Drill Chucks

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 16 mm

The DT4920 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 3mm • Length: 61mm • Working length: 33mm • Pack Quantity: 10

Multipurpose Drill / 1 Piece / 8 mm Drill Diameter / Metal

Note: Image is for illustrative purposes only and may differ from the actual product

High quality bits for Phillips screws. Tough viscous for universal use. Thread drive M 5. Features and Benefits • For Phillips screws • Ductile and tough for hard materials • Thread drive M 5 (Wera connecting series 12) Contents 851/12 Bits, PH 2 x 33 mm

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 15 mm

High quality combination tapping drill bits for drilling, tapping and deburring. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for great durability. The very good centring properties, perfect chip removal and a low tilt risk ensure pleasant working. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 847 HSS Combined Tap Bits, 4.2 x 41 mm

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 13 mm

Supplied in a compact and durable, easy to carry plastic case
Contains 32 x 25mm Screwbits: PZ0, 2 x PZ1, 6 x PZ2, 2 x PZ3, PH1, PH2, PH3, T15, T20, HEX3, HEX4, HEX5, HEX6, SL0.5x3.0, 3 x SL0.8x4.0, SL0.8x5.0, 2 x SL1.0x5.5, SL1.0x6.0, 3 x SL1.2x6.5, SL1.2x7.0
Drywall Bit C-form 30mm
Magnetic Bit Holder ¼” Hex 60mm
7 x 38mm Nut Setters: 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0
Countersink 36mm
6 x Wood Drill Bits: 3.0x60, 4.0x75, 5.0x85, 6.0x92, 7.0x100, 8.0x114
7 x HSS-TiN Metal Drill Bits: 2x49, 2 x 3x61, 3.2x65, 4x75, 4.5x80, 6x100, 7x100,8x120

Tough viscous Wera bits for Pozidriv screws for universal use, with thread drive M 4. Features and Benefits • Suitable for Pozidriv screws • Ductile and tough for hard materials • Thread drive M 4 (Wera connecting series 11) Contents 855/11 Bits, PZ 2 x 33 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 14 mm

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

Universal holder for the take-up of bits with ¼" hex head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. The particularly strong retaining ring ensures an optimum fixing of the tool in the holder. The especially strong permanent magnet makes sure that the bits are held absolutely securely. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Universal holder for the take-up of bits with 1/4" hexagon head drive • Stainless sleeve, retaining ring and strong permanent magnet • 1/4" hexagon drive (Wera connecting series 4) • Strong retaining ring for optimum fit of the tool in the holder • Strong permanent ma…

High quality combination tapping drill bits for drilling, tapping and deburring. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for great durability. The very good centring properties, perfect chip removal and a low tilt risk ensure pleasant working. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 847 HSS Combined Tap Bits, 5 x 44 mm

High quality combination tapping drill bits for drilling, tapping and deburring. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for great durability. The very good centring properties, perfect chip removal and a low tilt risk ensure pleasant working. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 847 HSS Combined Tap Bits, 2.5 x 36 mm

Maximum-Precision Deep Holes - The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling deep holes in alloyed and non-alloyed …

Cyl-3 Drill Bit Provides Lasting Performance When Drilling In Concrete As Proof Of Quality, The Drill Bit Bears The Test Mark Of The Pgm Masonry Drill Bit Association Board, Guaranteeing Compliance With Tight Tolerances, Exact Drilling And The Firm Hold Of Fixings. It Is Compatible With Cylindrical Shank Systems For All Corded Or Cordless Impact Drills.Features: - Effective 2-Flute U-Shape Design Provides Good Dust Removal, Reducing Friction And Extending Lifetime- Lasting Performance When Drilling Holes For Fixings In Abrasive Materials Such As Concrete And Natural Stones- Pgm Guarantee In Compliance With Tight Tolerances, Exactly Drilled Holes And Firm Hold Of Fixings- High Wear Resistance …

Impeller cutting edge with 3 blades for more effective material removal, increased power transmission thanks to shaft-form head design, extremely long service life thanks to extremely wear-resistant single-phase tungsten carbide alloy, stable head geometry due to embedded tungsten carbide head, optimised low-vibration triple spiral, DuraTec hardening technique, certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the Deutsches Institut für Bautechnik. (DIBt). Fields of application: for granite, concrete, clinker, stone, brickwork and marble. In all hammer drills with SDS-plus adaptor and 2-groove adaptor such as Hilti TE 10-22.Specifications:- Ø: 8,0 mm-…

High-performance twist drill with brazed-on HM cutting inserts made from K20 fine grained material. It is suited for universal applications and for high-strength steel. Continuous cooling is required when drilling into high-strength steel. Highly recommended for machining cast iron.Specifications:- Ø: 3,3 mm- Total length L1: 65,0 mm- Flute length L2: 36,0 mm- DIN: 338- Material: Tungsten carbide- Cutting: direction right hand cutting- Shank: cylindrical- Drilling depth: 5 x D- Point cut: Shape C: Split point- Point angle: 120°- Helix angle: 25-30°- Tolerance: h8- Profile of flute: normal- Core: normal

Features:- Cylindrical shank compatible with three-jaw drill chucks.Specifications:- Diameter mm: 20.0- Step height- M: 10- Total length mm: 45- Shank diameter inch: 1/4- Shank diameter mm: 8

- 30 Solid Bits In Various Sizes For Safety Screws With Various Drives, 25 And 50 Mm, Incl. Hand Screwdriver- ¼´´ Hexagon Drive (Shank To Iso 1173 – E 6.3/C 6.3)- High-Quality, Compact Metal Cassette With A Modern DesignSpecifications:Properties- Large Solid Bit Assortment For Repairing Electrical Appliances - Contains 3 Solid Bits, 25 Mm, For Screws With Square-Plus Drive (Size 0 / 1 / 2) - Contains 3 Solid Bits, 25 Mm, For Crosshead Screws With Phillips® Drive (Ph 1 / 2 / 3) - Contains 5 Solid Bits, 25 Mm, For Screws With Hexagonal Drive With Bore Hole (Size 2 / 2.5 / 3 / 4 / 5) - Contains 2 Solid Bits, 25 Mm, For Screws With Torx® Drive (Size 6 / 7) - Contains 2 Solid Bits, 25 Mm, For Scr…

Hole Saw / 1 Piece / 19 mm Drill Diameter / Metal