Engine Oils

Product Performance Claims: ACEA C3 BMW Longlife-04 MB-Approval 229.31/ 229.51 Porsche C30 VW 504 00/ 507 00 Suitable for use in the following specifications: MB 229.52
Application: Castol EDGE 0W-30 LL is suitable fo petrol, diesel and hybrid cars and designed to meet the latest specifictions required by modern engines where the vehile manufacturer recommends an ACEA C3 0W-30 lubricant.
With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance. Engines are complex, with many moving parts – movement that can waste useful fuel energy th…

SAE 0W30 - ACEA C2
1 Litre

Car Engine Oil / Inhalt 1 l

OEM approved premium grade motor oil
SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
Keeps engine extremely clean by minimizing deposits. Provides ultimate protection against wear under all operating conditions
Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition

Valvoline Engine oil
This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers.
Oil for engine, oil, engine oil: for Golf IV Hatchback (1J1) 3.2 R32 4motion, for Golf IV Hatchback (1J1) 1.6 FSI, for Golf IV Hatchback (1J1) 1.8 T GTI, for Golf IV Hatchback (1J1) 2.0 4motion, for Golf IV Hatchback (1J1) 1) 1.6 US
Please select your vehicle from the drop down list to check compatibility with the product.

Liqui Moly engine flush plus is a highly effective cleaning fluid which is added to the engine oil prior to an oil change. It removes built up residues and deposits from the engine internals and holds them in suspension in the oil so that when it is drained the unwanted deposits are also drained. This allows the fresh oil to work to its full potential and it also stays cleaner for longer.Removes unwanted deposits, contaminants and residue from engine internalsSimply add to old engine oil before an oil changeExtends engine service lifeAllows fresh engine oil to perform to its maximum and stay cleaner for longerSafe for vehicles fitted with catalytic converters or particulate filters (DPFs)300ml …

A Vollsynthetisches 4-stroke engine oil
Its special formula is guaranteed to for high volume Anfahren stop in the city Road vital protection.
Specially designed for today's scooter engines, easily snaps around the exhaust emission standard Euro 4.
Thanks to a very low viscosity and additives of the newest generation this product provides Kraftstoffsparende.

Castor R is a combination of pure castor oil of the highest quality and special additives.
This special product is designed for 2-stroke and 4-stroke motorcycles for grassland and speedway races.
Castor R can be mixed with methanol, nitromethane and petrol.

Year-round protection, especially in salt air setting with high moisture.
Excellent adhesive capacity
Prevents Ölschlammbildung
Effective protection against wear features
Good foam cancelation

Formula V-Twin 20W-50 is a four-stroke engine oil from the special V-Twin range.
Due to its specific formulation it meets even the highest requirements of modern V-Twin 4-stroke engines
This exclusive, semi-synthetic formula exceeds the specifications of leading manufacturers and provides comprehensive protection for the engine under normal operating conditions.

Minimises smoke.
Minimises carbon deposits.
Prevents pollution of the spark plug.
Extends life of the engine. TT scooter is recommended for the regular roads as well as high performance use. Is suitable for premix / direct injection systems.
Mixing ratio: 2-4%. Strawberry aroma.

Minimises smoke formation.
Minimises carbon deposits.
Prevents dirt on the spark plug.
Extends engine life TT scooter is recommended for regular road and high-performance use. It is suitable for premix/direct injection systems.
Mixing Ratio: 2-4%

A fully synthetic four-stroke engine oil
Its special formulation ensures the protection required for frequent starting/stopping in city traffic.
Specially designed for modern 4-stroke scooters.

Fully synthetic engine oil with the revolutionary Ester Tech additives
The product ensures a high-strength oil film and highest compressive strength for extreme racing use
RS 959 is particularly suitable for 2-stroke engines with premix or intake manifold injection systems used for extreme racing
Mixing ratio: 2 - 4 %

Higher-power output.
A cleaner, more efficient combustion.
High-speed and high-temperature stability.
Optimum gas intake, even in wet weather.
Reduced fuel consumption.

Item Volume: 1 litres
Protects emission systems by helping to keep diesel particulate filters clean
Unsurpassed sludge protection no other motor oil can keep your engine closer to factory clean 1
Up to 2.1% greater fuel economy 2

Original febi bilstein spare part - Solutions „Made in Germany"
Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!
Volume: 4 litre. Recommended Use: MAN 3275. Recommended Use: MB 229.1. Recommended Use: MTU Type 2. Recommended Use: API CI-4/SL. Recommended Use: CAT ECF-1-a/ECF-2. Recommended Use: Deutz DQC-III. Recommended Use: Cummins 200 76 / 77 / 78. Recommended Use: MB 228.3. Recommended Use: ACEA A3/B3/B4. Recommended Use: Renault RLD-2. Recommended Use: ACEA E7. Recommended Use: Volvo VDS-3. Recommended Use: VW 501 01/505 00. Recommended Use: Mack EO-M PLUS. Oil Viscosity Classification SAE: 15W-40. W…

Original febi bilstein spare part - Solutions „Made in Germany"
Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!
Volume: 1 litre. Recommended Use: ACEA A3/B3/B4. Recommended Use: Mack EO-M PLUS. Recommended Use: Cummins 200 76 / 77 / 78. Recommended Use: Deutz DQC-III. Recommended Use: CAT ECF-1-a/ECF-2. Recommended Use: API CI-4/SL. Recommended Use: MTU Type 2. Recommended Use: MB 229.1. Recommended Use: MAN 3275. Recommended Use: Renault RLD-2. Recommended Use: ACEA E7. Recommended Use: Volvo VDS-3. Recommended Use: VW 501 01/505 00. Recommended Use: MB 228.3. Oil Viscosity Classification SAE: 15W-40. W…

Original febi bilstein spare part - Solutions „Made in Germany"
Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!
Volume: 1 litre. Recommended Use: API CI-4/SL. Recommended Use: ACEA A3/B3/B4. Recommended Use: MAN 3275. Recommended Use: MB 229.1. Recommended Use: MB 228.3. Recommended Use: Volvo VDS-3. Recommended Use: ACEA E7. Recommended Use: Allison C. Recommended Use: CAT ECF-1-a/ECF-2. Recommended Use: Cummins 20071/-72/-76/-77/-78. Recommended Use: Deutz DQC III-05. Recommended Use: Mack EO-M PLUS. Recommended Use: MTU Type 2. Recommended Use: Renault RLD-2. Oil Viscosity Classification SAE: 20W-50. W…

Lubricant, maintenance product and protecting agent for rubber, plastic and all metal parts
Plastic parts get a high gloss finish and rubber parts are maintained and protected
Temperature-stable from -50°C to +200°C
Anti-static, water-repelling and prevents oxidation

PRODUCT INFO: Modern multifunctional additive in engine oil - a viscosity stabilizer designed to restore oil pressure and reduce its consumption in engines with high mileage.
PRODUCT PROPERTIES: Anti-wear components minimize wear on engines with any mileage and extend their service life.
ADDITIONAL INFO: Suitable for petrol and diesel engines and all types of engine oils (synthetic, mineral, etc.).
APPLICATION: Add to fresh engine oil at each oil change after the engine reaches operating temperature.
ATTENTION: The contents of one container are sufficient for lubrication systems up to 5 litres of oil.

Mannol 2-stroke Universal is a high-quality mineral oil-based motor oil for 2-stroke air-cooled engines which use a separate lubricating system or direct blending with the fuel. High wear protection. To find the right mixing ratio, please follow the device manufacturer's instructions.
Oil for motorcycles/Scooters, etc. > motorbike oils.
API TC ISO L-EGB, JASO FB.
Item number: MN7205-20.

SPECIFICATIONS: SAE 0W-30 Bi-Synthetic Engine Oil
RECOMMENDATION: API SN Plus, API SP, ACEA C2, ACEA C3, BMW LL-12FE, MB 229.61, FORD WSS-M2C950-A, OPEL OV0401547, PSA B71 2290, PSA B71 2312
PRODUCT PROPERTIES: Innovative universal bi-synthetic (PAO+esters) premium engine oil for modern petrol and diesel engines with and without turbocharging.
ADDITIONAL INFO: Designed for petrol- and diesel-powered engines of MERCEDES-BENZ, FORD, BMW etc. passenger cars, lightweight off-road vehicles and light trucks that impose additional requirements for engine oils in accordance with the listed specifications and the preceding ones or where the performance level of API SP or lower and ACEA C2/C3 of the …