Other Sound & Hi-Fi

The Cisco ATA 190 Analog Telephone Adaptor is a handset-to-Ethernet adaptor that turns traditional telephone devices into IP devices (Figures 1 and 2). Customers can take advantage of the many new and exciting IP telephony applications by connecting their analog devices to Cisco ATAs.

The Cisco ATA products are standards-based communication devices that deliver true next-generation voice-over-IP (VoIP) terminations to businesses and residences worldwide. The Cisco ATA 190:

- Protects existing telephone investment: The Cisco ATA 190 supports two voice ports (RJ-11 phone ports) each with its own independent telephone number and a single RJ-45 10/100 BASE-T Ethernet port. Each port supports …

Cisco C9300-NM-4M= network switch module 10 Gigabit Ethernet. Gigabit Ethernet

This module has eight Multigigabit Ethernet (mGig) module slots.

The C-NIM-4X is a Next-Generation 1G/10G LAN/WAN module with local Layer 2 switching capabilities on all four ports. This provides a price-effective low-density 4-port Layer 2 LAN switch with capacity for switching four Small form-Factor Pluggable (SFP)/SFP+ ports at speeds up to 10 Gbps. The two highest-numbered ports can be configured for native Layer 3 operation. Configuring ports for Layer 3 will provide full feature parity with the routers embedded WAN ports. This module provides high-speed WAN connectivity through four ports supporting serial gigabit media-independent interface (SGMII)/1000BASE-X-based SFP and 10GBASE-R-based SFP+ pluggables. A 100-Mbps optic pluggable connection can also …

SPARE

MERAKI 1025WAC PSU

Cost-effective switches perfect for retail point-of-sale (PoS) setup and low-density branch Wi-Fi and IoT deployments.

EXHAUST AIRFLOW SPARE

PORT SIDE INTAKE AIRFLOW

PORT SIDE EXHAUST

PORT SIDE INTAKE

CPD-9 19 8-Way IEC Power Distributor
Protect your equipment and organise your power distribution with this 19 rack mounting unit. The front panel features a digital voltage meter and two LED lamps with dimmer control for illuminating your rack.

• 19 1U rack mountable
• 8 rear and 1 front IEC outlets
• 2 front mounted LED lamps with dimmer control
• Digital voltmeter displays incoming line voltage
• Surge protection
• 10A capacity with circuit breaker

Heavy Duty Waterproof Equipment Case
A heavy duty moulded equipment case made from high density ABS material and filled with pluck foam to allow cut-outs to be formed for the equipment being stored or transported. Fully sealed with an integral gasket for waterproofing the case is sealed using 2 lever clamps and can be carried by it's folding soft-grip handle. If you care about your gear you need to care about what it is transported in.

Features:
• High density impact-resistant design
• IP66 waterproof
• Pressure equalisation valve
• Segmented foam interior

The Citronic Studio Swivel Microphone Boom Arm is a professional microphone boom arm with desk clamp for studio or broadcasting use. Featuring spring retraction for quick and smooth positioning and a lockable hinge for safety.FeaturesRotates 360°Features spring retraction and a lockable hingeMicrophone clip suppliedFor desks with a maximum depth of 50mmSpecificationsWeight: 360g / 690gMax. weight load: 450g / 550gHorizontal reach: 720mm max. / 1010mm max.Vertical reach: 710mm max. / 990mm max.Thread adaptor: 3/8" / 5/8"Colour: BlackClamp aperture: 50mm

The Citronic Studio Swivel Microphone Boom Arm is a professional microphone boom arm with desk clamp for studio or broadcasting use. Featuring spring retraction for quick and smooth positioning and a lockable hinge for safety.FeaturesRotates 360°Features spring retraction and a lockable hingeMicrophone clip suppliedFor desks with a maximum depth of 50mmSpecificationsWeight: 360g / 690gMax. weight load: 450g / 550gHorizontal reach: 720mm max. / 1010mm max.Vertical reach: 710mm max. / 990mm max.Thread adaptor: 3/8" / 5/8"Colour: BlackClamp aperture: 50mm

Allows the mounting of the Z series filter holder to lenses with a 67mm filter mounting thread on the front.

Allows the mounting of the Z series filter holder to lenses with a 82mm filter mounting thread on the front.

Features:
• 95mm Adapter ring for the Cokin Z-Pro (L) Series Filter system.

The Z4101 adapter ring allows you to use the Cokin NX-Series filter-holder with your Nikkor Z 14-24mm F2.8 S lens. The ring is precision machined in anodized aluminum and its design is optimized to reduce as much as possible the risk of vignetting and to get rid of a cumbersome filter-holder system of 150mm type. At the 14mm focal length we can see a minimal vignetting in the corners of the image which can be easily removed when developing the raw NEF file with an image processing software such as Lightroom. With this Adobe software we recommend ignoring the built-in lens profile of your Nikon Z hybrid camera and selecting the correction profile of the old Nikon AF-S NIKKOR 14-24mm f/2.8G ED …

Allows the mounting of the Z series filter holder to lenses with a 52mm filter mounting thread on the front.

Allows the mounting of the Z series filter holder to lenses with a 58mm filter mounting thread on the front.

Features:
• 62mm Adapter ring for the Cokin Z-Pro (L) Series Filter system.

Allows the mounting of the Z series filter holder to lenses with a 72mm filter mounting thread on the front.

Allows the mounting of the Z series filter holder to lenses with a 77mm filter mounting thread on the front.