Makita DGA452Z
Cutting Discs318
 |
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotto
 |
The X-LOCK Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain. Its turbo rim is designed to achieve neat results in all kinds of hard ceramics, while the op more→timised diamond matrix delivers chip-free cuts. Use this disc for cutting ceramic, porcelain and fine stoneware. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. • Extra-Clean Cuts in Porcelain • X-LOCK Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain • Turbo rim for neat results in all kinds of hard ceramics • Optimised diamond matrix delivers …
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotto
 |
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. More durable than normal sanding discs. Abrasive flaps are attached to rigid disc with more→epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • More durable than normal sanding discs. • Abrasive flaps attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø115/22mm. • Model No. FD11580 Specifications: Model No FD11…
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.• Pack of 50.General-purp
Wire & Cup Brushes195
 |
Price from £3.49
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 25mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 26mm Shaft.• Trim Length/ø: 28/25mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 26mm Shaft.• Flat trimmed brush with brassed and crimped filaments. • ø6 x 26mm Shaft. • Trim Length/ø: 28/25mm. • Model No. VS1803Technical Specification:N
 |
Price from £31.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank 454278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank WBSI12
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £6.95 up to £7.69
Compare prices4→Compare prices and buy Sealey Wire Brush Set 8pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm (x1), ø more→75mm (x1), Removable Shafts (x3).• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm(x1), ø75mm (x1), Removable Shafts (x3).• Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: ø6mm. • Contents: Brushes; Flat Wire …
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 75mm 6mm Shank STA36040
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 75mm • Pack Quantity: 1
 |
Price from £6.49
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (3 Piece)
• Set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces • Harde more→ned dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. …
 |
Price from £15.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 50mm 6mm Shank LES435162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 100mm 6mm Shank STA36010
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 100mm • Wheel Thickness: 12mm • Shank Diameter: 6m
Power Tool Batteries & Chargers13
 |
99.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
The Makita DC18RD Twin Port Charger is able to charge two Makita slide style Li-ion and Ni-MH batteries (with adapter) at the same time, this is as fast as the DC18RC charges one battery. The DC18RD h more→as full charge sound alert, an LED charging display, and electronic current limiter which provides overload protection. The Twin Port charge times are 2 x 18 Volt 3.0ah Batteries 22 mins, 2 x 18 Volt 4.0ah Batteries 36 mins, and 2 x 18 Volt 5.0ah Batteries 45 mins.
 |
Price from £36.99 up to £65.40
Compare prices5→Compare prices and buy Makita Fast Battery Charger DC18RC Li-ion 14.4V - 18V 195584-2
Makita fast battery charger charges Makita batteries from 14.4V to 18V in as little as 22 minutes The DC18RC is a compact-sized fast charger which takes only 22 minutes to fully charge a 3.0Ah Li-ion more→battery. The innovative computer-contro
- The DC18RC has a cooling fan and Active 3 Controls
- This means that during the loading of the charging voltage, charging current, and temperature is held in the holes
- The cooling system blows cool air into the battery
- As a result,
- The DC18RC has a cooling fan and Active 3 Controls
- This means that during the loading of the charging voltage, charging current, and temperature is held in the holes
- The cooling system blows cool air into the battery
- As a result,
 |
99.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Makita Fast Battery Charger DC18RC LXT Lithium Ion 18V + Makita BL1840B (1967265-4) 18 Volt 4.0Ah LXT Lithium-Ion Battery This eXclusive Toolstop Deal consists of the DC18RC Charger and 1 x 4.0Ah Batt more→ery. Model DC18RC is a compact size fast charger which charges Makita batteries from 14.4V to 18V. Only 36 minutes to fully charge a BL1840B 4.0Ah Li-ion battery. The innovative computer controlled charging system provides optimum charge to each battery through the digital communication between charger and battery. The internal cooling fan keeps the battery temperature low for minimum charging time. DC18RC Features: The DC18RC has a cooling fan and Active 3 Controls This means that during the loading …
 |
83.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
DC18RD is a two port fast charger that is able to charge two Makita slide style Li-ion and Ni-MH batteries (with adapter) at the same time, as fast as DC18RC charges one battery. The DC18RD can also b more→e used for charging USB device from the USB port on front of unit. Full charge sound alert. LED charging display. Two charging ports. Forced cooling system Electronic current limiter for overload protection.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
