Insulation pullers

Combines an EOBD code reader and oil service tool in one unit. Extensive vehicle coverage for resetting the oil service/inspection lights. Suitable for setting inspection 1 or 2 service intervals and inspection mileage. Also includes manual reset using clear step-by-step on-screen instructions. Suitable for any EOBD compliant vehicle and reads EOBD diagnostic codes (Engine/Transmission) and enables the cause of the illuminated engine check light (MIL) to be established. Includes all the usual features expected in a quality EOBD code reader. The tool is updateable via web-based downloads. Supplied with operating instructions, CD and USB cable in storage pouch. Visit www.auteltech.com and register,…

The Bahco 36 Nail puller is a compact tool for fast, easy removal of nails in crates etc. The nail puller is made from high-performance alloy steel with a comfortable and non-slip thermoplastic grip handle. It has a black finish and is anti-corrosion treated. The patented internal spring keeps the jaws open and the wide striking area is able to be used as with a claw hammer.

Bahco replaceable, double-edged blades to fit Bahco 625, 650 and 665 scrapers. These carbide-edged blades last up to 50x longer than conventional steel blades. They smooth and remove paint, glue, varnish and rust without the need for heat. The blades have convex ground edges to reduce the risk of scratching surfaces and cut on both the pull and push strokes. Blade Length 65m The mini blade cuts on flat and point for intricate mouldings and detail work. Blade Width 50 mm /2in. To fit 440 / 650 only.

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc. Gauge 0.8 mm /21g.

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile. Each scraper comes complete with a plastic edge protector. Ideal for smoothing hardwoods, removing paint and varnish etc. Gauge 0.8 mm /21g.

The Bahco 5-in-1 Switch Cabinet Master Key is suitable for all the usual technical shut-off systems. It has a varnished plastic body with a practical retaining clip and the key profiles are zinc die-cast for increased durability. The Master Key has 4 different keys, which are fitted on a double turning mechanism, allowing good positioning. In addition, the body houses a magnetic 5mm square and 1/4in bit holder, and a magnetic pocket for 1/4in bits in 7-8mm square profile. It has the following functions 3 x Square 5, 6 & 7-8mm. 1 x Triangular 9mm. 1 x Two-way 3-5mm.

Bahco Paint scraper developed according to the scientific ERGO process. This scraper is specially designed for precision work such as scraping windows, moulding and narrow corners. The two-component handle provides ample space to scrape with both hands, better grip and excellent working comfort it as a narrow front for a precision thumbgrip. It is supplied with Bahco 449 25mm triangular blade and is also suitable to be used with 625-round, 625-drop and 625-pear blades. Also supplied with a holster with integrated clip for convenient storage in a pocket or on a belt. Blade Length 25mm Weight 150g

Bahco 650 Carbide Edged Power Scraper developed according to the scientific ERGO process with a comfotable, two-component handle which provides ample space to scrape with both hands. The scaper is ideal for universal use, regardless of scraping direction. The blade is made of Carbide for easy removal of paint, glue, varnish and rust off various surfaces. Supplied with a 442, 50mm double edged straight blade. Designed to fit both 50 and 62mm blades. Blade length 50mm. Weight 170g.

Bahco 665 Carbide Edged Heavy-Duty Paint Scraper for power scraping of large areas. Developed according to the scientific ERGO process, it features a comfortable two-component handle that provides ample space to scrape with both hands. The Slim scraper head offers better access in confined spaces. It is designed for heavy-duty use and the carbide blades allow easy removal of paint, glue, varnish and rust off various surfaces. Supplied with a 441, 65 mm double edged straight blade. Will accept 50 and 62mm blades. Blade length 65mm Weight 210g

Bahco spare part kits for the adjustable wrench 80 and 90 Series, this set contains roll, pin and a spring. They are left-hand screw. Finish Phosphated. Contents knurl, pin & spring Left-handed screw Suitable for the following wrenches 8072, 8072 C, 9072, 9072 C, 9072 P, 9072 PC

This range of Bahco spare jaws are suitable for the series 80 and 90 adjustable wrenches. Possessing a left-hand screw and a phosphated finish, products 8075-1 and 8074-1 are the Spare Jaw Only, whilst 8075-2 is a spares kit containing a roll, pin and a spring. Features and Benefits Phosphated finish further protects the product from corrosion as well as wear and tear Easy way of keeping your series 80 and 90 adjustable wrench working to an optimum level Available in two sizes to suit your needs, as well as as a spares kit (product 8075-2 which contains a roll, pin and spring) Typical Applications Automotive Construction Plumbing DIY

Bahco Expansive Bits are capable of drilling a wide range of shallow hole sizes in wood. The MD series have round shanks and are suitable for use with power tools. Made from a single-piece of drop forged steel. Head and adjustable cutters hardened and tempered. Locking screw zinc plated with hexagonal head with slot. With expansive bits it is possible to drill a full range of diameters with the same bit, in wood. Adjustable with screwdriver or wrench. Size 15-45mm. Length 120mm. Shank round.

9528-MD-22-76 Expansive Bit 22-76mm

The Bahco 9626 Series Combination Auger Bits are made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for a firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. Ideal for quick precision cutting with all types of wood. This Bahco 9626 Series Combination Auger Bit has the following specification Size 13mm Working Length 155mm Overall Length 230mm

The Bahco 9626 Series Combination Auger Bits are made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for a firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. Ideal for quick precision cutting with all types of wood. This Bahco 9626-6 Combination Auger Bit has the following specification Size 18mm Working Length 155mm Overall Length 230mm

The Bahco 9626 Series Combination Auger Bits are made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for a firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. Ideal for quick precision cutting with all types of wood. This Bahco 9626 Series Combination Auger Bit has the following specification Size 22mm Working Length 155mm Overall Length 230mm

The Bahco 9626 Series Combination Auger Bits are made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for a firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. Ideal for quick precision cutting with all types of wood. This Bahco 9626 Series Combination Auger Bit has the following specification Size 24mm Working Length 155mm Overall Length 230mm