Bits & Sockets Sets

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 6 • Bearing Dia Metric: 19 • Sawbore: 8

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 10 • Be more→aring Dia Metric: 42 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 10 • Be more→aring Dia Metric: 40 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 9 • Bea more→ring Dia Metric: 39 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 8 • Bea more→ring Dia Metric: 38 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 9 • Bea more→ring Dia Metric: 36 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 8 • Bea more→ring Dia Metric: 35 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 8 • Bea more→ring Dia Metric: 34 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Bearing Dia Metric: 33 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 5.9 • B more→earing Dia Metric: 30 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 5 • Bea more→ring Dia Metric: 29 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 8 • Bea more→ring Dia Metric: 28 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 5.9 • B more→earing Dia Metric: 27 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 5.9 • B more→earing Dia Metric: 26 • Sawbore: 12

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5 • Cut Length Imperial: 13/64 • Bearing Dia Metric: 25 • Bearing Dia Imperial: 63/64 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5.9 • Bearing Dia Metric: 24 • Bearing Dia Imperial: 61/64 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5.9 • Bearing Dia Metric: 23 • Bearing Dia Imperial: 29/32 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 15 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 14 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 3.96 • Cut Length Imperial: 5/32 • Bearing Dia Metric: 15.9 • Bearing Dia Imperial: 5/8 • Sawbore: 9.5 • Sawbore Imperial: 3/8

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 15.9 • Bearing Dia Imperial: 5/8 • Sawbore: 4.76 • Sawbore Imperial: 3/16

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 15.9 • Bearing Dia Imperial: 5/8 • Sawbore: 3.2 • Sawbore Imperial: 1/8

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 15.9 • Bearing Dia Imperial: 5/8 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 13 • Be more→aring Dia Metric: 43 • Sawbore: 12