Makita DGA506Z
Cutting Discs192
 |
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
 |
The CorePlus General-Purpose Diamond Blade utilises hybrid turbo technology (HTT), interspersed turbo segments provide the optimum balance between long life and fluid speed. It has a precision-engin
 |
The Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety. The disc is composed of high-quality silicon carbide and resin specifically designed for work on s more→tone with impressive results. The disc's precision-manuf
 |
The Multi Construction Rapido Cutting Disc provides powerful and fast cutting performance across various materials. Its special abrasive mix enables work on various materials. In addition, the thin di more→sc offers easy and fast cutting with little force exertion, less noise and minimum dust. Use this disc for cutting metal, Inox, non-ferrous metals, stone, marble and plastic. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders.Straig
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→& Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
Best For Marble Diamond Cutting Disc Provides Clean Cuts In All Sorts Of Marble And Plastic Material.Featur
 |
The Makita X Lock A36P Metal Grinding Disc are compatible with conventional angle grinders. The X-LOCK accessories are firmly attached and cannot be mounted incorrectly. The X-LOCK mechanism ensures t more→hat the accessory is properly mounted to the tool without a nut, flange or spanner. Specifications • Grit: A36P • Bore: 22.23mm • Diameter: 125mm • Pack Quantity: 1
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.General-p
Wire & Cup Brushes195
 |
Price from £7.49
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 50mm 6mm Shank LES43012307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £8.95
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
The Pencil Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it ideal for cleaning work more→in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results It is intended for use with drills with a 6-mm shank.Pencil brush – knotted wireIdeal for wo…
 |
Price from £5.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Brass Wire Brush 50mm 6mm Shank 2608622008
The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
Price from £3.22 up to £5.32
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £5.58 up to £5.95
Compare prices3→Compare prices and buy Sealey Decarbonising Brush Set 2pc
• Brassed and crimped steel brushes with flat and pointed fill. Suitable for decarbonising cylinder head ports and components.• Shank ø: 6mm.Brassed and crimped steel brushes with flat and pointe more→d fill. Suitable for decarbonising cylinder head ports and components.• Brassed and crimped steel brushes with flat and pointed fill. • Suitable for decarbonising cylinder head ports and components. • Shank Diameter: ø6mm. • Model No. VS1801Technical Specification:N
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £5.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBSI50
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup more→Maximum speed: 12,000/min.The FAIWBSI50 Wire Brsh has the following specifications: Face diameter: 50 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £3.27 up to £5.36
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 50mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
Power Tool Batteries & Chargers12
 |
99.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Makita Fast Battery Charger DC18RC LXT Lithium Ion 18V + Makita BL1840B (1967265-4) 18 Volt 4.0Ah LXT Lithium-Ion Battery This eXclusive Toolstop Deal consists of the DC18RC Charger and 1 x 4.0Ah Batt more→ery. Model DC18RC is a compact size fast charger which charges Makita batteries from 14.4V to 18V. Only 36 minutes to fully charge a BL1840B 4.0Ah Li-ion battery. The innovative computer controlled charging system provides optimum charge to each battery through the digital communication between charger and battery. The internal cooling fan keeps the battery temperature low for minimum charging time. DC18RC Features: The DC18RC has a cooling fan and Active 3 Controls This means that during the loading …
 |
13.00Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Charger / For Battery Technology Li-Ion / Number of Batteries 1
 |
83.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
DC18RD is a two port fast charger that is able to charge two Makita slide style Li-ion and Ni-MH batteries (with adapter) at the same time, as fast as DC18RC charges one battery. The DC18RD can also b more→e used for charging USB device from the USB port on front of unit. Full charge sound alert. LED charging display. Two charging ports. Forced cooling system Electronic current limiter for overload protection.
 |
99.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
The Makita DC18RD Twin Port Charger is able to charge two Makita slide style Li-ion and Ni-MH batteries (with adapter) at the same time, this is as fast as the DC18RC charges one battery. The DC18RD h more→as full charge sound alert, an LED charging display, and electronic current limiter which provides overload protection. The Twin Port charge times are 2 x 18 Volt 3.0ah Batteries 22 mins, 2 x 18 Volt 4.0ah Batteries 36 mins, and 2 x 18 Volt 5.0ah Batteries 45 mins.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
