Hammers

Hamarr´´ is much more than a simple peg hammer. The Nordisk hammer is a proper tool, handcrafted with hard wood and hardened steel. It has a great balance and a feel that goes well beyond that of your average camping utensil. Your pegs won´t even know what hit them.But the Hamarr does not only help you get your camp set up on tough or frozen ground - it also helps you take it down again - with its special designed rear hook to pull the pegs back up.Features:- Hardened steel top- High end and replaceable brass head- Puller incorporated in back end- Hard wood shaft- Unique ax designed shaft- Leather strap- Reinforced shaft protection for missed strikes- Includes fabricated webbing belt holsterSpecifications:Measurements:- Len…

Handles for hammers 100, 101, 102 out of best-quality ash wood. Features and Benefits • Powerful hammering with surface protection • Spare handles for hammers 100, 101, 102 • Heavy-duty applications can be readily accomplished thanks to the best-quality ash wood handles. Contents 100 S Replacement ashwood handles for hammers 100, 101, 102, # 6 x 340 mm

Expert Quality, polished face solid forged head from fine grain high carbon steel correctly hardened and tempered with a lacquer coating for rust protection. Natural straight grained hickory shaft sanded and lacquered. Sold Loose.

Expert Quality, forged from fine grain carbon steel correctly hardened and tempered with a polished and lacquered head. Fibreglass shaft fitted with comfortable shock-absorbing rubber grip. Sold loose.

Expert Quality, fibreglass shaft with shock - absorbing rubber hand grip. The non - marking head is ideal for use when using on sensitive or easily marked surfaces. Sold loose.

Estwing E239 Roofer's Pick Hammer is designed for the roofing trade. It has a spike for making a hole in the slate, a claw for extracting old nails and a magnetised head for starting nails accurately. The hammer is made from solid steel with a genuine leather grip. Made in the USA.Milled faceLeather gripWeight: 620g (1lb 6oz).Additional Information:• Hammer Type: Roofers• Head Weight (g): 620• Head Weight (oz): 22• Shaft Material: Steel• Handle Type: Leather Grip

Rawhide head with solid wooden handle.

Thor 02-114 Hide Mallet Size 3 (44mm) 250g The Thor 02-114 Mallet has a head made from one piece of hide, in a process which has remained unchanged for over a century. Ideal for the jewellery trade, sheet metal work, die cutting industry and use on copper, brass and soft metals. Features:
- Manufactured from genuine Water-Buffalo hide tightly coiled, pressed three times under powerful hydraulic presses and seasoned for many months
- These carefully controlled processes ensure dependable hide mallets of uniform quality and maximum durability Specification:
- Size 3
- Head Diameter: 44mm 1.3/4in
- Head Length: 81mm 3.1/4in
- Wood: handle
- Weight: 250g…

Suited for high-impact use, these lightweight pear-shaped plastic head mallets are available in a range of sizes to suit your requirements. Complete with a solid, durable wooden handle. Features and Benefits Pear shaped head is manufactured from ultra-high molecular weight polythene for overall durability and delivery of solid blows Each mallet provides high impact whilst being extremely resilient and resistant to abrasion Polythene construction is resistant to corrosion and most chemicals and will not fracture splinter or delaminate Available to purchase in varying sizes to suit you required application Wooden handle is highly robust and can be replaced if damaged Typical Applications Jewellery …

Rawhide head with solid wooden handle.

34-RH200 Cast Iron head with Water Buffalo Hide faces. The split Cast Iron Heads have two socket head cap screws to secure both handle and faces. The design of the head allows for quick adjustment or replacement of both handle and faces. The Malleable iron head combined with the Hide face gives a firm resilient blow that will not mark the finished work. Ideal where a heavy blow is required combined with a relatively small striking area. Faces are designed to wear, can be rotated for even wear and are easily and quickly replaceable.

Rawhide head with solid wooden handle.

Tinmens - Cylindrical Ultra high molecular weight polythene mallet heads, suitable for high impact applications. With solid wooden shafts.

Rawhide head with solid wooden handle.

Thor 61-954 Black Rubber Mallet (74mm) 800g The Thor 61-953 is an all purpose mallet used widely for automotive, industrial, brewery, DIY camping etc. Features:
- Self locking handle
- Wood handle
- Provides a firm blow with very little rebound #Specification:
- Striking Material: Rubber
- Round Head Diameter: 74mm
- Approximate Weight: 800g
- Approximate Length: 340mm 13.1/2in

Rawhide head with solid wooden handle.

Thor 61-953 Black Rubber Mallet (64mm) 550g The Thor 61-953 is an all purpose mallet used widely for automotive, industrial, brewery, DIY camping etc. Features:
- Self locking handle
- Wood handle
- Provides a firm blow with very little rebound #Specification:
- Striking Material: Rubber
- Round Head Diameter: 64mm 2.1/2in
- Approximate Weight: 550g
- Approximate Length: 340mm 13.1/2in

Tinmens - Cylindrical Ultra high molecular weight polythene mallet heads, suitable for high impact applications. With solid wooden shafts.

Thor 61-952W White Rubber Mallet (54mm) 375g The Thor 61-952W is a Rubber Mallet fitted with a white head which wont leave marks on work surfaces. It's ideal for woodworking, builders, window frame manufacturers, shop fitting, car trim, DIY etc. Features:
- Self locking handle
- Wood handle
- Provides a firm blow with very little rebound Specification:
- Striking Material: Rubber
- Round Head Diameter: 54mm 2.1/4in
- Approximate Weight: 375g
- Approximate Length: 320mm 12.3/4in

Thor 02-116 Hide Mallet Size 4 (50mm) 340g The Thor 02-116 Mallet has a 50mm diameter head made from one piece of hide, in a process which has remained unchanged for over a century. Ideal for the jewellery trade, sheet metal work, die cutting industry and use on copper, brass and soft metals. Features:
- Manufactured from genuine Water-Buffalo hide tightly coiled, pressed three times under powerful hydraulic presses and seasoned for many months
- These carefully controlled processes ensure dependable hide mallets of uniform quality and maximum durability Specification:
- Size 4
- Head Diameter: 50mm 2in
- Head Length: 86mm 3.1/2in
- Handle: Wood
- Weight: 340g…

Thor 61-952 Black Rubber Mallet (54mm) 310g The Thor 61-952 is an all purpose mallet used widely for automotive, industrial, brewery, DIY camping etc. Features:
- Self locking handle
- Wood handle
- Provides a firm blow with very little rebound #Specification:
- Striking Material: Rubber
- Round Head Diameter: 54mm 2.1/4in
- Approximate Weight: 310g
- Approximate Length: 320mm 12.3/4in

Tinmens - Cylindrical Ultra high molecular weight polythene mallet heads, suitable for high impact applications. With solid wooden shafts.

A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles.

This 9 Piece Wiha Hammer Set is for all application fields, especially delicate surfaces. Contains eight interchangeable round hammer faces. These heads can be quickly and easily changed for the task at hand using the supplied hexagon L-key. GS tested. Supplied in a robust metal box. Contains the following: 1 x Safety Hammer with a high-grade hickory handle. 1 x Round Soft Face. 2 x Round Medium-soft Face. 2 x Round Medium-hard Faces. 1 x Round Hard Face. 1 x Round Very Hard Face. 1 x Hexagonal Ball End L-key 6.0mm.