Other Hand Tools Stanley

This Stanley single pinion hand drill had a 3-jaw chuck for greater versatility. It has an aluminium gear wheel which is long lasting, strong, and lightweight. It has a mandrel with three 8mm diameter bits. Made of precision die cast for strength and durability.Specification: Length: 265mm.Additional Information:• Type: Hand Drill• Chuck Capacity: 8mm

Stanley 0-16-880 Dynagrip Bevel Edge Chisel 25mm The Stanley 0-16-880 25mm chisel is part of the Dynagrip range which is available in numerous sizes. It features a lacquered blade for corrosion resistance and an ergonomic soft-grip CAB handle for comfort and control. It is designed for intensive use, with a steel striking cap for increased striking efficiency. Features:
- Blade Lacquered for corrosion protection
- Ergonomic soft grip CAB handle for comfort and control
- Forged high Chrome-Carbon steel Blades for edge retention
- Longer handle design for shock/shatter resistance in use
- Manufactured in Sheffield, England
- Pre-sharpened blade – ready for immediate use
- Specifically ma…

Mark lines with ease using The Stanley 0-47-100 Metal Chalk Line The Stanley 0-47-100 chalk line is perfect for marking long, straight lines. It has a 30g chalk capacity and features a metal outer case for maximum strength and durability on the job site. Features:
- 30g chalk capacity
- Can be used vertically as a plumb bob
- Die-cast aluminium case for durability
- Metal case for strength and long life
- Stainless steel end hook for added durability and rust prevention
- The line is blocked by folding the handle
- The powder is put in by screwing the watertight upper milled stopper
- Equipped with felt to regulate the flow of powder
- Universal hanging clip Specification: …

Stanley 0-47-465 PowerWinder Chalk Box 3 Piece Set - Blue Chalk The Stanley 0-47-465 chalk line is ideal for marking long, straight lines on relatively flat surfaces. The case has a 45g chalk capacity to reduce refilling and is extremely durable for job site use. Quick gear release means that the crank will not spin when pulling out the line and its large, aggressive, stainless steel end hook does not rust for long life. Features:
- Steel crank handle
- On-Board Hook Storage
- Contains 100ft of 40lb string
- Sliding door for quick and easy refill
- Stainless steel end hook does not rust
- Metal crank folds inside the case for storage
- The case holds 45g/ 1.5oz chalk to reduce …

The Stanley FatMax® 30 metre Chalk Line is enclosed in a durable die-cast aluminium housing with a patented chalk view window to see exactly how much chalk is left. It contains 100ft of 50lb polyester/nylon string and will hold over 1.5oz of chalk.A release button allows a line extension without handle rotation, the line can be quickly rewound due to the 5:1 gear ratio. The specially designed hook grabs on side, top or bottom for versatility. Specification: Length: 30m (100 ft). Additional Information:• Line Length: 30m

Stanley 0-47-488 FatMax Extreme Reel & Chalk The Stanley 0-47-488 consists of a 30 meter chalk line with 225-gram pack of black chalk. The black chalk is ideal for external masonry and general internal use. It has an aluminium body to help protect it from any impacts on the job site and is waterproof and non-clumping, meaning it can still be used if soaked with water. Features:
- FatMax 30 metre chalk line and chalk set. Chalk line in a durable die-cast aluminium housing with a patented chalk view window to see exactly how much chalk is left
- A release button allows line extension without handle rotation and the line can be quickly rewound due to the 5:1 gear ratio
- On-Board Hook sto…

The Stanley Precision Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws allow for precision nail pulling and prying and the contoured bar makes pulling, prying and lifting easier. They are ideal for heavy-duty demolition work.1 x Stanley Precision Pry Bar Claw 250mm (10in)Additional Information:• Type: Claw Bar• Length: 250mm

This 0-55-116 moulding pry bar is made from heat treated, forged, high carbon steel The contoured bar makes pulling nails, prying and lifting easier and the flat surface allows users to cleanly pry moulding and trim, thus reducing material damage. The polished, bevelled claws allow precision nail pulling and prying. Features:
- Manufactured from forged and tempered high-carbon steel for safety and long life
- Polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim, thus reducing material damage
- Contoured bar makes pulling, prying and lifting easier
- Ideal for heavy-duty demolition work Specification:
- Length: 200mm (8 in)…

This moulding pry bar is made from heat treated, forged, high carbon steel The contoured bar makes pulling nails, prying and lifting easier and the flat surface allows users to cleanly pry moulding and trim, thus reducing material damage. The polished, bevelled claws allow precision nail pulling and prying. Features:
- Flat surface allows users to cleanly pry molding and trim, reducing material damage
- Forged high-carbon alloy steel for long life
- Tempered for safety
- Heat treated for durability
- Polished bevelled claws allow precision nail pulling and prying Specification:
- Length: 250mm (10 in)

Stanley 0-58-930 Dynagrip Nail Punch Set, with a long working life With Bi-material for a comfortable cushioned grip, the Stanley 0-58-930 tempered steel Dynagrip nail sets will give a good, long working life when driving finish nails beneath trim work. They have been colour coded for easy size identification and the long length allows for use in hard to reach areas. Features:
- Cupped tip for easy alignment
- Elastomer handle for a good hand grip
- Colour coded by tip size for easy identification
- Used for driving finish nails beneath trim work
- Long length allows for setting nails in hard to reach places
- Induction heat treated for safety and improved performance
- Over-moulded …

This Stanley 5044 Bit Brace, 250mm/10in, has a 12-point, 3-way, ratchet for use in confined spaces. The head is ball bearing mounted for smooth operation and has a 13mm universal chuck with 4 jaws and with a holder for square tip bits.This brace is chromium plated for corrosion resistance and longer life, it has a reversible 8 tooth ratchet. Specification: Length 250mm. Additional Information:• Type: Brace• Chuck Capacity: 13mm

The easy to use solution for precise mitre cuts, this mitre saw block allows you to store your saws as well as create perfect cuts. The box possesses 90 and 45 mitre slots as well as 22.5 for octagonal shapes. Manufactured from lightweight high impact ABS plastic. Features and Benefits 90, 45 and 22.5 angles and 45 scarf cut guide for versatility of use Front lips is designed to stay on the workbench to prevent slippage in use Holes are pre-drilled in the base for easy fastening to your work bench Manufactured from lightweight, high impact ABS plastic maximum for strength and durability Typical Applications Workshops Carpentry DIY

Stanley 1-55-157 Demolition Ripping Bar 28 Inch The Stanley 1-55-157 demolition ripping bar is made from forged high carbon alloy steel, heat-treated for durability and long life. This robust ripping bar is used for heavy-duty demolition. It has a claw end with a bevelled nail slot. Features: Heat-treated for long life Claw end and bevelled nail slot Used for heavy-duty demolition Made from foged high carbon alloy steel Specification: 28 Inch

The Stanley FatMax® Spring Steel Wrecking Bar is an ideal tool for all builders, carpenters and plumbers and is widely used in factories, warehouses and the farming industry. Manufactured from round spring steel, which is hardened and tempered to ensure maximum strength and durability, and with double ended claw ends. Ideal for opening packing cases, pulling out nails, levering off, shuttering etc.1 x Stanley FatMax® Spring Steel Wrecking Bar 600mm (24in)Additional Information:• Type: Wrecking Bar• Length: 600mm

Spring steel for strength and durability. Precision ground edge for better penetration. Wider prying edge for better leverage. Flat striking face for demolition work and impact with hammer. Low weight for ease of use.

Stanley 1-55-515 Wonder Bar 34cm Get the prying power you need with the 1-55-515 Wonder Bar Pry Bar. This strong hand tool is designed to give you excellent leverage for pulling nails, lifting, and scraping. It's heat-treated, forged high carbon steel ensures maximum durability and long life. Features:
- Made from heat-treated, forged, high carbon steel for strength and durability
- The end has a high visibility powder coated finish and polished tips
- Bevelled nail slots make it more efficient for pulling nails, lifting or prying
- The contoured bar makes it easier to use Specification:
- Size: 340 x 45mm (13 x 1 3/4 in)
- Net Weight: 0.596kg

Multipurpose bar 53cm.Features:- 53cm tempered carbon steel bar for greater durability.- Yellow lacquer finish for better visibility. Ideal for nail pulling, small prying actions, furniture shoeing, etc.

This Stanley 029088, a 3 assorted Abrasive Brush Mixed Set comes with nylon, brass, and wire filling. They are suitable for a multitude of cleaning jobs.Additional Information:• Wire: Mixed Set

Forged from quality chrome vanadium steel for increased strength and durability. The blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.Bi-Material hand guard for increased comfort and protection from over strike.Size: 100mm (4in).Additional Information:• Width: 100mm

Used by electricians for cutting out patrices, this chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 250 x 57mm (10 x 2 1/4 in).Additional Information:• Length: 250mm (10in)• Width: 57mm (2.1/4in)

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size: 300 x 25mm (12 x 1in).Additional Information:• Length: 300mm (12in)• Width: 25mm (1in)

The Stanley 5-21-293 is a replacement surform blade Replacement Surform blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum. Features:
- 10 inch
- For use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum