Makita DGA513ZJ
Cutting Discs225
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Variable Cutting Depths-Adjustme
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
 |
Lasts up to 100x longer than a bonded cutting disc - Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical sme more→ll of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no c…
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
• Aluminium oxide, depressed centre discs for electric and air tools.• Suitable for metal grinding applications.Al
 |
The Marcrist VC750 Rip Cut Diamond Blade is engineered for superior performance in cutting a variety of materials. this diamond blade excels in rip cutting through pallets, roofing felt, tree roots an more→d wood with exceptional speed and precision. Featuring a high-quality diamond matrix, the VC750 offers enhanced durability and long-lasting cutting power, ensuring reliable results on tough materials. Its advanced design minimises wear and tear, extending the blade’s lifespan and maintaining consistent performance throughout its use. Features & Benefits • Ideal for roofers and landscapers • Silent centre provides a quieter more stable cut • Ultra stable and reliable • Carbide cl…
 |
The Turbo Viper – Tva Diamond Blade Is Recommended For Dry Cutting Of Hard Materials Such Asgranite, Rustic Tiles, Klinker, Refractories, Slate And, Of Course, Porcelain Tiles. The Specific Design Of more→The Diamond Rim Of The Tva Diamond Blade By Rubi Offers Faster Cutting Speed In The Hardest Materials Without Sacrificing The Quality Of The Finish.Features
Wire & Cup Brushes318
 |
Price from £8.95 up to £14.99
Compare prices4→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
 |
Price from £19.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 100mm M14 Thread LES471257
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max R.P.M. 12,500Additiona
 |
Price from £31.00 up to £37.46
Compare prices3→Compare prices and buy Sealey Cleaning Brush Set Injector Bore 14pc
• Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.• Set includes 3-Piece Brass Brushes 18/20/25mm.• 2-Piece End Brushes 15/19mm.• 1-Piece more→Steel Rod.• 1-Piece Rod.• 6-piece blanking plugs.Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes 3-piece brass brushes 18/20/25mm, 2-piece end brushes 15/19mm, 1-piece Steel rod, 1-piece rod and 6-piece blanking plugs.Technical Specification:B
 |
Price from £5.61 up to £6.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (3 Piece)
• Set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces • Harde more→ned dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. …
 |
Price from £20.99 up to £28.95
Compare prices6→Compare prices and buy Bosch 0.5mm Knotted Steel Wire Cup Brush 90mm M14 Thread 1608614001
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £6.49 up to £6.59
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 50mm 6mm Shank LES43012307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £20.95 up to £24.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock Ss FAIWBT75SSXL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish. Use on stainless steel, aluminium and non-ferrous metal surfaces. Using standard wire brushes on s more→tainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Wire Type: High Tensile Twisted Stainless Steel (304)Diameter: 75mmFitting: X-LOCKWire Size: 0.5mmMax. RPM: 12500 Features: Use on stainless steel, aluminium and non-ferrous metal X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools …
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
Power Tool Batteries & Chargers13
 |
Price from £36.95 up to £94.95
Compare prices5→Compare prices and buy Makita DC18SE 18v / 12v / 10.8v Battery Car Charger 12v
The Makita DC18SE is a power tool battery charger which is powered via the 12v socket in a vehicle, enabling you to charge your batteries while travelling between jobs. It can be used for Makita's 14. more→4v - 18v lithium ion batteries. The DC18SE Will charge 18v and 14.4v LXT slide batteries in the below times: • 3.0Ah: 60 minutes • 4.0Ah: 90 minutes • 5.0Ah: 110 minutes • 6.0Ah: 130 minutes Features & Benefits • Charges Makita power tool batteries via the 12v socket in a vehicle • Compatible with Makita Li-ion batteries between 14.4v and 18v (LXT) • Active current control • Active thermal control • Active voltage control Specifcations • Battery …
 |
Price from £99.95
Compare prices4→Compare prices and buy Makita DC18RD Li-ion 18v Dual Port Cordless Battery Charger 110v DC18RD/1
The DC18RD is a two port fast charger capable of charging two Makita slide style Lithium Ion Batteries (or Ni-MH batteries in conjunction with an adapter) at the same time. Both batteries will be char more→ged fully in the same amount of the time as the DC18RC fast charger takes to charge a single battery. The DC18RD is also equipped with a USB port for charging USB devices. Specifications: Charge Times: • 2 x 18v 3.0ah Batteries: 22 mins • 2 x 18v 4.0ah Batteries: 36 mins • 2 x 18v 5.0ah Batteries: 45 mins • Battery voltage range: 14.4v - 18v • Battery type: Li-Ion (or Ni-MH in conjunction with an adapter) • Voltage: 110v
 |
Price from £194.95
Compare prices4→Compare prices and buy Makita DC18RD 18v Twin Charger and 2 Li-ion Batteries 3ah MAKKIT13
Lightweight and shock-absorbing
 |
59.98Buy!
£
£
MachineMart.co.uk
Delivery: to United Kingdom
Report
The Makita DC18RC Battery Charger benefits from Intelligent Charging Technology to control current, voltage and temperature to maximize the battery life. Charges BL1830 18v 3.0Ah batteries in approxim more→ately 22 minutes.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
