Microphones Chord

SU20 Compact Dual UHF Microphone Sets
Dual UHF wireless microphone system with a compact receiver supplied with hardware for mounting 1 or 2 units into a 1U 19 rack space. BNC cables and detachable antennas are provided for rear or front mounting as required. Each transmitter is powered by 2 x AA batteries and the beltpack version is supplied with both neckband and lavalier microphones. Output is provided individually on balanced XLR connectors or mixed to a single 6.3mm jack socket. Providing all the functionality of a dual UHF system in a compact half-rack format.

• Up to 2 sets (4 microphones) can be used together
• Available in handheld or beltpack versions with 2 carrier …

0.5m Classic Microphone Leads XLR Female - XLR Male
CLASSIC XLRF to XLRM LEADS
High quality balanced microphone/audio leads for exceptional sound quality and reliability. High grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a male XLR connector and at the other end with a female XLR connector.

Cable diameter 6mm?
Conductors 20 x 0.08mm?
Connectors Male XLR Female XLR
Pin-out Balanced: 1-Ground 2-Hot 3-Cold

Replacement NU4 Beltpack TransmittersReplacement bodypack transmitters for the Chord NU4 wireless UHF system. Available in 4 different frequencies.DetailsPower supply 3Vdc (2 x AA batteries)Dimensions 205 x 68 x 25mmWeight 76g (no batteries)

Replacement NU4 Beltpack TransmittersReplacement bodypack transmitters for the Chord NU4 wireless UHF system. Available in 4 different frequencies.DetailsPower supply 3Vdc (2 x AA batteries)Dimensions 205 x 68 x 25mmWeight 76g (no batteries)

Replacement NU4 Beltpack TransmittersReplacement bodypack transmitters for the Chord NU4 wireless UHF system. Available in 4 different frequencies.DetailsPower supply 3Vdc (2 x AA batteries)Dimensions 205 x 68 x 25mmWeight 76g (no batteries)

Replacement NU4 Beltpack TransmittersReplacement bodypack transmitters for the Chord NU4 wireless UHF system. Available in 4 different frequencies.DetailsPower supply 3Vdc (2 x AA batteries)Dimensions 205 x 68 x 25mmWeight 76g (no batteries)

Chord Electronics 171.844UK

UHF Wireless Beltpack Microphone SystemWireless microphone system with fixed UHF beltpack transmitter and half rack-width receiver. Supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.DetailsPower supply 12-18Vdc, 350mA (mains adaptor included)Batteries 2 x AA (for transmitter - included)Range 60mSignal to noise ratio >105dBTHD 85dBOutput impedance 2.2k OhmsOutput level 400mV (balanced), 200mV (unbalanced)Dimensions : receiver 44 x 198 x 190mmWeight : receiver 710gDimensions : transmitter 205 x 68 x 25mmWeight : transmitter 76g (no battery)

Microphone flight case.Specially designed aluminium finish case for safe storage of microphones. Inside is a pre-diced foam insert to suit any type of microphone, there is also space for your leads and accessories. The outside of the case features aluminium extrusions, a tough diamond patterned finish, carry handle and lockable catches via the supplied keys.Strong and stylish designLockable catches, 2 keys suppliedStorage for cables and connectors

LM-35 cardioid lavalier mic

Lavalier tie-clip microphones for use with VHF and UHF beltpack transmitters.
Threaded 3.5mm mono jack connector
Suitable for Chord, Citronic and QTX beltpack transmitters
Compatible with most laptop mic inputs
Transducer type - Cardioid condenser
Weight - 20g
Microphone : dimensions - 27 x 12mm
Material - Metal & plastic
Colour - Black
Power supply - 3Vdc

Chord Electronics 171.969UK microphone Black Lavalier/Lapel microphone

LLM-35 Lightweight cardioid lavalier micLavalier tie-clip microphones for use with VHF and UHF beltpack transmitters.Threaded 3.5mm mono jack connectorSuitable for Chord, Citronic and QTX beltpack transmittersCompatible with most laptop mic inputsTransducer type - Cardioid condenserWeight - 15gMicrophone : dimensions - 23 x 12mmMaterial - PlasticColour - BlackPower supply - 2-10Vdc

BNC Antenna Extension LeadCoaxial extension cable with a male BNC connector at one end and a panel-mountable female BNC connector at the other to enable front mounting of an antenna for rack mounted wireless systems.DetailsDimensions 540 x 20mmØWeight 43gConnectors Male to female BNCImpedance 50 ohms