A-Data ADATA LEGEND 970 1 TB M.2 PCI Express 5.0 NVMe 3D NAND SLEG-970-1000GCI
 |
 |
Close
Buy A-Data ADATA LEGEND 970 1 TB M.2 PCI Express 5.0 NVMe 3D NAND SLEG-970-1000GCI
When you make a purchase through links on our site, we may earn an affiliate commission.
ADATA LEGEND 970 1 TB M.2 PCI Express 5.0 NVMe 3D NAND SLEG-970-1000GCI | £91.87 |  | |||
Extraordinary Speed
The LEGEND 970 adopts the latest generation PCIe Gen5 x4 transmission interface and complies with the NVMe 2.0 standard to deliver amazing read and write capabilities. The LEGEND 970 also supports the latest Intel and AMD platforms. Whether in dynamic or static output it always provides full performance.
Unreal Performance
Complete every task in moments. The LEGEND 970 has a sequential read/write speed of 10000/10000MB per second double the speed of PCIe Gen4 SSDs and 6 times faster than Gen3 SSDs and is fully backward compatible with PCIe 4.0 and 3.0 platforms.
Experts of Patented Heat Dissipation
When high efficiency is required leave it to the professionals! The LEGEND 970 adopts dual-layer extruded aluminum fins to create a dense air duct to divert hot and cold air. When heat is conducted upward a built-in micro fan is used to remove thermal energy. This unique "active heat dissipation" design delivers significantly cooler temperatures than a fanless heatsink by 10%.
1The heatsink of this product is pre-installed. Please consider installation space before adopting this product and confirm whether your motherboard is supplied with an M.2 heatsink (refer to manufacturer board manual). If so please remove it first and then install this product with its supplied heatsink.
2This product comes with a fan attached to the SATA cable which requires an additional power supply connection to activate the active cooling effect.
3Heat dissipation data is based on test conditions of an internal laboratory and actual figures may vary due to personal hardware software and test environments.
Surface Crystallization Improve Heat Dissipation
The LEGEND 970's aluminum alloy fins are treated with surface crystallization which utilizes its physical properties to increase the overall air contact area and maximize the effectiveness of its air cooling system.
QuiKTIPS : Never Experience Throttling Again
High-speed PCIe 5.0 transmission requires powerful heat dissipation. If heat is not dissipated quickly data read/writes speeds will be adversely affected and the drive itself crashing is a possibility. The LEGEND 970's active heat dissipation mechanism withstands high temperature test and can maintain stable performance even during long bouts of high speed operation.
*Heat dissipation data is based on test conditions of an internal laboratory and actual figures may vary due to personal hardware software and test environments.
QuiKTIPS : Active Cooling Analysis
How does active cooling work? Active cooling works by using a tightly adhered heat dissipation pad and a metal heat dissipator to transfer heat from the SSD. The double-layered aluminum fins help facilitate the heat transfer process. Additionally a built-in fan draws cold air from openings on the nameplate and directs it towards the aluminum fins. The hot and cold air meet and the rotation of the fan quickly expels the heat from both sides of the aluminum fins.
The LEGEND 970 adopts the latest generation PCIe Gen5 x4 transmission interface and complies with the NVMe 2.0 standard to deliver amazing read and write capabilities. The LEGEND 970 also supports the latest Intel and AMD platforms. Whether in dynamic or static output it always provides full performance.
Unreal Performance
Complete every task in moments. The LEGEND 970 has a sequential read/write speed of 10000/10000MB per second double the speed of PCIe Gen4 SSDs and 6 times faster than Gen3 SSDs and is fully backward compatible with PCIe 4.0 and 3.0 platforms.
Experts of Patented Heat Dissipation
When high efficiency is required leave it to the professionals! The LEGEND 970 adopts dual-layer extruded aluminum fins to create a dense air duct to divert hot and cold air. When heat is conducted upward a built-in micro fan is used to remove thermal energy. This unique "active heat dissipation" design delivers significantly cooler temperatures than a fanless heatsink by 10%.
1The heatsink of this product is pre-installed. Please consider installation space before adopting this product and confirm whether your motherboard is supplied with an M.2 heatsink (refer to manufacturer board manual). If so please remove it first and then install this product with its supplied heatsink.
2This product comes with a fan attached to the SATA cable which requires an additional power supply connection to activate the active cooling effect.
3Heat dissipation data is based on test conditions of an internal laboratory and actual figures may vary due to personal hardware software and test environments.
Surface Crystallization Improve Heat Dissipation
The LEGEND 970's aluminum alloy fins are treated with surface crystallization which utilizes its physical properties to increase the overall air contact area and maximize the effectiveness of its air cooling system.
QuiKTIPS : Never Experience Throttling Again
High-speed PCIe 5.0 transmission requires powerful heat dissipation. If heat is not dissipated quickly data read/writes speeds will be adversely affected and the drive itself crashing is a possibility. The LEGEND 970's active heat dissipation mechanism withstands high temperature test and can maintain stable performance even during long bouts of high speed operation.
*Heat dissipation data is based on test conditions of an internal laboratory and actual figures may vary due to personal hardware software and test environments.
QuiKTIPS : Active Cooling Analysis
How does active cooling work? Active cooling works by using a tightly adhered heat dissipation pad and a metal heat dissipator to transfer heat from the SSD. The double-layered aluminum fins help facilitate the heat transfer process. Additionally a built-in fan draws cold air from openings on the nameplate and directs it towards the aluminum fins. The hot and cold air meet and the rotation of the fan quickly expels the heat from both sides of the aluminum fins.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
The best internal SSDs with high read and write speedsFive M.2 SSD drives with support for PCI-E 4.0 and maximum read speeds of up to 7450 MB/s
TLC, QLC, MLC, SLC: which type of drive memory is better?Important differences between the types of NAND memory TLC, QLC, MLC, SLC, which determine the scope of their use and development prospects
How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
We recommend
240 GB, M.2, 22x80, PCI-E 3.0 4x, 3D TLC NAND, 1200 MB/s, IOPS 179 K, 1950 MB/s, IOPS 102 K
