Other Hand Tools Faithfull

These FAISTILTS Decorator's Stilts are widely used by tradesmen in the dry wall and suspended ceiling industries, stilts are both a time and labour-saving tool. They are designed to eliminate the use more→of ladders and steps in many building and decorating tasks.These Faithfull stilts are manufactured from lightweight aluminium; they can be fitted in seconds using the quick-release straps and the working height is adjustable in six two-inch increments from 18 to 30 inches (450 to 750mm). The stilts are supplied complete with a sturdy carry bag and full instructions. Specifications: Maximum load bearing: 114kg (250lbs).Height: 450-750mm (18-30in). Additional Information:• Type: Stilts

The Faithfull turning chisels for use on woodturning lathes. Manufactured from High-Speed Steel, these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much lo more→nger than their carbon steel equivalents, requiring less time being re-sharpened They are fitted with full-sized contoured walnut handles for user comfort and brass ferrules. Specifications Suitable for woodturning lathes Steel Walnut handles Overall length: 410 mm. Length of blade: 160 mm. Set of 8 woodturning tools supplied in a wooden box. What's Included 15mm Diamond Point Scraper 15mm Plain Skew Chisel 25mm Plain Skew Chisel 15mm Parting Tool 15mm Round Nose Scraper 8mm Roughing Out Chisel 1…

Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended more→by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 12mm (1/2 in).Additional Information:• Character Height: 12mm

The Faithfull fully insulated crow bar is made to BS8020 standards. With a pencil point at one end and a flat chisel edge at the other. The insulated shaft is manufactured using a solid fibreglass cor more→e which is coated with an abrasive resistant orange polymer coating. These insulated tools conform to BS80202002 for working on or near live cables. They are individually tested to 10,000 volts, and guaranteed to 1,000 volts.

The Faithfull Carpenters Pencils lay down a clear visible line irrespective of surface or grain. With the exception of some metals and polished or glazed surfaces, almost any material can be marked ou more→t with these carpenters pencils. The pencil has flat sides to prevent it from rolling away. There are three colour coded grades of hardness to cater for different surfaces. Supplied in a tube of twelve pencils with a specially shaped pencil sharpener. Grade Medium, Colour Red For general carpentry use.

The Faithfull PBM1522 is the ideal tool for the plumber, gas fitter or domestic heating engineer. It is capable of handling and bending 15 - 22mm O/D copper tube. Handheld, it can be used in restricte more→d spaces. Compact in design and easy to carry, the PMB1522 can also be held in a vice for occasional use as a bench bender. The leading arm has pre-set rollers for speed of operation. Size. 15 and 22mm O/D copper tube.

Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended more→by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 10mm (3/8 in).Additional Information:• Character Height: 10mm

The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when supporting ceiling boards and sheet materials during overhead fixing. With an adjustable working height. The more→feet at both ends swivel to accommodate sloping or uneven surfaces and improve grip. Supplied in a hardwearing storage bag to provide added protection. MUST NOT be confused with heavyweight equivalents which are designed to support heavy loads over extended periods. Specification Working Height: 1600-2900mmMax. Working Load: Vertical: 60kg, @45°: 20kgAdditional Information:• Type: Support• Size: 1.6-2.9m

The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. more→It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.Size 3000mm (10 ft)Section: 93 x 25mm (3 5/8 x 1 in)Additional Information:• Length: 3.0m (10ft)

Adjustable Heavy-Duty pipe cutter ideal for cutting steel tubing up to 50mm diameter. Uses spare wheel FAIPCW6002

Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently r more→ecommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Contents 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6). Set supplied in plastic box.

The Faithfull Curved Diamond Whetstone is a uniquely shaped stone specially designed for the sharpening of wood turning tools and carving chisels. Its curved diamond surface lets you sharpen both conc more→ave and convex surfaces. The small end has a radius of approx. 3mm (1/8in) and tapers up to the large end with a radius of 28mm (1.1/8in). The double sided steel stone is coated with mono crystalline diamond in 600G medium and 1200G fine grits. The 600G grit is for sharpening blunt edges and the 1200G grit is for final honing of the edge. Can be used dry or with water as a lubricant, no oils are necessary. Specification: Size: 250 x 56 x 17mmAdditional Information:• Type: Curved• Grit: …

The Faithfull Fencing Maul has been designed to drive wooden fencing posts in to the ground. The large flat striking faces help apply an even blow across the head of the post, facilitating accurate an more→d easy driving with minimal damage to the surface being struck. For added safety each mell head is securely fitted with a 70% solid core fibreglass shaft, which has a smooth polypropylene coating and a soft-grip, non-slip handle for added user comfort. These handles are lightweight and are unaffected by moisture and virtually unbreakable in normal use. Safety note: Fencing Mells should not be use for driving metal fencing posts. 1 x Faithfull Fibreglass Shaft Fencing Maul 6.35kg (14lb)Additional …

Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended more→by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 8mm (5/16 in).Additional Information:• Character Height: 8mm

This range of Faithfull Flexi Blades are designed for use in conjunction with the FAIPFLEXMAS Flexi Master Trowel, which is made from stainless steel and features a soft-grip handle for additional com more→fort. These 1mm thick plastic blades are fitted to a unique 10mm foam backing that offers great flexibility when applying pressure to either walls or ceilings during any stage of plastering. Simply select your blade and insert the Flexi Master Trowel and start plastering. Each blade is lightweight, easy to use and designed with squared and rounded corners on opposite edges of the blade giving you the flexibility to use the system in a variety of ways.Blade Size: 28inAdditional Information:• …

The Faithfull Plasterer's Bath is manufactured from heavy-duty polyethylene and is virtually unbreakable. Guaranteed not to rot, rust, crack or distort in adverse weather conditions. Strong, light and more→easily carried. Ideal as a rendering skip, water trough, or rubble container. Capacity: 165 litres.Additional Information:• Material: Polyethylene• Length: 1200mm

The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. more→It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.Size 2400mm (8 ft)Section: 93 x 25mm (3 5/8 x 1 in)Additional Information:• Length: 2.4m (8ft)

This range of Faithfull Flexi Blades are designed for use in conjunction with the FAIPFLEXMAS Flexi Master Trowel. They are the only metal interchangeable blades available that are supplied moulded to more→a unique 10mm foam backing. This drastically increases the blades flexibility when in use compared to a fixed handle flexible trowel. Simply select your blade and insert the Flexi Master Trowel into the Flexifit system and start plastering. Each blade is lightweight, easy to use and designed with squared and rounded corners on opposite edges of the blade, giving you the option to use the system in a variety of ways. These steel blades are supplied with a full blade guard which should be removed …

The Faithfull Diamond Whetstone Kit contains 3 stones for quick, easy and effortless sharpening of any blade. The 70 x 200mm metal stones are electroplated with monocrystalline diamond in three grits, more→400G Coarse, 600G Medium and 1000G Fine. The ABS plastic base has non-slip pads for use on most surfaces, and each stone can be removed to be used separately. The benefit of these stones over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not ‘groove’ over time. This is essential in order to provide consistent straight edges on precision cutting tools such as wood chisels and plane irons. Diamond stones will sharpen carbon steel,…

Faithfull Long Series Combination Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate startin more→g with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be use in timber, plywood, MDF and blockwood and can be resharpened using a hand file. Extra long series for deep boring. Overall Length 400mm.