Submersible (Drainage) Pumps

Pump both dirty and clean water with the HSE130A, Great for circulating water in pools & fish ponds* it really comes into its own when pumping ground, rain and flood water, creating waterfalls & fountains in water features, garden irrigation or even emptying waste water from sump pits. Robust build quality with a cast iron base, it has a built in strainer allowing it to pump small solids in suspension. Convenient float switch operated - pump is automatically switched on, then off, as water level rises and falls. *Please note – If used in ponds containing fish and aquatic animals ensure additional protection around the inlet is used

The Flo-Force Ultra Macerator Pump is the perfect solution to your bathroom, cloakroom or utility plumbing needs. It is ideal when you need to install a new bathroom, cloakroom or utility in a part of your home that does not have access to the main plumbing system, for example loft and basement conversions. Highly corrosion resistant, marine grade 304 stainless steel motor casing. No external pipes, joints, valves or clips. This macerator is also IP55 rated. Discharge pipe length to the first elbow must be a minimum of 0.5 metres. This macerator also comes with 3 inlets. A 3 inlet macerator connects to a toilet and any 2 of the following products. washbasin, shower, urinal or bidet. This

The HSE200A is suitable for pumping both dirty and clean water. It is also ideal for pools, fish pond circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water drainage. The HSE 200A features a robust cast iron base. Includes filter base, outlet connector and 10m of heavy duty HO7RNF cable.

Clarkes top quality submersible pump handles both clean and dirty water. Robust build, and a heavy duty impellor means the CSV2A Vortex Pump will not only handle dirty, brackish water, it's also able to pass solids up to 30mm diameter. And, even better, it's fitted with an automatic float switch, a simple yet clever device that switches the pump on as the water level rises, and switches it off once the pump has done it's job and reduced the water level.

Industrial quality submersible pump, with stainless steel drive shaft, chrome plated body and 50mm (2") diameter outlet.

Clarkes powerful and rugged industrial quality submersible pump has a stainless steel drive shaft and chrome plated body, plus a 50mm (2") diameter outlet.

With a diameter of only 10 cm, the pump of deep and thin wells can be inserted into wells with a minimum diameter of 12.5 cm. The high quality brass thread of the pressure fitting is designed for 1/4" hoses. The case of the TDP 370 E is made of stainless steel. The pump is also equipped with a copper motor, a check valve and a built-in thermal protection circuit. Thanks to the 23 m long power cable, it is connected "plug & play". The dust strainer is also made of stainless steel. Prevents the penetration of particles larger than 1.8mm (based on 0.15% solids content in one ton of water) and protects the pump from sand and dust damage. To ensure that the TDP 370 E can be integrated to the bottom,…