Amplifiers

Dual reamping direct box. The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or 6,35 mm instrument level inputs. The unit has two high quality isolation transformers that prevent ground loops when connecting various systems together. Frequency response is 20 Hz - 20 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,40 kg.
Number of Outputs: 4
Type: DI Box;Ampbox;Splitter
Made in: China
Number of Input Ports: 4
Rackmountable: No
UK/EU Power supply included: No

dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and groundloop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output …

DI Box / Desktop / Number of Channels 2

The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone. While the DM1 DYNAMITE provides a massive +28dB of clean, transparent gain.With a sophisticated class-A design and specially-selected high-grade FETs, sE active inline preamps have vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain provided is always consistent regardless of the connected load, thanks to the DM2's eight switchable impedance setting and the DM1's dedicated buffer amplifiers.For optimum results, they recommend you plug the DM1 or DM2 directly …

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.
Number of Channels: 1
Package Contents: Manual<&hellip;

The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The Di4 also functions as multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front of house engineer and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.
Number of Outputs: 4
Made in: China
Type: DI Box
Rackmountable: No
UK/EU Power supply &hellip;

DI Box / Desktop / Number of Channels 1

The Eversolo DAC-Z6 & Amp-F2 Hi-Fi Bundle includes the DAC-Z6 DAC and Headphone Amplifier alongside the AMP-F2 Power Amplifier. Both products are crafted to a professional standard for fantastic user experience and sound quality no matter what source you use. As well as helping you get the most out of both high-end headphones and stereo speaker systems this bundle helps you save money when purchasing products together! Find out more about the products in this bundle down below.

The Tangent DAC II a high-end hi-fi DAC is equipped with a Sabre ES9023 24-bit Stereo Audio DAC. It has multiple digital inputs like coaxial optical digital and USB as well as the latest AptX Bluetooth technology for efficient wireless streaming. Further functionality includes the use as a headphone amplifier. With both RCA and XLR balanced outputs it pairs well with Tangents PowerAmpster II or other power amplifiers. Its sturdy construction and built-in power supply ensure durability and safety during use. The DAC II is designed for convenience with an intuitive interface and compact design. It suits music enthusiasts desiring top-tier sound quality or those intending to enhance their audio …

Microphone Pre-Amp / Desktop / Number of Channels 1

Microphone Pre-Amp / Desktop / Number of Channels 2

Passive noise eliminator. This device easily removes noise without any signal degradation. It has balanced and unbalanced 6.35 mm TRS inputs and outputs. Frequency response: 10 Hz - 50 kHz. Dimensions: 114 x 73 x 38 mm. Weight: 0.4 kg
Type: Noise Reducer
UK/EU Power supply included: No
Made in: China

Focusrite Clarett OCTOPRE is an 8-channel microphone preamplifier and AD / DA converter with ADAT digital interface. Clarett's leading preamplifiers operate at 24 bit / 192 kHz and offer a dynamic range of up to 118 dB. AIR technology, which adds airiness and clarity to recordings, emulates the impedance and resonance characteristics of the legendary Focusrite ISA analogue studio preamplifier. Two analog inputs located on the front panel are capable of processing both microphone and direct instrument (Hi-Z) signals.

The transmitter has eight analog inputs with combined XLR / TRS connectors. Each input channel is equipped with insertion points for connecting external processors. The signal can …

XLR Microphone Adapter for Mirrorless Cameras for Professional Quality Video Recording
Equipped with 2 XLR/TRS input terminals, you can use the optimum microphone according to the set and environment
Equipped with a high-performance AD converter, it can directly transmit digital audio without deterioration to the camera via a accessory shoe. (Compatible manufacturers: Canon, FUJIFILM)
Equipped with a high-performance HDDA mic preamplifier for high sound quality, low noise, and wide dynamic range (microphone / line level switching, + 48V phantom power supply compatible)

Microphone Pre-Amp

Microphone Pre-Amp

FiiO BTR7 is designed with a complete audio architecture consisting of a premium Dual DAC chipset with a Low-pass filter and dual THX amplifier chips. It can easily compete against a premium HiFi player with its excellently detailed and precise sound performance. FiiO BTR7 is designed with dual Sabre DAC chipsets. It houses two ES9219C DAC chips from ESS Sabre Technologies. Supported by the latest XMOS XU208 8-core USB controller chipset, the BTR7 can also be used as a high-resolution USB DAC/AMP. It handles native 32-Bit/384kHz PCM signal decoding. Fiio has features Qualcomm’s latest QCC5124 Bluetooth chipset on the latest BTR7. It delivers impressive Bluetooth connectivity with ultra-low …

The BT Box S2 HD is Pro-Jects next generation high-definition Bluetooth receiver using latest technologies like Bluetooth 5.0 and aptX-HD for elevating your mobile Bluetooth listening to true Hi-Fi stereo levels. 

DI Box / Desktop

The discounted set with accessories is put together in such a way that all the products form a perfect harmony. Buying the set also saves you money, as it is cheaper than the products individually. The main picture showing the set is for illustrative purposes.
Type: Distortion
Made in: China
Power Supply: 9V;Adapter or Battery
Variant: Convenient Muziker Set
Bundle: Yes
Battery Type: 9V
UK/EU Power supply included: No
Offer Configuration: Set
Battery Operation: Yes

BUZZSTOPIII
5 Years Warranty

Universal Stereo Input Adapter

The BUZZSTOP-MKIII is a universal input adaptor that can be used for all connections and extensions. The input level selector allows you to convert any amplifier output to any line-level output balanced or unbalanced. (E.g.: You can convert a 100V loudspeaker signal into a balanced or unbalanced line level signal). The BUZZSTOP-MKIII also makes it possible to convert an unbalanced signal into balanced and vice versa.

A 19” adaptor set is available. This way it is possible to mount 2 BUZZSTOP-MKIII in a 19” rack. (REF: BUZZ-19)

Often the BUZZSTOP-MKIII is used to solve humm and buzz problems via the build-in …

Integrated Amplifier / Stereo / Output power per channel 35 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Power Amp / Stereo / Output power per channel 100 Watt / 1x S/PDIF IN (TOSLINK Optical) / Bluetooth

Integrated Amplifier / Stereo / Output power per channel 50 Watt / Bluetooth