Multimeters

Digital Multimeter / Current Strength / AC Voltage 200 mV - 600V / Direct Voltage (DC) 200 V - 600 V / Alternating Current (AC) 200 mA - 10 A / Direct Current (DC) 200 mA - 10 A

• Fully insulated probes have a spring loaded clamp with stainless steel pin that self centres and punctures the insulation.• Fitted with ø4mm banana style connectors and suitable for use with most multimeters and analysers.• Maximum Wire Size: ø3.5mm.• Suitable for automotive use only, with a maximum input of 50V DC.Fully insulated probes have a spring loaded clamp with stainless steel pin that self centres and punctures the insulation. Fitted with ø4mm banana style connectors and suitable for use with most multimeters and analysers. Suitable for automotive use only, with a maximum input of 50V DC.• Fully insulated probes have a spring loaded clamp. • Stainless steel pin self-cen…

• Connector set containing seven common sizes of male and female connectors and two earth lead connectors.• Provides a time-saving solution and accurate connections for testing a wide variety of electrical components and connectors.• Designed for use with a multimeter with banana type connectors.• For automotive use, not suitable for use on high voltages.Connector set containing seven common sizes of male and female connectors and two earth lead connectors. Provides a time-saving solution and accurate connections for testing a wide variety of electrical components and connectors. Designed for use with a multimeter with banana type connectors. For automotive use, not suitable for use on high …

• Kit provides an easy-to-use, universal method for diagnostic testing on automotive 12V actuator low tension switching circuits.• Bright clear LED lights give a clear indication of switching on low tension circuits and relays.• The 4mm female sockets allow the probes to be used on any multimeter with 4mm male leads.• Fine probe pins offer universal connectivity.Noid Test Light Kit is used to provide an easy-to-use, universal method for diagnostic testing on automotive 12V actuator low tension switching circuits. Bright clear LED lights give a clear indication of switching on low tension circuits and relays. The 4mm female sockets allow the probes to be used on any multimeter with 4mm male lea…

AC Voltage:0-600V
DC Voltage:0-600V
Capacity measurement: max. 4 mF
Resistance Measurement: 40MΩ
Frequency Measurement: 4mhz
Battery measurement: 1.5/9V

HT1E600; Multimeter; Hogert Technik

• Durable composite housing with rubber grip around handle for comfort and control.• Designed to verify the presence of AC and DC current and with non-contact voltage detection with flashlight and non-contact frequency measurement.• Perfect for the automotive electrician.• Features 18mm clamp, a backlit LCD display and an LED light at the front of the unit for use when working in dark areas.• Supplied with storage case.• Measures: - AC and DC Current- Frequency.Durable composite housing with rubber grip around handle for comfort and control. Designed to verify the presence of AC and DC current and with non-contact voltage detection with flashlight and non-contact frequency measurement. Perfect for…

• Five pairs of coloured cables.• Each cable has shrouded crocodile clips at each end.• Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.Five pairs of coloured cables. Each cable has shrouded crocodile clips at each end. Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.• Five pairs of coloured cables. • Each cable has shrouded crocodile clips at each end. • Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring. • Model No. VS222Technical Specification:Contents: Red, Black, Green, White, YellowNett Weight: 0.08kgDimensions: Length: 35mm x…

Spare inductive clamp for 200 and 300 range multi and clamp meters.1 x Inductive Clamp for 41821 and 41822 Digital Meters

DATA HOLD allows you to store the current reading on the display. Select - function selection. Temperature measurement from -40°C to 1000°C / -4ºF ~ 1832ºF with the included thermocouple helps detect faulty components of electrical installations
NCV allows non-contact detection of current in cables. allows the measurement of DC and AC voltages up to 2000 V, DC and AC currents up to 400 mA and resistors up to 400 MΩ, capacities up to 400 uF and frequencies up to 4 MHz. diode and continuity test as well as hFE, PNP, and NPN Tran. sistortest.
The device has a large LCD screen with blue backlight, so you can view and read results up to 4000 even in the dark. the rubber case protects against mecha…

• Crocodile clips small.• Colours: Black & Red.• Pack of 12 (6 Pairs).• Length: 55mm.• Maximum current 10 amps.Crocodile clips small. Maximum current 10 amps.• Crocodile clips small. • Colours: Black & Red. • Quantity: 12 (6 Pairs). • Length: 55mm. • Maximum current 10 amps. • Model No. CROCSMTechnical Specification:Nett Weight: 0.04kgOverall Length: 55mmPack Qty: 12 (6 Pairs)Dimensions: Length: 38mm x Height: 135mmWeight: 0.04KgWarranty: Consumable

• Crocodile clip assortment.• Quantity: 60.• Colours: Black & Red.• Contents (Approximate Quantity): Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8).• Supplied in partitioned box.Assortment box of 60 crocodile clips.• Crocodile clip assortment. • Quantity: 60. • Colours: Black & Red. • Contents (Approximate Quantity): Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8). • Supplied in partitioned box. • Model No. AB023CATechnical Specification:Contents: (Approximate Quantity) Non-Insulated; 55 (x20), 70 (x2), 75mm (x2), Insulated; 45 (x16), 55 (x12), 60mm (x8), Colours; Black & RedNett Weight: 0.34kgDimensions: Length: 151mm x Height…

• Set of 1.35m automotive test leads with ø4mm banana style connectors.• Used for testing and diagnosing faults in electronic circuits.• Suitable for use with most multimeters and analysers.Set of 1.35m automotive test leads with ø4mm banana style connectors. Used for testing and diagnosing faults in electronic circuits. Suitable for use with most multimeters and analysers.• Set of 1.35m automotive test leads with ø4mm banana style connectors. • Used for testing and diagnosing faults in electronic circuits. • Suitable for use with most multimeters and analysers. • Model No. TATLTechnical Specification:Nett Weight: 0.14kgDimensions: Length: 175mm x Height: 40mmWeight: 0.146KgWarrant…

Contact free voltage detector with LED/audible indication. Designed for quickly identifying wire and cable breaks as well as detecting voltage in fuses, cables, switches, outlets, lighting fixtures and many more. Features two selectable voltage settings, low voltage ranges from 80V and high voltage from 220V. Ideal for microwave applications and phase detection in sockets. Requires 2 x AAA batteries (not included).Model No:AK1998Display:Green LEDVoltage Range:80-1000VFrequency Range:50-60HzOvervoltage Category:CATIIIOperating Temperature:0°C to +40°C at RH

• One of a comprehensive range of Sealey Hand Tools, suitable for daily use.• VDE Approved mains voltage tester with screwdriver blade.• Fully insulated with moulded transparent plastic handle and blade sheath.VDE Approved mains voltage tester with screwdriver blade. Fully insulated with moulded transparent plastic handle and blade sheath.• VDE Approved mains voltage tester with screwdriver blade. • Fully insulated with moulded transparent plastic handle and blade sheath. • Model No. AK1991Technical Specification:Length: 190mmNett Weight: 0.03kgTesting Range: 100-250VDimensions: Length: 28mm x Height: 232mmWeight: 0.032KgWarranty: 1 year

150.1480; Multimeter; KS TOOLS