Multimeters

One year Fluke warranty These premium quality Test leads are for the full range of Fluke Digital Multimeters One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads Industry Standard 4mm fittings Recommended for µV measurements

IntelliTemp digital toning technology ends cable location confusion, decisively rejects noise and false Signals, locates Cables on Active networks, even when terminated at a switch MT-8200-60-KIT includes: IntelliTemp 200 LAN toner and 200 probe, Coax F connector adapter, (2) RJ11 and (2) RJ45 patch cables, test leads with alligator clips, (2) lanyards, quick Start Guide, and (2) 9-volt batteries IntelliTemp digital toning technology isolates cable and wiring within a bundle, despite cable bleed, confirms cable location, verifies continuity, and detects faults (opens, shorts, and reversed pairs) in one step Smart tone analogue toning technology isolates individual wire pairs precisely by …

MT-4618-C Sound Level Meter A & C weighting network selection Measuring range from 30 to 130 Db,LCD display with backlight High speed (FAST)/Low speed (SLOW) response rate selection Max./Min.value、Data Hold、Auto range、Backlight、Good anti-interference performance、Auto power off

3 1/2 2A Mini DigitalClampMeter AC current 2A. Temperature measurement 3 1/2 digits 1999 counts, 0.8% best accuracy. Auto range., Portable and simple one-hand operation. Maximum value hold, data hold, auto power off, low battery indication.Max. jaw opening: max. 30mm

Pocket Smart Multimeter, Card type large screen True RMS measurement, Dual value display screen, Non-contact electrometry Dual value display screen Non-contact electrometry

◆◆ Display 6600 counts ◆◆ Auto Ranging ◆◆ Auto Power Off ◆◆ Relative Measurement ◆◆ Non-Contact Voltage Detector ◆◆ Diode Open Voltage 3.2V ◆◆ Continuity Buzzer

● Dual Display 22000 counts and 44 Segments Bars Graph ● Auto & Manual Ranging ● Auto Power Off ● True RMS for AC Voltage & AC Current ● Low pass filter (1kHz) for AC Voltage & AC Current ● Relative Measurement ● Peak Measurement ● Diode 2.8V ● Continuity Buzzer

◆◆ Dual Display 22000 counts and 44 Segments Bars Graph ◆◆ Auto & Manual Ranging ◆◆ Auto Power Off ◆◆ True RMS for AC Voltage & AC Current ◆◆ Low pass filter (1kHz) for AC Voltage & AC Current ◆◆ Relative Measurement ◆◆ Peak Measurement ◆◆ Diode 2.8V ◆◆ Continuity Buzzer

● Display 8 digits (22000 counts), about 10mm high red LED display with decimal point ● Power Requirement AC 198~264V 50/60Hz / AC 90~132V 50/60Hz ● Low Pass Filter ~100kHz, -3dB~150kHz, -3dB at ATTN condition ● Data Hold ● Self Check ● Overrange Indications ● OSC. Out 10MHz

● Display 2000 counts ● Zero Adjustment approx. ± 20pF ● Input Jacks ● High Accuracy in Measuring: 0.1pF ● Low Battery Display

* Indicate phase orientation (Clockwise or anticlockwise) * Fast and accurate measurement * With simultaneous indications via LEDS * Portable and compact design * Max Operation Voltage: 400V AC for all ranges * Normal Test Voltage: 1 ~ 400V AC

* Indicate phase orientation (Clockwise or anticlockwise) * Fast and accurate measurement * With simultaneous indications via LEDS * Portable and compact design * Max Operation Voltage: 400V AC for all ranges * Normal Test Voltage: 1 ~ 400V AC

◆◆ Jaw Opening Ф55mm/2.2" ◆◆ True Root Mean Square ◆◆ DCA Zero adjust ◆◆ Frequency DC/AC 50~60Hz

● Display 6000 counts ● Jaw Opening Ф12mm/0.5" ● Auto & Manual Ranging ● Auto Power Off ● Non-Contact Voltage Detector ● Diode Open Voltage 3.2V ● Continuity Buzzer

◆◆ Display 2000 counts ◆◆ Jaw Opening Ф28mm/1.1" ◆◆ Diode Open Voltage 4.5V ◆◆ Continuity Buzzer

Zippered carrying case with durable vinyl exterior Has belt loop and an inner pocket to store test leads or small accessories Ideal companion case to: Fluke 61 & 65 Infrared Thermometers Fluke 320 series Clamp Meters 1 year warranty

Auto and Manual Ranging with Relative measurement (all ranges except frequency) Auto power off (could be disabled) & Blue LED Back-lit LCD display AC/DC 1000V/10A 200KHz 200uF 40Mohm Relative Measurement hFE Diode Check Continuity LED / Sound Warning when incorrect banana jacks are used relative to function switch setting All range fused (resettable) with 1 Year Warranty

Continuous and alternating voltmeter: 0.4V to 600V Continuous and alternating ammeter: 0.4A to 10A Ohms: 400O to 40MHK Low battery indicator Automatic shutdown protection 600V Wide screen Automatic selection of gauges Maximum and min recording Diode test function or continuous ringtone Replacement test wires (Ref KT 9DM1371P01)

A set of measuring pens. The test pins are used to connect to the multimeter. Test pins are red and black, placed in a box Colour: red, black / cable length: 95 cm / maximum load: 10 A, 1 kV, CAT III/possibility of changing the tips: yes

High measuring accuracy Measurements are possible even under a strong magnetic field Input overload protection is provided