Drill Chucks

Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again.The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features:- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teeth Made From Fine, Hard Carbide.- Special Slot Design For Better View And Plug Ejection.- Long Life Cutting Holes In M…

Bosch SDS MAX masonry drill bits with Quadro-X drilling head with four cutter geometry for the toughest applications. Features and Benefits 4-cutter, vacuum brazing and hardening. Long lifetime/No jamming in rebar. Highly durable carbide. Good lifetime/wear resistance. Suitable for concrete and reinforced concrete and masonry. Can be used in all rotary hammers with SDS-max holder

Drill.25 x 400 x 450mm.SDS plus-5 rotary hammer drill bits:Effortless drilling in concrete.The SDS plus-5 drill bit allows for effortless drilling.Compatible with all SDS plus rotary hammers.Activeteq centering tip guides the drill for easy starting without shaking or shifting.AWB welding and hardening technology reduces vibration and user stress Wear mark for precise drill diameter.PGM certified quality.Made in Germany.Effortless drilling in concrete.

The Irwin IRW10502785 Auger bit - long series has the following dimensions:Drillbit diameter: 35.0mmTotal length: 400mmWorking Length: 323mm

Self feed drill bit for drilling large diameter holes in wood. Specifications • Diameter: 68mm

SDS-plus / Carbide

This Irwin Blue Groove Drill Bit Set contains a selection of Blue Groove 4X Flat Drill Bits and Blue Groove 6X Auger Drill Bits. All bits are heat-treated for maximum durability. The Blue Groove design allows them to cut smoothly without scraping the timber. They have an optimised design for maximum chip ejection and a quick-release hex shank. Supplied in a handy, heavy-duty container with the following bits: 5 x Blue Groove 4X Flat Drill Bits (152mm Long): 12, 16, 18, 20, 22mm 3 x Blue Groove 6X Auger Drill Bits (165mm Long): 22, 25, 32mmAdditional Information:• No. Pieces: 8

Irwin extension bar for Auger drill bits to lengthen the reach of a drill. The hex shank prevents the extension slipping in the chuck.The IRW10502789 extension for Auger drillbits has the following specifications: Length: 450mm. Suitable for drill diameters 10-25mm.Additional Information:• Overall Length (mm): 450• Working Length (mm): 450• Pack Qty.: 1

Time-saving: no long searching thanks to bright coloured bit, low bit change time thanks to long service life. Automatic opening at the touch of a button and easy bit change directly in the holder
High performance, long life = thanks to a guarantees 120 times longer life (compared to Wiha Standard bit)
Reduces your costs: bit can be found quickly and easily thanks to red colour marking – with UV light even in dark environments

The BOSCH PROFESSIONAL SDS Plus-5 18x550x600 Wall Hammer Drill Bit is a high-quality electric tool accessory designed for use with rotary hammer drills. This grey colored drill bit features an SDS Plus shank design, making it easy to attach and remove from the drill quickly and securely.With a diameter of 18mm and a length of 550mm, this drill bit is ideal for drilling through masonry, concrete, brick, and other tough materials. The carbide tip ensures long-lasting durability and efficient drilling performance, while the 4-cutter geometry helps to reduce vibration and improve drilling accuracy.Whether you're a professional contractor or a DIY enthusiast, the BOSCH PROFESSIONAL SDS Plus-5 Wall …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features and Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

The IRWIN SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more …

The DEWALT SDS Max Drill Bit has a 4 cutter X-head design for improved user comfort, reduced vibration and improved hole quality. The 4-flute spiral maximises flute entry which increases drilling speed and debris removal with a heavy-duty shank for maximum durability. PLEASE NOTE - Due to the size of the bits, 12mm & 14mm are 2 cutter only. 1 x DEWALT SDS Max Drill Bit 16 x 340mm

A 10 Piece Robust Line Metal Drill Bit Set manufactured from High Speed Steel Cobalt to DIN 338, 135. In diameters 1.0 - 2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 7.0 - 8.0 - 9.0 - 10.0mm. - Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm, stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels - Precision drill bits that are resistant to heat and wear

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.On Easily Cut Materials The Varied Toothing Ensures That The Cut Is More Even And Requires Less Effort. The Reduction In Vibrations And Heat Development During Cutting Achieves Up To Three Times The Tool Life. Suitable For Unalloyed Steel (Up To 700 N/Mm² Strength), Non-Ferrous And Light Metals, Plastics, Plasterboard And Light Building Boards, Fibreboard, Plywood And Wood.Specifications:- Material: Hss- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Angle: Work´S Specification- Ø: 111,0 Mm- Ø (Inch): 4 3/8 Inch- Weight: 0,41500 Kg

The DEWALT DT70710 Extreme 2 Metal Drilling Set for portable or stationary drilling of steel, alloyed and non-alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Specifications Portable or stationary drilling of steel, alloyed and non-alloyed Thickness: up to 900N/mm Dimensions: D 3.1 x W 21.9 x H 28 cm approx. Colour: Yellow …

Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again.The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features:- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teeth Made From Fine, Hard Carbide.- Special Slot Design For Better View And Plug Ejection.- Long Life Cutting Holes In M…

Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again. The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole Special Slot Design For Better View And Plug Ejection. Long Life Cutting Holes In Multi Material For Use With The Bosch Power Change Plus Keyless Arbor: Offering Accuracy And Robustness.Specifications:- Working Leng…

Long Lifetime - The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (…

• Fully ground HSS drill bits designed to reduce friction and heat.• 135° Split point enables bits to bite workpiece to start drilling.• Efficient clog-free swarf clearance.• Ideal for use on high carbon steels, copper and plastics.• Sizes: ø1-13mm in 0.5mm increments.• Supplied in display case.Fully ground HSS drill bits designed to reduce friction and heat. 135° Split point enables bits to bite workpiece to start drilling. Efficient clog-free swarf clearance. Ideal for use on high carbon steels, copper and plastics. Supplied in display case.• Fully ground HSS drill bits designed to reduce friction and heat. • 135° Split point enables bits to bite workpiece to start drillin…

Small tough case / system set
Connectable case allows multiple sets to be stacked and locked together
Tstak compatible to hold all your accessory sets in one place / compatible with the Tstak system via the caddy and large tough case
Toughcore: tapered central core increases stability and durability, minimising breakage

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

Long Lifetime - The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (…

The Lenox T3 Bi Metal Speed Slot Hole Saw features a patented vari-tooth design which optimises cutting for fast cuts and long tool life. The increased wall thickness improves durability and minimises tooth loss, optimised tooth design penetrates metal with ease. Features & Benefits • 50% longer life. 2X more durable • 10% thicker wall adds strength and durability • Improved metal cutting performance • Increased wall thickness improves durability and minimizes tooth loss • Optimized tooth design penetrates metal with ease • Fast, efficient cutting in wood • Larger, sharper teeth remove more wood for fast cutting • Easy plug removal • Speed Slot staircase …