Cooling Systems Accessories

16 piece bag of 6-32 30mm screws for attaching fans to XSPC radiators.

Essential tool for Water cooling enthusiastsThis 24-pin jumper from Barrow is a must-have for all water cooling fans who care about the safety of their system. Once your custom loop has been assembled, your system still needs to be filled. For this, the pump requires power from the power supply unit. For safety reasons, the rest of your system should remain free of power.In order not to have to start the whole computer, you simply disconnect your mainboard from the power supply. The bridging plug from Barrow now comes on the connection of the power supply. If you now connect the pump to the power pack and press the power switch, your power pack will supply the pump with power. This is how you …

The ATX bridge tool allows you to start the PSU without the motherboard being connected to the PSU. The tool will fit both 20 and 24pin ATX power supplies.

EK-Cable Pump testing adapter is a simple adapter cable for connecting any liquid cooling pump (with 4-pin fan header) or computer cooling fan with SATA power cable. This adapter is recommended to be used only for testing purposes while leak-testing your loop and is intended to be connected directly to PSU, without the need for powering up the entire system. The cable is approximately 15cm long.Features: - 3-pin fan header to SATA power adapter- RoHS compliant

DetailsEK-ATX Bridging Plug (24 pin)- Ideal for use with 12v Water Pumps to power up without mainboard power.- Fits 24 Pin ATX PSU's

Features:- Bitspower OD16mm hard tube- Cut in 500mm length- RoHS Compliant.- Dimension ( FxH ) : 16 x 500 MM. ( +/-3%)

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 12 mm and an inner diameter of 8 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 12mm- Inner Diameter: 8mm- Length: 500 mm- Compatibility: Connections with 12 mm outside diameter

All requirements that are placed on a connection are fulfilled here: Highflow, form, processing and colouring. Uncompromising development and production have made the Eiszapfen what they are. In brilliant chrome and matte deep black, there are two versions that fit perfectly into any system. With special processes, the coatings are firmly bonded to ensure the longevity of the intense colours. Each port now has the Alphacool logo which makes it unmistakable in addition to its special shape! Due to the beveled edges of the union nut, the O-ring is very firmly pressed against the hard tube, making it even stronger than in its predecessors. This ensures more safety during transport. Design: straight …

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 16 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color whiteConnections:- External thread: G1/4 inch- Hard tube: 16 mm outer diameter (OD)

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of nickel-plated CNC-machined brass. These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling …

EK-Loop D5 Pump Mounting Kit is a mounting kit for D5 pumps that enables users to convert their DDC-powered FLT series combo unit or EK-Mana G2 PC-O11D EVO distribution plate to a D5 variant. It contains a bracket that holds the pump, an o-ring for the pump, and four screws to fasten the bracket to the reservoir. This kit does NOT contain a D5 pump. EK suggests the EK-Loop D5 G3 PWM Motor, which is the most modern version of the D5 pump with a SATA power connector. Compatibility: - 3831109905630 EK-Mana G2 PC-O11D EVO DDC D-RGB Distribution Plate - 3831109851159 EK-Quantum Kinetic FLT 80 DDC PWM D-RGB - Plexi - 3831109819753 EK-Quantum Kinetic FLT 120 DDC PWM D-RGB - Plexi - 3831109819760 …

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of CNC-machined brass with satin-black finish. Black Quantum Torque series fittings are intentionally not painted on the inside to …

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 16 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 16 mm outer diameter (OD)

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 12 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 12 mm outer diameter (OD)

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 14 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 14 mm outer diameter (OD)

The EK-HD PETG Inserts are EK's way of battling against potential hazards that the use of PETG tubes present. PETG tubes are extremely popular because of the ease of use and their flexibility. On the other hand, PETG tubing, especially the thin tube wall models (10/12) are prone to deformation when exposed to high temperatures (40°C and above). The deformation rate depends on the duration and maximum temperature reached. These temperatures can be reached with pump failures, water block clogging, etc. The EK-HD PETG Inserts provide a safety measure for 12mm OD / 10mm ID PETG tubes which prevents the tube wall from collapsing inside the compression fitting. The EK-HD PETG Insert is low …

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 16 mm and an inner diameter of 12 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 16mm- Inner Diameter: 12mm- Length: 500 mm- Compatibility: Connections with 16 mm outside diameter

Connecting individual water-cooling components requires extra attention to detail in regards to choosing the correct fittings as well as the correct number. Assembling a cooling loop with the incorrect fittings to hand or not enough of them can quickly turn into a frustrating experience - as well as holding up your build. This is a chrome-plated adapter used for extending connections within water-cooling loops. This is a chrome-plated adapter used to extend connections within a water-cooling loop. The adapter is a coupling for connecting two hard tubes with 16 mm outer diameters at a 45 degree angle. The sleeve nuts are made from aluminium and two rubber rings ensure a watertight seal.Specification:Material: …

The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while …

EK-Loop Bending Cord for 10mm ID Hard Tube - 0.33m is a silicone cord for bending acrylic and PETG tubing. It features high heat and abrasion resistance, helping the tube not to deform while subjected to the high temperatures of a heat gun during the bending process. Using a heat gun and the enclosed silicone bending cord (insert), it is possible to make customized pieces of solid tubing. Use the hacksaw to cut pieces to length and sandpaper to chamfer and smooth out the edges. For a perfect chamfer, EK recommends the use of the EK-HD Tube Reamer tool. EK-Loop Bending Cord is 0.33m long. It is made of flexible silicone with high elasticity, allowing it to be inserted and pulled out of a bent …

Selecting the correct choice and number of connectors for individual water cooling components is essential, if this stage goes awry the experience can quickly become one beset with delays and frustration. Phanteks offers a comprehensive range of connectors that provide the perfect solution whatever the requirement - whether it be adapters, tubing or angled-fittings. The design is solid and comes with sealing rings. This allows connectors to remain water resistant and provide long term durability. This is a premium edition black stop-fitting with knurled edges for improved grip and a G1/4" thread. This allows unneeded temporary or long term openings to be blocked off, such as unused ports on …

All requirements that are placed on a connection are fulfilled here: Highflow, form, processing and colouring. Uncompromising development and production have made the Eiszapfen what they are. In brilliant chrome and matte deep black, there are two versions that fit perfectly into any system. With special processes, the coatings are firmly bonded to ensure the longevity of the intense colours. Each port now has the Alphacool logo which makes it unmistakable in addition to its special shape! Due to the beveled edges of the union nut, the O-ring is very firmly pressed against the hard tube, making it even stronger than in its predecessors. This ensures more safety during transport. Design: straight …