Hammers

Quality: Premium; Weight [kg]: 1,939, 1.93; Number of tools: 10; Packaging: Plastic Case

Operating Pressure [bar]: 6,3; Nominal Size [mm]: 7,2; Air Connection Thread: 12.91 (1/4); Thread Type: Internal Thread; Air Consumption [l/min]: 170; Net Weight [g]: 2600; Noise Level [dB]: 97; Vibration Acceleration [m/s²]: 8,70; Net weight [kg]: 2,6; Length [mm]: 330; Tool handle type: Cold-insulating handle

Material: Tool Steel; Weight [g]: 2000; Length [mm]: 395; Tool handle material: Wood

Material: Tool Steel; Weight [g]: 1500; Length [mm]: 370; Tool handle material: Wood

Material: Tool Steel; Weight [g]: 1000; Length [mm]: 345; Tool handle material: Wood

Material: Tool Steel; Weight [g]: 500; Length [mm]: 320; Tool handle material: Wood

Material: Tool Steel; Weight [g]: 100; Length [mm]: 275; Tool handle material: Wood

Hammer head weight [g]: 2000; Tool handle type: 2-piece grip; Tool handle material: Plastic; Tool handle surface: Rubberized; Colour: Blue/black; Length [mm]: 395

Hammer head weight [g]: 1000; Tool handle type: 2-piece grip; Tool handle material: Plastic; Tool handle surface: Rubberized; Colour: Blue/black; Length [mm]: 345

Hammer head weight [g]: 500; Tool handle type: 2-piece grip; Tool handle material: Plastic; Tool handle surface: Rubberized; Colour: Blue/black; Length [mm]: 300

Hammer head weight [g]: 100; Tool handle type: 2-piece grip; Tool handle material: Plastic; Tool handle surface: Rubberized; Colour: Blue/black; Length [mm]: 275

Number of tools: 7; Tool handle surface: Plastic-coated

The nail puller is the perfect tool for removing nails from most materials, lifting floorboards, opening wooden crates and dismantling wooden structures. This specialist tool can even extract nail heads recessed below surface level and features a malleable cast iron slide handle with a hinged, drop-forged gripping jaw fixed to a box joint for extra strength. The tool is used by positioning the jaws on either side of the nail head before slamming down the slide handle to drive the jaws into the timber and under the nail head. The handle is then levered forwards using the base heel as a leverage point to keep the jaws tight whilst extracting the nail. Features: Malleable cast iron slide handle …

If you like to take care of every detail of your home and be up to date with products that will make your life easier, buy Mota mg07 rubber mass 700 g at the best price.Material: Rubber

If you like to take care of every detail of your home and be up to date with products that will make your life easier, buy Mota mg05 rubber mass 500 g at the best price.Material: Rubber

Handle Material : Wood Hammer Head Material : Chrome-vanadium Steel Features : Multifunctional Size:100g:26cm,140g 200g:28cm,250g 300g:30cm,380g Package included: 1* Hammer

Roughneck Gorilla Sledge Hammers are precision-forged from high-carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger-than-normal striking face with chamfered edge for general use. Both of these striking faces are induction heat-treated for hardness. The hammers also each feature a side striking face that is not hardened and is designed for striking wooden posts. A shock-absorbing TPE grip handle is designed for maximum comfort.This Gorilla Mini Sledge Hammer has the following specification: Weight: 1.8kg (4 lb).Length: 345mm.PTDROU65804

Roughneck Gorilla Sledge Hammers are precision-forged from high-carbon steel. Each sledge hammer features a dome-shaped striking point for exerting concentrated force. They also have a larger-than-normal striking face with chamfered edge for general use. Both of these striking faces are induction heat-treated for hardness. The hammers also each feature a side striking face that is not hardened and is designed for striking wooden posts. A shock-absorbing TPE grip handle is designed for maximum comfort.This Gorilla Mini Sledge Hammer has the following specification: Weight: 1.4kg (3 lb)Length: 345mmPTDROU65803

Mini composite hammer with 6 assorted heads and pry bar end. Round heads: Copper, Rubber, Aluminium & Steel. Flat heads: Copper & Plastic. Ideal for trim and body work. Pry Bar: 90mm long x 175mm wide. Heads: 25mm diameter.

DIY Supplies : Metalworking Handle Material : Wood Total length: 15.5cm Hammer head diameter: 2cm Weight: 0.13kg Package included: 1* Hammer

Product description: Material of the commodity: iron,plastic Size of the commodity:18.5*6.5cm Uses: Suitable for all kinds of small wall nails, used for hanging frame photo and wall painting, etc., suitable for photo wall installation, etc. Note: A slight color difference due to light, display, etc. is normal. Package Contents:1*mini claw hammer Caution: 1. Due to manual measurement, please allow 0.1-0.2 inch difference, thank you. 2. Please understand that due to the difference in light exposure or computer display, the color of the item may be slightly different from the picture. The merchant warrants that their products comply with all applicable laws, and are offered only if they

Medium Stroke Air Hammer Kit1/4" BSP InletSoft GripHandle ExhaustGeneration Series air hammer kit. Handle exhaust reduces noise emission, and contoured soft grip allows added comfort and control. Chisel variety covers a range of different applications. Supplied in storage caseFeatures: Generation Series air hammer kit. Handle exhaust reduces noise emission, and contoured soft grip allows added comfort and control. Kit includes spring retainers (x2), taper punch, special panel cutter, weld buster, panel cutter and cold chisel. Supplied in storage case. Specification: Air Consumption -4cfm Chisel Shank Size -.401" Parker Taper Free Speed -4500bpm Inlet Size -1/4"BSP Net Weight -2.2kg Noise Power/Pressure …

Medium Stroke Air Hammer and Chisel Kit1/4" BSP32mm StrokeStorage CaseMedium stroke air hammer and chisel set. Chisel variety covers a range of different applications. Supplied in storage caseFeatures: Includes a set of five chisels and a spare chisel retaining spring. Supplied in storage case. Chisel Shank SIZE: .401" Parker Taper. Air Inlet SIZE: 1/4"BSP. Air Supply: 90psi4cfm. WEIGHT: 1.2kg. Specification: Air Consumption -4cfm Chisel Shank Size -.401" Parker Taper Free Speed -4500bpm Inlet Size -1/4"BSP Net Weight -1.2kg Noise Power/Pressure -95/84dB(A) Operating Pressure -90psi Stroke -32mm Vibration/Uncertainty -13.4/1.5m/s dia Further Information We sell a wide variety of tools and workshop …

Locksmith´s Hammer, Manufactured According To Din 1041, With Forged Head In High Quality Special Steel With Polished Face And Peg, As Well As A Bevel That Complies With Regulations. The Face And Paw Are Carefully Tempered And Heat Treated. The Special Connection Between The Hammer Head And The Handle Forms A Non-Removable, Vibration-Damping Unit. These Properties, Combined With The Ergonomic American Hickory Wood Handle, Cause Remarkable Rebound Absorption, Resulting In Full Transmission Of Impact Force To The Workpiece, Ensuring Fatigue-Free Work, And Significantly Prolonging Life. Useful.Features:- No Vibrations.- Great Impact Force.- I Work Without Fatigue.- Long Useful Life.Specifications:- L…