Microphones

Pro sound for your kit. The Shure PGADRUMKIT6 Drum Microphone Kit gives you everything you need to capture the power of percussion. From the crack of a snare to the deep thump of a kick. Kickstart your mic collection. Each microphone has a unique character tailored to compliment different types of drum. Whether youre on stage or in the studio youll get accurate sound every single time. Rigorously tested Shure have built these mics to withstand serious wear and tear. Thanks to a tough metallic construction even accidental drum hits wont break them. The PGA Drum Kit 6 is essential if you need solid sound with long-lasting reliability.

Microphone Holder

Biamp Parl? Tcm-X Ceiling Microphone5 Years Warranty The Parl? Tcm-X Is An Avb Low-Profile Ceiling Microphone For Use In Tesira? Systems. Comprising A Network Box And A Ceiling Microphone Each Microphone Includes Beamtracking Technology With Four 90-Degree Zones Providing Full 360-Degree Coverage Of The Meeting Space. The Tcm-X Microphone Delivers The Same Level Of Performance As Our Other Beamtracking Microphones In A Sleek Unobtrusive Design That Mounts To The Ceiling. The Tcm-X Actively Tracks And Intelligently Mixes Conversations From Around The Table Allowing Far-End Participants To Experience The Conversation As They Would A Face-To-Face Meeting. Each Network Box Has Its Own Digital Signal …

Biamp Parl? Tcm-1 Pendant Microphone5 Years WarrantyThe Parl? Tcm-1 Is An Avb Ceiling Microphone Comprised Of A Pendant Microphone And Plenum Box. Each Microphone Includes Beamtracking Technology With Three 120-Degree Zones Providing Full 360-Degree Coverage Of The Meeting Space. The Plenum Box Is Equipped With An Additional Rj-45 Connector For Daisy-Chain Connections; A Maximum Of Three Microphones Are Permitted Per Daisy Chain (One Tcm-1 Or Tcm-1A Required Plus Up To Two Tcm-1Ex).• Beamtracking Technology Actively Tracks And Intelligently Mixes Conversations• Three 120? Zones For 360? Coverage• Plenum Box Includes Dsp For Beamtracking• Led Mute Status Indicator• User-Adjustable …

Biamp Parlé TCM-1A Pendant

Biamp Parlé TCM-1A Pendant

Microphone Shield 5pcs Colour

A pack of 5 foam windshields to fit most sizes of dynamic microphones.
Available in black or coloured (1 x black, 1 x red, 1 x orange, 1 x yellow and 1 x blue)

The Orosound Tilde detachable boom-mic captures your voice with exceptional clarity while actively reducing background noise.
Be assured of crystal-clear communications even in noisy environments.
-
Tilde Pro headset features a unique modular design that allows you to choose whether or not to add a magnetic boom microphone
depending on your preferences.

Take control of your Austrian Audio OC818 microphone. The Austrian Audio OCR8 Bluetooth Remote unlocks the true power of the already excellent Austrian Audio OC818 microphone. Control directional characteristics and pad switches all from your seat via Bluetooth from your mobile.

Boasting crystal-clear audio quality, this sleek USB gaming microphone will immerse you in the heart of the gaming action like never before. It’s customizable LED lighting adds a touch of flair to your gaming setup, creating a captivating atmosphere to match your gaming mood. Incredibly easy to set up, thanks to plug-and-play functionality, allowing you to jump into online chats without delay. The microphone’s versatile stand allows you to adjust its position effortlessly, ensuring the perfect angle for optimal recording and voice clarity. Plug and Play Adjustable tripod stand RGB rainbow light Headphone jack Gain control Touch mute function Polar pattern: cardoid Sensitivity: -41±2dB Signal noise…

Replacement NU4 Beltpack TransmittersReplacement bodypack transmitters for the Chord NU4 wireless UHF system. Available in 4 different frequencies.DetailsPower supply 3Vdc (2 x AA batteries)Dimensions 205 x 68 x 25mmWeight 76g (no batteries)

Replacement NU4 Beltpack TransmittersReplacement bodypack transmitters for the Chord NU4 wireless UHF system. Available in 4 different frequencies.DetailsPower supply 3Vdc (2 x AA batteries)Dimensions 205 x 68 x 25mmWeight 76g (no batteries)

Replacement NU4 Beltpack TransmittersReplacement bodypack transmitters for the Chord NU4 wireless UHF system. Available in 4 different frequencies.DetailsPower supply 3Vdc (2 x AA batteries)Dimensions 205 x 68 x 25mmWeight 76g (no batteries)

Replacement NU4 Beltpack TransmittersReplacement bodypack transmitters for the Chord NU4 wireless UHF system. Available in 4 different frequencies.DetailsPower supply 3Vdc (2 x AA batteries)Dimensions 205 x 68 x 25mmWeight 76g (no batteries)

NU4 Quad UHF Wireless Microphone SystemUHF wireless system with 4 independent channels. The receiver is 19" rack-mountable and features 4 separate XLR outputs or a mixed jack output. Available in sets with 4 handheld or 4 beltpack transmitters (with a choice of neckband or lavalier microphone for each beltpack) or a combo set with 2 of each. Suitable for vocal groups, theatres and presentations.DetailsDimensions : receiver 482 x 225 x 44mm (inc. rack ears)Weight : receiver 3.0kgPower supply 12-18Vdc 500mA adaptor (supplied)Batteries 8 x AA (included)Carrier frequencies Red 864.8 ,Green 864.3, Blue 863.42, Yellow 863.1 (all in MHz)Wireless range Up to 60m

UHF Wireless Beltpack Microphone SystemWireless microphone system with fixed UHF beltpack transmitter and half rack-width receiver. Supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.DetailsPower supply 12-18Vdc, 350mA (mains adaptor included)Batteries 2 x AA (for transmitter - included)Range 60mSignal to noise ratio >105dBTHD 85dBOutput impedance 2.2k OhmsOutput level 400mV (balanced), 200mV (unbalanced)Dimensions : receiver 44 x 198 x 190mmWeight : receiver 710gDimensions : transmitter 205 x 68 x 25mmWeight : transmitter 76g (no battery)

High-quality suspension shock mount that supports many large diaphragm RØDE microphones, and provides isolation from external physical factors that may cause unwanted rumble and vibrations. It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility. Dimensions: 210 x 133 x 210 mm. Weight: 682 g.
Made in: Austria

Suspension shock mount with ring clamp adaptor that allows the use of RODE Microphones to be used with professional video cameras. It supports camera clamp mounts that effectively grip a 24 or 27mm barrel. The design of the suspension shock mount means the microphone is physically isolated from the stand ensuring that there is no unwanted rumble or vibrations in your recording. 1/4 '' and 3/8 '' threads at the base of the mount allow for easy attachment to a boompole or other accessories. Dimensions: 94 x 60 x 130 mm. Weight: 105 g.
Made in: China

10-Button Convenience Paging Station With Gooseneck MicrophoneThe Npx G1100 Is A 10-Button Convenience Paging Station With Gooseneck Microphone For Use In Qt X And Tesira Systems. The G1100 Features Embedded Dsp And On-Board Memory To Support Standard And Advanced Public Address Functionalities. Digital Audio And Control Data Can Be Transmitted By Either Avb Or Dante. The Npx G1100 Can Store 999 User-Configurable Page Codes And Up To 10 Prerecorded Messages. Additionally The G1100 Supports Both Tabletop And Wall Mounting With A Removable “Foot” That Allows The Paging Station To Be Mounted Flat Against Any Surface And A K-Slot Is Included For Enhanced Physical Security Via An Optional …

Biamp NPX G1040 Black Conference microphone

SQR 60CM LSPKR

The Gravity MS TBA 01 Desk Mounted Microphone Arm makes creating content easy. Just clamp it to your desk screw on your microphone and easily configure it to the perfect position. This is made possible by the arms dynamic range of movement combined with the four 90° rotation options for the microphone. Youll find that whatever surface you clamp it to the MS TBA 01 stays secure and does its job. It is built from study aluminium with a integrated cable guide to keep everything neat. For speedy but precise positioning of your microphone at home look no further than this microphone arm from Gravity.

Wide range of features
Durable construction
Consistent performance

Microphone Holder for Guitar Cabinets. Features: The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth – this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand. Material: aluminium. Clamping width: 300 - 400 mm. Extension length: 250 mm. Threaded connector: 3/8''. Weight: 0,6 kg.
Made in: China
Weight: 600 g