Drill Bits

The Guhring No 205 HSS Jobber Twist Drill Bit is a professional-grade drilling solution manufactured from high speed steel for exceptional durability in demanding trade applications. Engineered for drilling a comprehensive range of materials including steel, cast steel (alloyed and unalloyed), grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. This drill bit delivers enhanced performance through improved chip flow and effective heat dissipation, extending tool life and maintaining cutting efficiency. Manufactured to BS 328 and DIN338RN standards, it provides the reliability and precision that professional tradespeople and contractors require for commercial metalworking …

The Guhring No 205 HSS Jobber Twist Drill Bit is a professional-grade drilling solution manufactured from high speed steel for exceptional durability in demanding trade applications. Engineered for drilling a comprehensive range of materials including steel, cast steel (alloyed and unalloyed), grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. This drill bit delivers enhanced performance through improved chip flow and effective heat dissipation, extending tool life and maintaining cutting efficiency. Manufactured to BS 328 and DIN338RN standards, it provides the reliability and precision that professional tradespeople and contractors require for commercial metalworking …

The Guhring No 205 HSS Jobber Twist Drill Bit is a professional-grade drilling solution manufactured from high speed steel for exceptional durability in demanding trade applications. Engineered for drilling a comprehensive range of materials including steel, cast steel (alloyed and unalloyed), grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. This drill bit delivers enhanced performance through improved chip flow and effective heat dissipation, extending tool life and maintaining cutting efficiency. Manufactured to BS 328 and DIN338RN standards, it provides the reliability and precision that professional tradespeople and contractors require for commercial metalworking …

The Stanley Brad Point Wood Drill Bit in 3mm diameter and 70mm length is the smallest in the range, making it the go-to choice for fine detail drilling, pilot holes, and precision joinery work in soft or hard woods, laminates, and chipboard. Despite its compact size, the precision centering tip ensures the bit stays exactly on target from the moment it touches the surface, producing a clean, accurate hole with minimal breakout. Manufactured from chrome-vanadium alloyed steel, it delivers reliable strength and durability in everyday use. The round shank is compatible with standard corded and cordless drills. Features and Benefits: • Centering tip for accurate starting and reduced bit wander …

The 7.5mm Draper Expert HSS Extra Long Jobber Drill Bit features an impressive 157mm overall length, making it one of the longest in the range. This substantial diameter is ideal for larger fixings, cable routing, and heavy-duty drilling applications across multiple materials. The 7.5mm size is particularly valuable in construction and engineering settings where you need to drill through thick timbers, metal frameworks, or create holes for substantial cable runs. The extended length allows access to areas that would be impossible to reach with standard drill bits. Manufactured from high-speed steel to DIN 340 ISO 494 standards, this drill bit combines strength with precision. The robust construction …

The Guhring No 205 HSS Jobber Twist Drill Bit is a professional-grade drilling solution manufactured from high speed steel for exceptional durability in demanding trade applications. Engineered for drilling a comprehensive range of materials including steel, cast steel (alloyed and unalloyed), grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. This drill bit delivers enhanced performance through improved chip flow and effective heat dissipation, extending tool life and maintaining cutting efficiency. Manufactured to BS 328 and DIN338RN standards, it provides the reliability and precision that professional tradespeople and contractors require for commercial metalworking …

The DeWalt Brad Point Wood Drill Bit in 6mm is a versatile mid-range size well suited to a wide variety of joinery and carpentry tasks on the job site. The 6mm diameter is a go-to choice for dowel holes, pilot holes, and general through-hole drilling in both hardwood and softwood. Precise cutting edges minimise splintering, ensuring clean hole entry and exit on finished or visible timber surfaces. The brad point tip seats positively on the workpiece, preventing the bit from skating across the surface before cutting commences. Engineered flutes clear chips efficiently, maintaining cutting speed and reducing the risk of overheating during sustained use. Constructed from high-quality chrome-vanadium …

The Guhring No 205 HSS Jobber Twist Drill Bit is a professional-grade drilling solution manufactured from high speed steel for exceptional durability in demanding trade applications. Engineered for drilling a comprehensive range of materials including steel, cast steel (alloyed and unalloyed), grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. This drill bit delivers enhanced performance through improved chip flow and effective heat dissipation, extending tool life and maintaining cutting efficiency. Manufactured to BS 328 and DIN338RN standards, it provides the reliability and precision that professional tradespeople and contractors require for commercial metalworking …

2 x Bosch HSS Twist PointTeQ Drill Bits 2.0mm

This Makita 2 Cutter SDS Plus Masonry Drill Bit is engineered for durability and precision, making it ideal for drilling into tough material such as concrete. Featuring a robust carbide tip and a reinforced flute design, ensuring exceptional performance and extended lifespan. Its SDS Plus shank provides a secure fit and efficient power transfer in compatible rotary hammers, allowing for fast and accurate drilling. Features & Benefits • Ideal for use in concrete • Durable tungsten carbide tip • 2-cutter • For SDS-PLUS hammers Specifications • Diameter: 5mm • Working Length: 100 • Overall Length: 160 • Quantity: 1

The Guhring No 205 HSS Jobber Twist Drill Bit is a professional-grade drilling solution manufactured from high speed steel for exceptional durability in demanding trade applications. Engineered for drilling a comprehensive range of materials including steel, cast steel (alloyed and unalloyed), grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. This drill bit delivers enhanced performance through improved chip flow and effective heat dissipation, extending tool life and maintaining cutting efficiency. Manufactured to BS 328 and DIN338RN standards, it provides the reliability and precision that professional tradespeople and contractors require for commercial metalworking …

The 28mm Sealey Worksafe Flat Wood Drill Bit is ideal for creating large diameter holes in wood and wood-like materials. This size is particularly useful for substantial plumbing work, creating openings for larger diameter pipes and fittings, and heavy-duty carpentry applications. The fully hardened construction ensures this bit maintains its cutting performance through demanding professional use, whilst the hex shank provides the secure engagement necessary to handle the increased torque of larger diameter drilling. The 152mm length delivers excellent control and accessibility. Features and Benefits: • 28mm diameter for large drilling applications • Fully hardened for long-lasting …

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below …

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

The Guhring No 205 HSS Jobber Twist Drill Bit is a professional-grade drilling solution manufactured from high speed steel for exceptional durability in demanding trade applications. Engineered for drilling a comprehensive range of materials including steel, cast steel (alloyed and unalloyed), grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. This drill bit delivers enhanced performance through improved chip flow and effective heat dissipation, extending tool life and maintaining cutting efficiency. Manufactured to BS 328 and DIN338RN standards, it provides the reliability and precision that professional tradespeople and contractors require for commercial metalworking …

The Stanley metal drill bits are high-quality, made from high-speed steel for general purpose drilling into metal. Engineered tip is ideal for drilling on contact, improved accuracy and drilling curved surfaces. The round shank is suitable for use with corded and cordless hammer drills. With its CNC-ground flutes, the Stanley HSS-CNC Metal Drill Bits ensure efficient chip evacuation, reducing heat buildup during drilling for enhanced performance and longevity. Features & Benefits • For use with corded and cordless hammer drills • For fast accurate drilling in soft steel, sheet steel and non-ferrous metals • Computer numerically controlled process for greater accuracy and quality …

The 6mm diameter, 210mm length SDS Plus drill bit provides extended reach for small to medium fixing applications. This combination is ideal for drilling through standard to thicker walls where the 6mm diameter is commonly specified. Fully hardened and precision ground, this bit delivers reliable performance for domestic and light commercial installations. Features and Benefits: • 6mm diameter for small to medium fixings • 210mm length for medium-depth drilling tasks • Fully hardened construction for durability • Precision ground for accurate hole dimensions Specifications: Brand: Sealey Size: Ø6 x 210mm

Stanley drill bits are designed to resist the impacts and fast drilling on concrete. The flute design removes the debris from the hole contribution for longer drill bit life. The hardened steel construction of the drill bit ensures exceptional strength, allowing it to withstand the toughest drilling applications. Whether you are working on soft or hard surfaces, its reinforced carbide tip provides maximum durability and longevity, ensuring consistent performance throughout projects. Features & Benefits • For drilling into house bricks and masonry • Shank diameter of drill bits 10-13mm is reduced to 9.5mm • Diameters larger than 13mm shank is reduced to 12.7mm • For use with …

The Draper Expert 7mm Brad Point Drill Bit is a versatile mid-range size, perfect for general woodworking tasks including furniture assembly, shelving installation, and cabinet making. This popular diameter is ideal for standard woodworking fixings and joinery applications where a balance between strength and precision is required. Crafted from hardened and correctly tempered carbon steel, this 7mm drill bit provides excellent durability and maintains its sharp cutting edge through extended use. The precision-ground brad point tip ensures accurate hole placement from the first contact, whilst the cutting spurs cleanly sever wood fibres before the main cutting edges remove the material, resulting …

The Stanley Hi Tech Masonry Drill Bit features a unique helix flute design that enables efficient debris removal, preventing clogging and ensuring smooth drilling. This design also enhances the bits overall drilling speed, making it a time saving option for projects. Whether you’re drilling though concrete, brick, or other types of masonry, this drill but will provide excellent precision and accuracy. Made from premium carbide material, this drill bit delivers exceptional durability and longevity, allowing you to tackle multiple drilling tasks without worrying about wear and tear. This not only saves you money in the long run but also ensures consistent performance over time. Features & Benefits &b…

The Sealey Worksafe HSS Twist Drill Bit Ø11mm is supplied as a single drill bit, ideal for creating clearance holes for M12 fixings and general heavy-duty drilling operations. The 11mm diameter is commonly used in structural metalwork, fabrication shops, and mechanical engineering where robust fixings are standard. This size provides adequate clearance for larger bolts whilst maintaining sufficient material strength around the hole, making it essential for assembling frameworks, mounting brackets, and heavy machinery components. Features and Benefits: • 11mm diameter perfect for M12 bolt clearance • Single pack suits specific project requirements • Heavy-duty HSS construction f…

The 7/32" Draper Expert HSS Drill Bit, with its 3-3/4" overall length, provides increased capacity for medium to heavy-duty drilling applications. This diameter is particularly suited to structural metalwork, larger bolt holes, and general fabrication tasks where substantial material removal is required whilst maintaining drilling precision. Manufactured from high-speed steel with a professional-grade twist configuration, this drill bit handles demanding materials including mild steel, stainless steel, cast iron, aluminium alloys, and hardwoods. The extended 3-3/4" length enables drilling through thicker stock and allows access to deeper or recessed work areas that shorter bits cannot reach.…

The Guhring No 205 HSS Jobber Twist Drill Bit is a professional-grade drilling solution manufactured from high speed steel for exceptional durability in demanding trade applications. Engineered for drilling a comprehensive range of materials including steel, cast steel (alloyed and unalloyed), grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. This drill bit delivers enhanced performance through improved chip flow and effective heat dissipation, extending tool life and maintaining cutting efficiency. Manufactured to BS 328 and DIN338RN standards, it provides the reliability and precision that professional tradespeople and contractors require for commercial metalworking …

The 7mm diameter, 210mm length SDS Plus drill bit provides extended reach for small to medium fixing applications. This combination is ideal for drilling through standard to thicker walls where the 7mm diameter is specified. Fully hardened and precision ground, this bit delivers reliable performance for domestic and light commercial installations. Features and Benefits: • 7mm diameter for small to medium fixings • 210mm length for medium-depth drilling tasks • Fully hardened construction for durability • Precision ground for accurate hole dimensions Specifications: Brand: Worksafe Size: Ø7 x 210mm