Other Sound & Hi-Fi

AXIS T8061 ETH Surge Protector: Robust Gigabit Network ProtectionSafeguard your valuable network infrastructure with the AXIS T8061 ETH Surge Protector. Designed to provide uncompromising protection for your indoor Ethernet networks, this essential device shields your equipment from damaging electrical surges and lightning strikes. In today´s connected world, where network cameras, IP phones, and other smart devices are critical assets, the AXIS T8061 offers peace of mind by preventing costly downtime and hardware damage caused by unexpected power fluctuations.Engineered for excellence by Axis, a leader in network solutions, this surge protector is the first line of defense for any critical P…

AXIS T91D62 Telescopic Parapet Mount is made for parapet and wall installations when the requirement is to place the camera further out from the wall. To compensate for different parapet thicknesses or obstructive elements on the facade of the building. the arm length is adjustable. Its ability to swivel 180 degrees on its own axis. allows for easy and safe mounting/maintenance of the camera from a rooftop. The mount is intended for outdoor fixed and PTZ dome cameras supporting 1.5” NPS thread. A retrofit mounting bracket (optional accessory) makes it possible to reuse holes drilled for Pelco’s PTZ dome parapet mount. Axis 5507-271 camera mounting accessory

- Escutcheon ring designed to improve the installed look of a ceiling or floor mounted pole;N/A- Cane be retro-fitted to poles using split design for easier installation;N/A- Attractive appearance when used with a suspended ceiling;N/A- Designed for 50mm poles only;N/A- POLE SOLD SEPARATELY.

Small AV Storage Cradle
The BT7780 is a compact AV storage cradle ideal for storing small AV devices such as media players and digital signage units. The cradle can be easily mounted to ?50mm poles using B-Tech's accessory collars directly attached to System X rails and columns or to the rear of a screen mount. The BT7780 can also be wall mounted using a VESA 100 screen mount. Its open-framework design ensures optimal airflow to keep stored devices cool while providing secure protection preventing any unauthorised removal.

• Ideal for storing AV devices such as media players and digital signage units
• Can be fixed to ?50mm poles using BT7052/BT7841 Accessory Collars
• …

Thermal Imaging Camera Ceiling Mount
As economies around the world begin to open up again safety protocols and “best-practices” must be followed to ensure safe operating procedures for employees and customers alike. The BT5701 provides an ideal solution for implementing such protocols into retail environments.

• Features 100 x 100mm fixing points
• Fits most cameras with 1/4inch thread
• Integrated cable management through the top or side of the mount
• Includes cover plate for a neat and tidy installation

• Designed to wall mount VC cameras
• Fits most VC cameras with 1/4inch thread
• Features 100 x 100mm fixing points
• deal for Radvision XT5000 Codec

Please Note: The colour of this model is Black and Silver
- Features
- Bracket Type Wall
- Colour Black / Silver
- Max Weight 4 KG

The BT7879 is a versatile mounting plate that allows the users to fit a videobar/UC equipment (including Biamp-s Parlé VBC 2500/2500A, ABC 2500/2500A, SBC 2, and Lenovo ThinkSmart One) to a range of B-Tech products, such as stands and trolleys. BT7879 is Designed to mount a variety of video bars onto B-Tech stands and trolleys Compatible with BT7052/BT7841 collars for use with Ø50mm poles Slide to position up/down on the column/poles Can use BT8390-SA to mount above or below any screen on a System X Rail (BT8390) Use BT7034 for mounting above/below B-Tech Media Storage Mount (BT7883/BT7885) Use with BT7031 to mount above/below compatible B-Tech Flat Screen Wall Mounts (BT8431/BT8432/BT8441/BT8442/BT9901/BT9903) Id…

Designed to fit BT8390 mounting rails to BT8380 support columns the BT8380-JPK is a joining plate which is needed to assemble System X freestanding mobile or bolt-down video wall solutions. The plate is fitted quickly and easily using the provided sliding nuts and countersunk screws which allow the mounted rail to be positioned anywhere along the length of the column. A row height spacer (BT8390-SP) is also available (separately) to help position multiple rails when installing video walls without needing to measure out the position of each BT8380-JPK.

• Used for a variety of different fixed freestanding or mobile video wall installations
• Also ideal for single and twin screen …

System X™ Column Mounting Plate
Designed to fit BT8390 rails to BT8380 columns the BT8380-JPR is a joining plate that allows a rail to be reversed mounted onto a column ideal for when installation of additional AV accessories require the use of the channels on the rail. Installation is simple using the provided sliding nuts allowing the mounted rail to be positioned anywhere on the column. The BT8380-JPR can also mount a BT8390 rail in a standard front facing position or can be reversed depending on the type of install.

Features:
• Used for a variety of fixed freestanding or mobile installations
• Sliding nuts allow rails and columns to be positioned as required
• …

Designed to specifically secure the popular Chromecast media streaming device to any TV or appliance. Its integrated cover shields keep cables tidy and prevent device tampering. Designed to mount the Chromecast securely to any TV or other appliance Integrated cover shields on the plate prevent device tampering Simple installation

Premium Bolt Down Single Screen Twin Column UC Stand - 2m
The BT8708 is a 2m tall premium flat screen display stand which can be customised with a variety of optional accessories such as VC shelves and media storage solutions. As part of B-Tech’s Mode-AL brand of high-end display solutions the BT8708 features a premium aesthetic which is perfectly suited to corporate office spaces and UC applications such as in boardrooms or conference facilities. Designed to mount XL screens at a fixed location the stand bolts to the floor with a minimal footprint and features integrated cable management to ensure a smart and stylish installation which is in keeping with the high-end contemporary aesthetic.…

Premium Floor-To-Wall Single Screen Uc Stand - 2MThe Bt8701 Is A 2M Tall Premium Flat Screen Display Stand Which Can Be Customised With A Variety Of Optional Accessories Such As Vc Shelves And Media Storage Solutions. As Part Of B-Tech’S Mode-Al Brand Of High-End Display Solutions The Bt8701 Features A Premium Aesthetic Which Is Perfectly Suited To Corporate Office Spaces And Uc Applications Such As In Boardrooms Or Conference Facilities. Designed To Mount Screens Close To The Wall The Stand Bolts To The Floor With A Minimal Footprint And Features Integrated Cable Management To Ensure A Smart And Stylish Installation Which Is In Keeping With The High-End Contemporary Aesthetic.• Designed …

Mounting Plate for Bose Videobar VB1 Neat.Bar / Neat.Bar Pro Yealink MSpeaker II & Logitech Rally Plus
• Designed to mount Bose Videobar VB1 / VBS Neat Bar Neat Bar Pro video bars and Yealink Mspeaker II
• Can also mount Logitech Rally Plus Dual Speakers using 2x BT7877
• Mounts directly to a BT8380 or BT8381 column
• Compatible with BT7052 / BT7841 Collars for use with ?50mm Poles
• Use with a BT7031 Adjustable Mounting Arm to mount on to a BT8431 / BT8432 / BT8441 / BT8442 / BT9901 / BT9903 Flat Screen Wall Mount
• Use with a BT8390-SA Adjustable Mounting Arm to mount above or below a screen mounted on a BT8390 System X Rail
• Simple …

The BT7874 is designed specifically to mount the Logitech Rally Plus speakers to a range of B-Tech products. The versatile mounting plate can position the speakers above or below screen by fixing either to a B-Tech column, on to a System X rail or a flat Designed to mount a variety of video bars onto B-Tech products Use with BT7031 to mount above/below B-Tech Flat Screen Wall Mounts Can use BT8390-SA to mount above or below any screen on a System X Rail Mounts across a single or dual BT8380, BT8381, or BT8385 column Compatible with BT7052/BT7841 Collars for use with Ø50mm Poles Uses BT7034 for mounting above/below B-Tech Media Storage Mounts Simple installation All mounting hardware included

Mounting Plate for Logitech Rally Bars
The BT7873 is designed specifically to mount a Logitech Rally Bar or a Logitech Rally Bar Mini to a variety of B-Tech products. The mounting plate allows the video bar to be mounted above or below a screen and can be fixed to B-Tech columns (BT8380 BT8381 or BT8385) single or twin ?50mm poles using a B-Tech collar a System X rail using a BT8390-SA or onto a compatible flat screen wall mount using a BT7031 able Accessory Mounting Arm.

• Designed to mount the Logitech Rally Bar or Rally Bar Mini to a variety of B-Tech products
• Mounts across a single or dual BT8380 BT8381 or BT8385 columns
• Use with a BT7031 Adjustable Mounting Arm …

Mounting Plate for UC / VC Video Bars
The BT7871 is a versatile mounting plate that allows the user to fit a videobar / UC equipment (including Poly Studio X50 Neat Bar Bose Videobar Jabra Panacast cameras) to a range of B-Tech products such as Mode-AL stands and trolleys. BT7871 is also compatible with a range of B-Tech component products such as Accessory Collars for pole-mounted solutions or a BT8390-SA Adjustable Arm to mount a videobar above or below any screen mounted on a System X Rail

• Designed to mount a video bar such as Poly Studio USB X30 or an X50 (via a Poly Studio wall mount) onto a Mode-Al stand System X rails / columns or to a B-Tech accessory collar for pole mounting …

Mounting Plate for Yealink A30 / MeetingEye 600 & VC Cameras
The BT7878 is a mounting plate designed for mounting a Yealink A30 or MeetingEye 600 video conferencing camera to a variety of B-Tech products. Using an Accessory Mounting Arm the BT7878 can be positioned above or below a screen mounted on a compatible B-Tech Flat Screen Wall Mount or to a System X BT8390 Rail. The mounting plate can also be pole mounted using ?50mm Collars or alternatively can attach directly to a B-Tech Column. The BT7878 platform is also suitable for mounting VC cameras.

• Designed to mount Yealink A30 and Yealink MeetingEye 600 to a range of B-Tech products
• Universal mounting slot for VC cameras …

The BT7033 is a stylish black accessory shelf that can be mounted directly to a wall or across a wide range of B-Tech products such as System X rails and columns shelf adaptors and also accessory collars to allow for pole mounting. The shelf can be mounted across one or two poles and includes fixing points for VC cameras using 100 x 100mm fixings.

• Can be mounted directly to; walls and System X rails/columns or to B-Tech accessory collars for pole mounting
• Compatible with BT7052 / BT7841 collars for use with ?50mm or ?60mm poles (all sold separately)
• Can be mounted on a single or double pole (use 1 collar for single poles 2 collars for double poles)
• Can also …

Available in Black Silver or Chrome
500mm length other lengths available up to 3m
Can be cut to length if required
Poles are internally unobstructed to allow cables to pass through easily
Features safety bolt holes at top and bottom for secure installation
Poles can be linked together using BT7823 or BT7824 Joiners
Includes BT7057 pole ring
- Features
- Bracket Type Pole
- Colour Chrome

•Designed for use with CCTV cameras
•Fits all B-Tech 50mm poles
•Unique carousel mount for simple installation
with all mounting hardware included
•Distance between any 2 fixing points on CCTV camera:
min: 63.5mm (2.5”) max: 103.5mm (4.1) including VESA 75 x 75mm
•Maximum weight 25kg
- Features
- Bracket Type Ceiling
- Colour Silver

•Small ceiling plate with attractive finish
•Cable management
•Cover plate included for smart installation
•Ceiling plate diameter: 150mm
•Ceiling drop: 600mm - 1000mm in 25mm increments
•Longer drop available using BT7823-Pole Joiner and any BT7850-Pole

•Max Weight: 90kg (198lbs)
•Ceiling Plate Diameter: 150mm
•Ceiling Drop: 600mm – 1000mm in 25mm increments
•Colours Available: Black Silver
•Registered Design Number: 4003650
- Features
- Bracket Type Ceiling
- Colour Black

Ceiling / Wall Mount with Tilt for use with 50mm Poles – white
Designed to ceiling mount ?50mm poles the BT7808 features an adjustable tilt mechanism with a tilt range of up to 90?. This makes it ideal for mounting flat screens and projectors to flat or angled ceilings and also allows wall mounted installations in both portrait or landscape configurations.
- Features
- Colour White
- Max Weight 140 KG

Heavy Duty Ceiling Mount White
Heavy Duty Ceiling Mount White

Made from heavy duty 6mm thick steel the BT7822 is a robust mounting solution designed to mount ?50mm poles to the floor or ceiling. Capable of supporting heavy loads it is the ideal solution for ceiling mounted flat screen or projector installs ranging from basic setups to complex installations that feature multiple screens or AV components.

Features

• Can be used to mount a ?50mm pole to the ceiling or to the floor
• Heavy duty steel capable of supporting substantial loads
• Multiple grub screws allow micro-adjustment of the pole to ensure a perfectly angled drop
even with heavy loads attached
• …

Features• Poles Are Internally Unobstructed To Allow Cables To Pass Through Easily• Features Safety Bolt Holes At Top And Bottom For Secure Installation• Poles Can Be Linked Together Using Bt7823 Or Bt7824 Joiners• Includes Bt7057 Pole Ring• Cut To Length Service Available Please Contact Us For Details• Lengths Available: - 0.25M - Bt7850-025- 0.5M - Bt7850-050- 1M - Bt7850-100- 1.5M - Bt7850-150- 2M - Bt7850-200FeaturesBracket TypePole ColourChrome Pole Length2M