Multimeters

SMART technology – the meter recognizes the measured parameter itself and automatically adjusts the measurement range (AUTO RANGE) of direct and alternating voltage, diode test or resistance SELECT – switch functions for non-contact NCV / capacitance / frequency / current measurement TRUE RMS measurement of alternating current and voltage – precise determination of the effective value of current for both sinusoidal and distorted waveforms NCV enables non-contact detection of current in conductors / Built-in flashlight allows you to work at night and in the dark / The set includes test leads DATA HOLD allows you to store the currently measured value on the display The multimeter allows you to…

The compact design of this multimeter makes it ideal for electrical engineers and electricians. It can be used to measure AC/DC voltage, DC current and resistance. It can also be used to carry out a diode and audible continuity test. It features a function selection switch and a 5 position rotary switch for range selection. Integral test probes clip neatly to casing for storage. Main features include: Digital LCD display Full overload protection Auto power off and low battery indicator Supplied with storage case and 12V battery

Nominal current: 11 A and 44/100A Maximum voltage to ground: 1000-Volt

This is a cost-effective and widely used transistor detector. You can use it to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, triac and battery etc.  Features: It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc. It also can detect zener diode and has the function of self-calibration. After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form. One button operation, automatically detect

Ultra-portable tools for advanced electricians. AC DC power can be tested quickly, accurately and safely without damaging the insulation on the line surface. NCV measurement, the gear position is adjusted to the NCV, when the non-contact voltage sensing area is close to the circuit to detect the AC voltage, the clamp meter will display the buzzer alarm sound of different frequencies according to the detected voltage intensity. Maximum display: 5999. Compared to similar products, has a precision of 0.01uA for a larger measuring range. LCD display: clear reading, backlit function, clear reading in dark environments Flashlight illumination: for easy measurement in dark environments Double …

Features: The phase tester is used to measure the opening phase condition and order through LED and buzzer. With high performance, the phase tester can check a large of range of AC three-phase(60V~600V). 3-color double insulation test leads, with approximately 1 meter length. Equipped with 3 alligator clips to involve the terminals of the control panel to be tested, guarantee reliability and safety. The tester is small, light and portable, it is designed to facilitate the operation to the maximum. Design with lanyard for hanging on wrist to avoid the tester from falling. Specifications: Material: ABS Operating Voltage: 60~600V AC (3 Phase) Limit Support Voltage: 2000V/minute (impulse voltage …

DIY multimeter kit comprising a digital multimeter, socket tester and voltage test pen Integral test leads in multimeter with LCD display Ergonomic design Socket tester ensures plug sockets are correctly wired and connected. Includes a button for testing the function of RCD's and RCBO's Voltage test pen has both visual and audible functions, offering a quick and clear voltage detection. LED illumincation Batteries provided

Can measure moisture level and the ambient temperature. LED indication Digital LCD display with backlight Range of wood: 6...60 % Range of building material: 0.2...2.9 % Environment temperature: 0...40°C (32...99°F) Weight: about 41 g (with batteries) Battery: 1.5 V, LR44 or equivalent, 4 pieces Environment temperature: 0...40°C (32...99°F)

Detection depth Stud mode: wood stud of 30×30 mm at depth of ≤ 14 mm Metal mode: iron pipe of Ø 20 mm at depth of ≤ 25 mm AC mode: 50 mm for 90...250 V at 50...60 Hz Power: 9 V battery (6F22), Weight: 213 g (with battery) 2 meter measure tape inside Whole alarm icon indicator Mark button to mark dots on the wall surface Always calibrate before each use

Ideal for electricians & test engineers. It will perform essential tests and measurements on most electronic items.

A simple and easy to use tester that confirms the presence of voltage on vehicle electrical systems including those using the very latest 48V subsystem’s as used by Audi on their newest luxury models and the soon to be launch 48V hybrid assist systems coming from Renault.

Features: Multiple Functions Digital Tester: it can measure DC/AC voltage, resistance, capacitance, frequency, continuity and diode, live wire detecting, phase sequence detection. Smart(Auto) Measurement: DC/AC voltage, resistance, continuity can be measured, and the meter can automatically identify the measurement signal. User-friendly Data Checking: 1.3-inch LCD display screen, signal intensity indicator bargraph, it also has data hold function for freezing the measured data for easily viewing. Low Power Consumption: powered by 2pcs AAA batteries, with 15 minutes auto power off function to save power. LED Illumination: built-in LED light for illuminating in the dark working spaces. Safety …

AC Voltage:0-600V DC Voltage:0-600V Capacity measurement: max. 4 mF Resistance Measurement: 40MΩ Frequency Measurement: 4mhz Battery measurement: 1.5/9V