Model Building Kits Dremel

Saw blade for cutting soft sheet metal. This blade has 10 teeth per centimeter ensuring excellent cuts.

Saw blade for detailed cuts in wooden materials. This blade has 7 teeth per centimeter ensuring the finest cutting results.

Dremel Moto-Saw MS20 General Purpose Wood Blade X 5 Saw blade for straight and large-diameter curved cuts in wooden and plastic materials. This blade has 6 teeth per centimeter ensuring a good balanc more→e between speed and precision.

This saw blade is ideal for longer cut offs, which are normally limited by the throat depth of the tool. This blade has twisted top and bottom parts at 90 degrees, this twist allows a lateral material more→feed either from left or right, resulting in technically infinite cuts.

Transforms your Dremel tool into a precision circular saw for fine, straight cuts on all sorts of wood and plastic. Is easier to use than a handsaw, more precise than a jigsaw and fits in tighter spac more→es than a circular saw.

Replacement Dremel SpeedClic fibreglass reinforced metal cutting wheelsWorking diameter 25mmShank diameter 3.2mmDremel, the inventor of the Multitool, now brings you SpeedClic - an innovation that mak more→es changing cut-off wheels quick and easy.Through a patented mandrel and wheel design, Dremel has found a way that enables you to change your accessory in 3 simple steps - Pull, Click, Twist - without using any tools.Pack Contains5 x cutting wheels

The Detail Abrasive Brushes have very flexible bristles which allow removal of the exterior “surface layer” without damaging the base layer below. This can be used for deburring, cleaning, finishing, more→and polising of detailed parts, tiny areas and irregular places. Technical Specifications: Shank Diameter: 3.2mmWorking Diameter: 25mmGrit: 36Maximum RPM: 15000 /min 

For precise and delicate material removal on metal, glass, wood and plastic. The flexible material enables to work on tight and irregularly shaped areas. Can also be used with EZ SpeedClic mandrel 402 more→(sold seperately). EZ SpeedClic. Quick, Easy, Keyless.

The EZ SpeedClic Sanding Discs are great for light sanding and shaping.The discs are available in 60 and 240 grit with a diameter of 30mm and are compatible with the SC402 mandrel. Change discs withou more→t using a wrench!The EZ SpeedClic sanding discs last 2x longer and remove 2x more material than the Dremel 411 and 413 sanding discs.Quick, Easy, Keyless. Technical Specifications:Shank diameter: 3.2mmWorking diameter: 30mmGrit: 60 

Dremel Diamond cutting wheel 38mm Diameter EZ SpeedClic Fitment Suited for cutting hard materials, for example concrete, stone, porcelain, ceramic and hard epoxies

Cut faster through wood. With this ø 38 mm EZ SpeedClic wood cutting wheel 544 you can cut both hard and soft types of wood and also laminate. The carbide coating makes this wheel very durable. Quick, more→Easy, Keyless.Technical Specifications:Shank diameter:  Requires the EZ SpeedClic Mandrel SC402 (Sold Seperately)Shank diameter3,2 mmWorking diameter38,0 mmMax working depth14,0 mmMaximum RPM35.000 1/min

The Dremel SC541 Grinding Wheel is ideal for grinding and deburring different types of metal. Because of the glass fibre reinforced 38mm diameter wheel you can grind faster and more efficiently. The E more→Z SpeedClic system enables quick, easy and keyless accessory change.Technical Specifications:Shank Diameter: 3.2mmWorking Diameter: 38mm

These cutting wheels are specially designed for cutting in all sorts of plastics.Quick, Easy, Keyless.

Extra thin cutting wheels. 0.75mm thickness 38mm diameter.Pack of 5.Requires SC402 SpeedClic Mandrel (sold seperately)

The EZ SpeedClic sanding mandrel & sanding bands are ideal for quick material removal.The quick change EZ SpeedClic mandrel enables fast sanding band change.Pull, Place, Push.Compatible with Dremel 40 more→8 & 432 sanding bands. Technical Specifications:Shank diameter: 3.2mmWorking diameter: 13mmAccessory length: 36mmGrit: 60/120

The EZ SpeedClic Sanding Discs are great for light sanding and shaping. The discs are available in 60 and 240 grit with a diameter of 30mm and are compatible with the SC402 mandrel. Change discs witho more→ut using a wrench! The EZ SpeedClic sanding discs last 2x longer and remove 2x more material than the Dremel 411 and 413 sanding discs. Quick, Easy, Keyless. For use with all EZ SpeedClic accessories. 3.2mm Shaft.

Dremel Pack of 6 Sanding Bands 13mm 120 Grit What can you do with it? Sanding bands will generally remove finish and material (wood or other soft material). These bands are also used for (rough) sha more→ping and smoothing or rust removal from metal.   How to use? Change 13mm sanding bands 5X faster with the EZ SpeedClic Sanding Drum Mandrel (SC407) than a standard mandrel. Mandrel not included. The Dremel exclusive Easy Speedclic (SC) mechanism, makes wheel changing keyless, easy and fast: PULL - TWIST – RELEASE. The physical appearance of the band indicates what grit it is, the larger the bumps the lower the grit. The lower the grit, the more material is removed.   Use the sides of the band…

Dremel Pack of 6 Sanding Bands 13mm 60 Grit What can you do with it? Sanding bands will generally remove finish and material (wood or other soft material). These bands are also used for (rough) shap more→ing and smoothing or rust removal from metal.   How to use? Change 13mm sanding bands 5X faster with the EZ SpeedClic Sanding Drum Mandrel (SC407) than a standard mandrel. Mandrel not included. The Dremel exclusive Easy Speedclic (SC) mechanism, makes wheel changing keyless, easy and fast: PULL - TWIST – RELEASE. The physical appearance of the band indicates what grit it is, the larger the bumps the lower the grit. The lower the grit, the more material is removed.   Use the sides of the band…

Dremel 7mm Multipurpose High Temp Glue Sticks (12 pieces) To be used on Dremel model 910 (165°). Glues a variety of materials, such as wood, plastics, ceramics, textile, etc.

These multi-purpose glue sticks are designed specifically for use with the Dremel 940 glue gun, providing reliable bonding across a wide range of materials. Operating at temperatures between 165-195°C more→, they offer professional-grade adhesion for trade and workshop applications. The glue sticks are suitable for bonding wood, plastics, ceramics, carton, and textile materials, making them ideal for contractors, joiners, and general maintenance work. Their versatile formulation ensures strong bonds across different substrates, whether you're working on site or in the workshop. Each stick measures 100mm in length with an 11mm diameter, ensuring compatibility with the Dremel 940 glue gun system. Supplied i…

The EZ SpeedClic Sanding Discs are great for light sanding and shaping.The discs are available in 60 and 240 grit with a diameter of 30mm and are compatible with the SC402 mandrel.Change discs without more→using a wrench!The EZ SpeedClic sanding discs last 2x longer and remove 2x more material than the Dremel 411 and 413 sanding discs.Quick, Easy, Keyless. Technical Specifications:Shank diameter: 3.2mmWorking diameter: 30mmGrit:  240 

The Detail Abrasive Brushes have very flexible bristles which allow removal of the exterior “surface layer” without damaging the base layer below.This can be used for deburring, cleaning, finishing, a more→nd polising of detailed parts, tiny areas and irregular places.Use with EZ SpeedClic mandrel 402 (Sold seperately) Technical Specifications: Shank diameter: 3.2mmWorking diameter: 25.4 mmGrit: 220Maximum RPM: 15000 min

Dremel SpeedClic starter kit, comes with 1 mandrel and 2 cutting discs made of a hard abrasive with a diameter of 38 mm and a thickness of 1.6 mm.USESThe Dremel SpeedClic makes accessory changes easy more→as PULL - TWIST - RELEASE. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. Ideal for cutting, grooving and trimming all kinds of materials—including metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more.TIPSSecure objects to a stable surface while working.Hold the tool so that the wheel is at a perpendicular angle to the material being cut.Keep a light touch, a…

Dremel Diamond Engraving Tip Diamond Engraving Point. For usage with the Dremel Engraver MT290. The Diamond Engraving Point MT9929 has a longer lifespan and is for use on harder materials such as glass.