Other Hand Tools

This wheel bearing kit is an essential service tool for selected Ford, Mazda and Volvo models fitted with 78mm 2nd generation wheel bearings. These second generation bearings can't be separated from the drive flange so this specialist fitting/removing tool must be used when working with the bearings. Using clamp collars and force pegs, the tool ensures the loads of insertion are taken only on the outer race of the bearing, which reduces the risk of damage and makes the job easier.

The Laser 6762 injector sleeve remover and installer features a specially designed kit, which features a collet design to grip the sleeve from above, and attaches to the puller force screw.

The GA44 steering turntables are supplied as a pair and allow the user to record an accurate measurement of toe-in/out and full lock. With measurements taken whilst the vehicle is stationary, these turntables are equipped with a low profile two-way sliding action to accommodate the complex turning movement of the vehicle’s steering geometry. Locking pins are also provided to lock the sliding action whilst the vehicle is positioned onto the turntables. This product can be used in conjunction with the GA42 Gauge Set for accurate castor and kingpin alignment. The GA44 will measure up to 45 degrees rotation in either direction and the maximum loading of a pair is 1360kg.

The Altrad Belle 1.9m beam is designed to be used with the 157.9.010 petrol drive unit to smooth out and remove air bubbles from cement. Image shows full tool, this product only comes with the beam.

Blister of 5 Flat Bits 1/8" x 0, 020 50mm Masterbit

Puller

This wheel bearing kit is an essential service tool for VAG (Volkswagen Audi Group) models fitted with 62 & 66mm 2nd generation wheel bearings. These second generation bearings can't be separated from the drive flange so this specialist fitting/removing tool must be used when working with the bearings. Using clamp collars and force pegs, the tool ensures the loads of insertion are taken only on the outer race of the bearing, which reduces the risk of damage and makes the job easier.

A comprehensive kit ideal for the professional automotive bodyshop, the master hammer dolly set from Power-Tec comes complete with a wide range of hammers, dollies and spoons manufactured for use on various panels around a vehicle and for various bodywork repair applications. A great value complete package, this set even comes with a useful heavy duty steel case for storage and organisation.

Double-sided mobile bin trolley, comes with 60 or 90 mixed bins

Set of seaming pliers, 4 part, in a plastic case. Supplied = assembled. Number of parts = 4 pcs. Product type = set of pliers. Chrome-vanadium. Powder coated. In a practical plastic case. High quality professional seaming pliers made of chrome-vanadium steel, forged and powder coated. In a practical plastic case with hard foam insert. Contents: 1 x straight seaming pliers, length 280 mm. Width 44 mm. 1 x seaming pliers with 45° angle, length 280 mm. Width 44 mm. 1 x seaming pliers with 90° angle, length 280 mm. Width 44 mm. 1 x mini seaming pliers with 45° angle, length 180 mm. Width 22 mm.

Hole punch set, 16 parts, chrome-vanadium. Supplied = assembled. Number of parts = 16 pcs. Product type = punching iron mandrels. For punching out rings and perforating discs. Punches can be used in pairs. Chrome-vanadium. In a sturdy plastic case. Can be used for: foam, cardboard, leather, rubber, fibrous materials, plastics and lead.

These tools facilitate the breaking and riveting of roller chains pursuant to DIN 8017/8018 and are useful for workshop use. To break chains with parallel bearing pins it is necessary to use Riveting Plate together with Pin Punch. These tool kits can also be used to assemble chains. The Fetching-Up Punch and the Bearing Pin Riveting Punch are used to complete this operation. Riveting Plate

Hollow Punch Set From 2 To 50MM With Bi-Material Handle To Manufacture Gaskets, Seailing Rings In Different Materials Like Rubber, Plastic, Aluminium Sheets Note: Image is for illustrative purposes only and may differ from the actual product

MECH PULLER - 3 LEG 150 X 165MM

Puller 2-arm pattern 420x480 mm

This is a comprehensive, high quality cooling system pressure testing kit complete with a range of adaptor caps allowing for use on a wide range of vehicles. Supplied with a thermometer to aid diagnostics and ensure the system is cool before removing the cap. Simple to use, this kit locates system leaks from the header, expansion tanks and fittings, the head gasket, radiator core, heater matrix, water pump, hoses, pipes and much more, ensuring you have every inch of the vehicle's cooling system covered.

The Laser 6163 is designed to install or remove the bush on the vehicle without the need to disconnect the brake lines or removal of the bush positioning bolts or mounting plates. This unit will work with Ford Mondeo Mk IV 2007-2013, Galaxy 2006-2010, S-Max 2006-2013 plus Volvo S60 II, S80 II, XC60, XC70 II, V60, V70 III 2006-2013.

Professional Quality, ratchet action with high strength oval section telescopic aluminium handles for cutting soft copper and aluminium cables without crushing the cable. Four handle positions giving handle lengths of 400mm for easy storage, extending to a maximum 600mm for massive leverage. Design caters for working in cramped areas and handles feature hand guards.

Static or mobile louvre racks with wheels for storing plasic parts bins

Portable louvre panel racks on wheels for storage bins

Mobile bin trolley with 46 mixed medium & large bins

The Laser 6895 is a freewheel mechanism tool for BMW/Mercedes Benz for inactive intelligent servo module special design for both brands. Developed to allow the BMW and Mercedes Benz vehicles listed to be moved even with the gearbox/transmission locked. This unit is particularly useful when the transmission servo module fails preventing the transmission from being taken out of park. This tool is compatible with the following vehicles: Applications BMW: F01/F02 (7 Series), F10 (5 Series), F12/F13 (6 Series), F25 (X3), F30/F31/F32/F33/F34 (3 & 4 series) - PCD 120mm Silver Bolts Applications Mercedes-Benz: W164 (GL Class), W204 (C Class), W212 (E Class), W221 (S Class), W251 (R Class) - PCD

Bodywork Hammer / Tool Steel

Safety railing, made of flexible plastic, cross bars. Supplied = pre-assembled, final assembly by customer. Overall width = 225 mm. Overall height = 1200 mm. Material = plastic. Type of mounting = floor attachment. Model = cross bars. Base plate length = 225 mm. Base plate width = 225 mm. Weight = 8 kg. Place of use = indoor and outdoor use. Scope of delivery = includes fastening material. Flexible demarcation of walkways and improved guidance. Reduce risk of injury to personnel and damage to vehicles. Modular design. The modular design, which can be individually cut to size, always delivers the perfect solution. Posts Height x width: 1200 x 225 mm. Base plate: 225 x 225 mm. Rail: 63 mm.