output stable down to 2 Ohms
Removable handles for low profile install
Switchable clip limiter
Power rms @ 2 Ohms - 2 x 1400W
Power rms @ 4 Ohms - 2 x 1050W
Power rms @ 8 Ohms - 2 x 600W
Power rms bridge @ 4 Ohms - 2300W
Power rms bridge …

PLX2000 power amplifier, 2 x 700W @ 4 Ohms19" rackmount 2U power amplifiers with dual fan cooling and class H architecture for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. High power output stable down to 2 Ohms load per side can also be bridged mono to 4 Ohms. Switchable ground lift, bridge mode and clip limiter.Bridge mode for high power mono operationOutput stable down to 2 OhmsRemovable handles for low profile installSwitchable clip limiterPower rms @ 2 Ohms - 2 x 1000WPower rms @ 4 Ohms - 2 x 700WPower rms @ 8 Ohms - 2 x 400WPower rms bridge @ 4 Ohms - 1700WPower rms bridge @ 8 Ohms - 1250WWeight …

Joe Bonamassa Signature Model Guitar Speaker Simulator DI. The PDI 03 JB Speaker Simulator is a professional passive DI box for guitar amps. Providing a frequency compensated, transformer balanced direct feed to mixing consoles or soundcards it connects between the amplifier output and loudspeaker or equivalent dummy load. The PDI 03 JB has been developed for live, studio and home recording applications to eliminate the need for time consuming mic placement and mic-related problems. Designed to Joe Bonamassa's high standards for a huge but tightly focused tone the exclusive JB switch brings the output signal to the fore and takes it "right in your face." The PDI 03 JB's dual speaker simulation …

2-Channel Phantom Power Supply. Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just limited to condenser microphones. PAN 48 is excellent for supplying phantom powered active DI-boxes. The box has two channels. Specifications: 2 channels, each channel: Microphone input: XLR/f Pin 2 & 3 +48VDC, Pin 1 Ground Output: XLR/m no DC voltage Ground lift switch Phantom power stabilized ±5%. Low ripple, low noise Max. current 20 mA totally. LED control. Metal casing. Power Supply included. Dimensions: 120 x 115 x 45 mm, Weight: 0,68 kg.
Made in: Germany

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
UK/EU Power supply included: No
Made in: Germany
Тype: DI Box

Eagle PA6120T 100V Line Mixer Amplifier 120W RMS The Eagle PA Amplifier Is Ideal For Public Address With A Variety Of Inputs And Speaker Outputs. This Makes The PA6000 Series Is Perfect For Schools, Restaurants And Shops Among Other Places. The 5 Channel System Allows Microphones, Auxiliary Inputs And Even A Telephone Line. Channel 1 Microphone Has A Priority Setting That Allows The Channels 3-5 To Be Muted For The User To Make Announcements Such As In An Emergency. Master Controls Allow For Total Control Of Volume, Bass And Treble. Unit Is Supplied With Mounting Brackets For 19" Rack Installation. Features: Priority Microphone On Channel 1 Which Can Mute Channel 3-5 And AUX Input For Emergency …

PA240Z is a highperformance selectable HiZ (70V/100V) or LoZ (4/8) power amplifier featuring balanced and unbalanced inputs and additional linelevel output. This versatile amplifier features builtin DSP autostandby and maximum durability. PA240Z is suitable for a vast range of AV installations.

- Highperformance Amplifier With builtin DSP and additional balanced stereo linelevel output. PA240Z features flat frequency response unmatched sonic performance excellent signal to noise ratio and extraordinarily low distortion levels.
- Adaptable to Any AV Installation Switch between LoZ and HiZ to accommodate any type of loudspeaker installation. Select 1 Channel of 240W into a 70V/100V line …

Kramer Electronics PA-120Z audio amplifier Black

Kramer PA-120NET
Key Features
• 1 x 120W @ 70V/100V.
• 2 x 60W @ 4/8 Ω.
• Line–level output.
• 2ch Dante input & Stereo Line level input.
• Built–in DSP.
• Controllable via RS–232 and IP.
• Auto standby.

Product Overview
PA−120Net is a high−performance selectable Hi−Z (70V/100V) or Lo−Z (4Ω/8Ω) power amplifier featuring balanced and unbalanced inputs additional line−level output and Dante interface. This versatile amplifier features built−in DSP auto−standby and maximum durability. PA−120Net is suitable for a vast range of AV installations.

• High–Performance …

The Xvive P1 Portable Phantom Power Supply is a low-noise, 12V / 48V power supply. It runs on an internal rechargeable battery and has enough power to run high-current microphones. The P1 allows you to use microphones and devices that require external power in any setup. The small size, light weight, rugged construction, and exceptionally low noise of the P1 makes it perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit, that does not supply phantom power. Long battery life and a bright LED battery indicator ensure that the microphone is properly powered throughout your recording session.
Power Supply: USB and Battery
Battery Type: Li-Ion;Integrated<…