Chargers & Jump Starters

Compatible with AEG chargers: LM, LD, LI, LT 10/20 Cable length: 210 cm Diameter: 16 AWG For quick and easy connection

Sealey tools & Equiptment

PORTABLE CHARGER - Portable Type-2 charger is fitted with a 3-pin plug so can be used with any standard 13A socket. TIMING FUNCTION - Delay timing function enables users to program delayed start time to benefit from off peak electricity tariffs. LED SCREEN - The intuitive LCD screen offers users fault codes, charging time, power and temperature displays. SAFETY FEATURES - Safety features include over current protection, voltage protection, temperature protection, surge protection, leakage protection, ground protection. ADJUSTABLE CURRENT - 8A, 10, 13A Adjustable charging rates delivering 3.5kW of charge. IP65 RATED - Durable IP65 rated weatherproof design. VOLTAGE - 230V 1ph. CABLE LENGTH …

Innovative Heavy-Duty Connection System Compatible With Standard TM Connectors Reliable Weatherproof Connection 1/4" / M6 Ringlets Length: 50cm

Optimate Accessories TM-95 (KET)

ABSAAR PRO 4.0 6V / 12V 4A DC Fully Automatic Intelligent Connect & Forget Smart Battery Charger. Fully Automatic Intelligent Connect and Forget Smart battery charger. Does not require manual disconnection after charging. Suitable for charging up to 95 Ah and maintenance charge up to 140 Ah . Screen: Large LCD Display with compact design. Charging voltage 6V / 12V . Charging current 4 Amps Charges Standard Lead Acid Batteries & VRLA (AGM . Gel) Batteries including Start Stop (EFB & AGM) Batteries Desulphation function for old batteries. Wintermode for charging in low temperature. Wrong polarity and short circuit protection. Input voltage: AC230V Output Voltage (Charging Voltage): 6V /

ABSAAR PRO 8.0 12V 8A / 24V 4A DC Fully Automatic Intelligent Connect & Forget Smart Battery Charger Fully Automatic Intelligent Connect and Forget Smart battery charger. Does not require manual disconnection after charging (But if you switch off the charger then please must remove it) Suitable for charging up to 160Ah and maintenance charge up to 220Ah Screen: Large LCD Display with compact design Charging Voltage & Current 12V 8A / 24V 4A Charges Standard Lead Acid Batteries & VRLA (AGM . Gel) Batteries including Start Stop (EFB & AGM) Batteries Desulphation function for old batteries. Wintermode for charging in low temperature. Wrong polarity and short circuit protection. Input

Increases the grip on snow, sand, and unpaved ground Adjustable angle for use on uneven ground Foldable and therefore can be stored in the car with minimum space requirements Weight limit: 3500 kg each set. Material: polypropylene Size: 59 x 17.50 cm. Content: 2 pieces per set.

Battery protection The starter batteries remain functional even at extremely low temperatures Place the thermal case around the battery and secure it with the Velcro strap At -20 °C, the maximum extractable capacity is higher by approx. 20% compared to without protection against cold Remove of thermal battery case after winter season, in order to avoid overheating of the liquid

The world’s most advanced SELECTABLE battery charger for starter/deep cycle batteries. OptiMate 7 Select comes with a POWER SUPPLY mode for vehicle memory settings & more! Ideal for: STD, AGM, GEL & Deep Cycle 12V batteries from 3 – 240Ah. SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 10A (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging Special feature: POWER SUPPLY mode delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery.

Battery Suitable for all types permantente monitoring Prevents energy loss The engine always remains M3 Battery is charged always

The world’s most advanced 12V 10A & 24V 5A battery charger! OptiMate 7 12-24V is perfect for high performance starter & deep cycle batteries that demand temperature controlled charging & long maintenance! Ideal for: STD, AGM & GEL 12V (batteries from 10 – 240Ah) | 24V (batteries from 5- 120Ah). SAVE : Low Volt Start of 0.5V (12V) + 1-step desulphation recovery. CHARGING AMPS : 10A @ 12V / 5A @ 24V (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

- Battery voltage, current, power, ampere-hours consumed and state of charge - Remaining battery life according to current consumption Programmable relay to turn off non-crucial loads, or to start a generator if necessary. - A 500 amp quick connect shunt and a connection kit

AccuMate 6/12V Charger. Ideal for classic cars, motorcycles and many other uses. IDEAL FOR : 6V & 12V STD, AGM, GEL lead-acid batteries, starter and deep cycle, up to 50Ah LOW VOLT START: Low Volt Start of 2V for 6 or 12V batteries. CHARGING AMPS : 1.2A (temperature protected) Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

The world’s most advanced SELECTABLE battery charger for starter/deep cycle batteries. OptiMate 6 Select comes with a POWER SUPPLY mode for vehicle memory settings & more! Ideal for: STD, AGM, GEL & Deep Cycle 12V batteries from 3 – 144Ah. SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 6A (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging Special feature: POWER SUPPLY mode delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery.

Optimate 6 Ampmatic 6 Amp Automatic Smart Motorcycle Car Battery Charger Product Type: Battery Charger Brand: Optimate

The world’s most advanced fully automatic 12V battery charger! OptiMate 6 saves batteries that other chargers can’t by recognizing the difference between a discharged or sulphated battery Ideal for: AGM / MF, STD, GEL and spiral cell batteries up to 240Ah SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 5A (Ampmatic) Included Accessories: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

The world’s most advanced 12V & 24V battery charger! OptiMate 6 12V-24V is perfect for high performance starter & deep cycle batteries that demand temp. controlled charging & long term maintenance! Ideal for: STD, AGM & GEL 12V (batteries from 3 – 240Ah) | 24V (batteries from 1- 100Ah). SAVE : Low Volt Start of 0.5V (12V) + 1-step SAFE pulse recovery. CHARGING AMPS : 6A @ 12V / 3A @ 24V (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

Input cable length: 2m Output cable length: 2m Mounting: Easy direct wall mounting Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamps Lead for bench charging Warranty: 3 years

Compatible: CTEK MXS 3.6, MXS 5.0, MXS 5.0 Polar, MXS 5.0 Test&Charge Tough: hardwearing silicone bumper, designed and tested in Sweden Non-slip: Will help the charger grip on angled or slippery surfaces Enhanced grip: For easier handling of your CTEK charger Protects: Strong defence against accidental drops, scrapes and scratches. Easy to fit: this snug-fitting bumper is lightweight, flexible and simple to get on and off.

Product 1: Enables your car battery to be charged through a 12V cigarette socket Product 1: Compatible with all CTEK chargers up to 7A Product 1: Fits 12mm and 21mm sockets Product 1: Easy to fit and has a 60mm length cable Product 2: Easier connection: 2.5 metre cable, for connection to further away or hard to reach batteries Product 2: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 2: Secure: snug and safe connection via CTEK’s unique in-built connect system Product 2: Compatible: the Connect 2.5M Extension is designed for with CTEK chargers up to 10A output.