Model Building Kits PROXXON

Proxxon Tungsten Vanadium Milling bits - No 28720Selected tungsten vanadium steel. Purpose made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concent more→ricity ensure best life expectancy. All shafts 2.35 or 3.0mm. For use on hard and soft woods, NF and precious metals, as well as plastics and plaster of paris. Ideal for milling, routing, shaping, profiling and slotting.Proxxon No 28720 size 5.0mm pack of 3

Proxxon Tungsten Vanadium Milling bits - No 28710Selected tungsten vanadium steel. Purpose made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concent more→ricity ensure best life expectancy. All shafts 2.35 or 3.0mm. For use on hard and soft woods, NF and precious metals, as well as plastics and plaster of paris. Ideal for milling, routing, shaping, profiling and slotting.Proxxon No 28710 size 3.1mm, 2.3mm, 2.3mm, 2.3mm, 2.3mm pack of 5

HSS cutting blade for OZI/EOscillates, making it ideal for cutting metal, wood, PC cards, plastics, plaster of Paris and many other materials. The segment cut facilitates exact cutting right into corn more→ers. Ø 65mm, 160 teeth.

Replacement Cutting Wire for Proxxon Thermocut To be used together with the 12 / E thermal cutting tool to model free-form polystyrene, avoiding crumbling and imperfections that would occur with norm more→al cutting tools but also for the construction of architectural models, prototypes, for sidecutter and decorators and naturally for classic modeling. The wire, more resistant than that of the THERMOCUT 230 / E, can be shaped as desired.   Pack of 10

Solid carbide saw blade50mm diameter (10mm bore). 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other 'difficult' materials

Proxxon Sanding Discs with Arbor 2898218mm diameter self adhesive sanding discs which mount on to a rubber faced arbor.Arbor plus 5 x 120 grit and 5 x 150 grit discs.3mm shaft diameter.Proxxon Sanding more→Discs 2898318mm Diameter self adhesive sanding discs.Pack contains - 10 x 120 grit & 10 x 150 grit.No arbor included in set 28983

Proxxon Sanding Belts for BSL 220/E Belt SanderReplacement Proxxon Sanding Belts On tough woven backing for BSL 220/E.10mm x 330 mm.For metal, non-ferrous metals, wood and plastic, available in 80, 12 more→0 or 180 grit, supplied in packs of 5.For grinding & deburring of glass & ceramics the silicon carbide abrasive belt 180 grit also supplied in a pack of 5.These Proxxon belts are also suitable for grinding brass, steel & cast iron.

Grinding bands made from high-quality corundum (aluminium oxide)Mounted on a high-performance support. For the grinding of metal, non-ferrous metals, wood and plastics. 40 x 260mm.

Proxxon FBS 12/E Precision Drill/ Grinder 12VA great precision tool for delicate or small jobs which you can't do with a standard drill: Includes keyless chuck (capacity 0.3 - 3.2 mm).For use wit more→h MICROMOT transformers (Ref. 28707 or Ref. 28704).For precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiselling and cutting.Includes keyless chuck (capacity 0.3 - 3.2mm). A precision ball bearing minimises spindle side play. Spindle lock button for bit changing obviates the need for spanners. Recessed spindle head for inserting MICROMOT steel collets.Special, balanced, low noise DC motor with high life expectancy. Variable speed control with feedback effect (high …

"Super-Cut" scroll saw blades without pins. 130mm. Hard materials such as steel and PERTINAX. Fine-toothed blades (No. 3: 41 teeth per 25mm) NO 28 113 130 x 0.75 x 0.36mm 12 pieces

Tungsten milling cuttersWith two flute cutters and fishtail profile (cutting to the centre). Enables lowering into non-bored work pieces. For grey-cast iron, hardened cast iron, steel, cast steel, bra more→ss, aluminium, glass, plastic and carbon fibre. One piece each 1 - 2 and 3mm. Shaft diameter 3mm.

Proxxon Micro Cutter MIC Key FeaturesCuts most materials up to 4mm very easilyPowerful DC motor gives a high cutting perfromanceSlim, light and fits into the hand for great controlEasily makes cut-out more→s and curvesMakes modelling complex shapes much easierPower: 30W (230V) DescriptionThis extremely handy tool will effortlessly and cleanly cut most materials (not metals) up to 4mm thick. The powerful DC motor in this compact tool ensures a very high cutting performance. At just 36mm in diameter making the ergonomically shaped casing easy to hold and is easy to guide accurately. The blade is protected by a fold up guard and the design allows you to make cut-outs very easily. If you use wood, pla…

Extra narrow bandsaw blade (3.5mm) for tight radiiOf special tempered steel, with induction-hardened coarse teeth (14 TPI). Especially suited for aluminium and plastics

Proxxon End Wire Brush - Steel 8mm Wire brushes 8 and 13mm in a choice of steel, stainless steel or brass; two per pack. 2.35mm (3/32") shaft diameter.

Proxxon Diamond Twist DrillsWith natural diamond dust for drilling precious stones (pearls, coral, turquoise).Shafts 2.35 mm.Pack of 2 comprising 1 x 0.8mm and 1 x 1.2mm.

Proxxon Diamond Cutters & Grinders These bits have a consistent coating of diamond particles. The 2.35mm (3/32") diameter shafts are made from stainless steel. Used for engraving, fine detail work o more→r grinding on ceramics, glass, hardened steel, semi-precious stones, porcelain and plastics. The ball point bits are supplied in packs of 2, in 1mm and 1.8mm diameter.

"Super-Cut" scroll saw blades without pins. 130mm. Hard materials such as steel and PERTINAX. Fine-toothed blades (No. 3: 41 teeth per 25mm) NO 28 113 130 x 0.75 x 0.36mm 12 pieces

Corundum bound cutting disc for LHWWith woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.

Microfibre polishing wheel, 15-ply (100mm)Very soft. For shine polishing of precious and non-precious metals as well as plastic. Especially suitable for spots difficult to access which cannot be reach more→ed with rigid discs. Use only with polishing paste or polishing emulsion.

Proxxon Corundum Cutting DiscsUsed to part alloy and metal, Stainless steels and NF metals, as well as wood and plastics.All arbors 2.35mm.

Self-adhesive silicone carbide sanding discs for TSG 250/EFor sanding non-ferrous metals, steel, glass, PC cards, plastics and ceramics.Ø 250mm. Includes silicone film for storing used sanding discs.

Proxxon 13 Piece Modeller's SetFor cutting, milling, polishing and drilling.Two fine cylindrical milling bits 2.3 mm diameter, 2 carborundum grinding bits (ball and cone), 1.0 and 2.3 mm micro dr more→ills. 1 saw blade of 22 mm diameter, 5 cutting discs of 22 mm diameter and 1 arbor.All shafts 2.35 mm.