Chargers & Jump Starters

Solar panel charger for 12V batteries. Includes battery discharge protection when the solar panel doesnt output current to the battery.Generates a trickle-charge current to a 12V battery, an effective way to charge and maintain 12V batteries; prevents batteries from being damaged if they completely discharge.Max power: 4.5w; working current: up to 250mA. Weight: 825g.Solar panel size: 353 x 235 x 14mm. Housed in strong ABS plastic. Cable length: 2.2m (including J-plug).Accessories included: 12V car auxiliary power plug & J-plug, battery clip connector & J-plug, 4 suction cups to easily mount onto windscreen, glass sunroof or any suitable flat smooth surface.

The Gunson 77115 maintenance battery charger is a fully automatic, microprocessor controlled unit delivering a maximum charge rate of 2A . It is suitable for 6 or 12V batteries with capacities between 10AH to 80AH. It is a maintenance battery charger and as such is not suitable for charging severely discharged batteries. It charges in three stages, initially pulse-charging to assist with battery desulphurisation (if necessary), then brings the battery up to 100% capacity. The final stage is a maintenance pulse charge (float mode) which will maintain the battery in a fully charged state without overcharging. It features short-circuit protection, overload current protection, and over voltage protection.…

Portable 240v Mains EV Charger 8A-13A IEC 62196-2 Type 2 vehicle plug, complete with carry bag. Adjustable Current 8A, 10A, 13A (refer to instructions). Input voltage 220 to 250v, 3 pin standard UK mains plug. Resistance voltage: 2000v, Insulated Resistance >1000M , Contact Resistance < 0.5m . Fire Rating UL94 V-O, Waterproof rateing IP54, Working temperature -30Cto 50C. Cable specification 3 x 2.5mm, + 2 x 0.5mm. Charging gun cable length: 4.5m. Complete with 0.5m cable with BS Mains connection. Protection: Overheat, overvoltage, overcurrent, overcharge, electric leakage. WARNING: if using with extension lead, ensure extension lead load rating is not exceeded and lead is fully extended.

Capacity 2220mAh will start diesel engines up to 3.5L and petrol engines up to 4.5L. Can also be used as a power bank for a laptop/phone, includes 2 USB ports, 2 to 2 USB cable and 2 smart jumper clamps. Start current 350A, peak current 700A, charging time approx. 3 hours with charging indicator. Short circuit, overcharge, discharge, low voltage, reverse polarity protection. Supplied with a storage/carrying case.

The Warrior battery charger/conditioner is powerful, versatile and the perfect multi-purpose battery care product for your garage or workshop! It can charge and maintain 6v, 12v (lead acid, gel, and AGM batteries) and lithium (LIFEPO4) batteries, with specific automated programs for each type of battery. It is a fully fit and forget battery charger ideal for long-term maintenance and offers a wide charging range on all lead-acid batteries up to 120Ah and up to 36Ah on lithium batteries, including a low temperature charging mode for lead-acid batteries if the temperature is below -10°C.The charger is housed in a durable, hard-wearing plastic case to ensure it can take the rigors of being

Emergency starter for cars, vans, boats, forklifts, motorcycles etc.Will start petrol engines up to 6500cc and diesel engines up to 3000ccIncludes two LED lights, voltage display, two USB ports 5v, British Standard plug charger, 12volt charger weight 4.2 kg. 2 Alligator clips with 38cm jump wireSize: 16.5" x 11" x 14"CE Certificated, conforms to FCC and UL Warning label: charge this unit every three months or leave on permanent charge. Failure to do so will damage the battery. ; Ensure the Master switch (N) is on before charging.

12V 8A Auto battery charger/maintainer - This vehicle charger automatically performs the charging function in 9 stages. The first 5 stages perform diagnostics and recovery depending on the condition of the battery. After recovery a bulk charge brings the- LED Selectable modes; Motorcycle car winter start Calcium and DC output- Suitable for 12V Lead Acid batteries- Also provides 12V output including SLA WET AGM VRLA and Lead calcium- Power supply mode provides a 12V supply for powering appl- Battery clamp connectors- Ring terminal lead - Auxiliary power (cigar lighter) adaptorPTDCLA6267025

2V 2A Auto battery charger/maintainer - This vehicle charger automatically performs the charging function in three stages. The first stage provides a maximum charging current to reenergise a depleted battery. The second stage will take the charge from app- Suitable for 12V Lead Acid batteries including SLA WET AGM VRLA- Reverse polarity and overload protected- For use with 6Ah-40Ah lead acid batteries- Battery clamp connectors- Ring terminal lead - Auxiliary power (cigar lighter) adaptorPTDCLA6267015

An easy to carry heavy duty charger suitable for all types of 12V & 24V lead-acid batteries. The multiple intelligent charging stages diagnose recover maintain and condition the battery. Also featuring an alternator check to identify the output percentage of the vehicles charging system.Please note – Not Suitable for Lithium ion & Li-Po batteries- Suitable for 12V lead-acid batteries up to 500Ah and 24V up to 240Ah- 8 intelligent charging steps including desulphation to restore battery capacity- Digital illuminated screen display. Automatic battery voltage detection- Boost feature (12V) for faster charging and vehicle starting- Reverse polarity and overcharge protection. Anti-spark

An easy to carry heavy duty charger suitable for all types of 12V & 24V lead-acid batteries. The multiple intelligent charging stages diagnose recover maintain and condition the battery. Also featuring an alternator check to identify the output percentage of the vehicles charging system.Please note – Not Suitable for Lithium ion & Li-Po batteries- Suitable for 12V lead-acid batteries up to 400Ah and 24V up to 200Ah- 8 intelligent charging steps including desulphation to restore battery capacity- Digital illuminated screen display- Automatic battery voltage detection. Anti-spark protection- Boost feature (12V) for faster charging and vehicle starting- Reverse polarity and overcharge

The Clarke IBC20 is suitable for use with all types of 12V/24V lead acid batteries and can deliver up to 20A of charging. This unit benefits from a handy boost feature (12V) for faster charging and vehicle starting and this model can also charge batteries up to 400Ah in size.With LED colour indicators reverse polarity and overcharge protection this is a capable compact and lightweight charging solution.

The Clarke IBC15 is suitable for use with all types of 12V lead acid batteries and can deliver up to 15A of charging. This unit benefits from a boost feature (12V 15A) for faster charging and the IBC15 also has a 12V socket for conveniently charging other devices.With LED colour indicators reverse polarity and overcharge protection this is a capable compact and lightweight charging solution.

The Clarke IBC7 is suitable for use with all types of 12V/24V lead acid batteries and can deliver up to 7A of charging. This unit also includes detachable ring terminals and detachable battery clamps fitted with an inline fuse for added usage.The IBC7 can be used as a constant DC 12V power supply and can also charge batteries up to 200Ah in size.

This automatic battery charger is suitable for charging not only conventional lead acid batteries but also sealed gel and leisure batteries. This makes it ideal for use with caravans and boats as well as cars vans and large motor cycles.- 8A 12V output- Automatically cuts off when battery is fully charged- LED indication of charging state- Suitable for batteries with ampere hour ratings from 15Ah to 120Ah.- Fast/trickle charge- Reverse polarity and overload protectionPTDCLA6266315

This robust compact 12V vehicle battery charger is protected against thermal overload and reverse battery connection.- 6A 12V output- Ammeter indicated battery charge state- Double insulated- Suitable for lead acid batteries up to 60AhPTDCLA6266305

This robust compact 12V vehicle battery charger is protected against thermal overload and reverse battery connection.- 4A 12V output- Ammeter indicated battery charge state- Double insulated- Suitable for lead acid batteries up to 60AhPTDCLA6266300

Current Strength [A]: 15; Input Voltage [V]: 220; Charge Voltage, from [V]: 12; Charge Voltage, up to [V]: 24; Charging Profile: Li-Ion; Vehicle type: Passenger cars, Trucks; Supplementary Article / Supplementary Info Info 2: with adapter, with handle; Features: portable

Voltage [V]: 22; Mains frequency [Hz]: 50 - 60 Hz; Battery: Li-Ion Battery; Charging time [h]: 1-3; Max. charging current [A]: 2.3; Cable Length [m]: 2; Mains voltage (AC) [V]: 230 V

Features: 1.8m cable Suitable for 2.0Ah 3.0Ah 4.0Ah and 5.0Ah D20 batteries. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.PTDDRPDIR55913

Height [mm]: 40,1; Length [mm]: 134,5; DIN/ISO: IP44; Battery Capacity to [Ah]: 40; Output Voltage [V]: 12; Current Strength to [A]: 2; Battery Capacity from [Ah]: 3; Width [mm]: 74,4; Input Voltage, from [V]: 220; Input Voltage, up to [V]: 240; Mains voltage (AC) [V]: 230 V; Vehicle type: Passenger cars; Features: portable; Frequency range from [Hz]: 50; Frequency range to [Hz]: 60; Charging Profile: GEL, AGM