Amplifiers

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

DI Box / 19 Inch Size / Number of Channels 4 / Rack Height 1 RU

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Weight: 0,36 kg
UK/EU Power supply included: No
Power Supply: 48V Phantom
Battery Operation: Yes
Made in: Germany
Type: DI Box

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:
Made in: Germany
Type: DI Box
UK/EU Power supply included: No

P44800 amp 2 x 400W + 800W sub

2.1 power amplifiers with 2 channels for mid-top cabinets and a single high power sub output with integral active crossover. Designed as a cost effective and efficient solution for bi-amplified sound systems where subs and top cabinets are run together from this single amplifier.
Mono summed sub output (can be full range)
Active crossover with variable frequency
Stereo full range output
Power rms @ 8 Ohms - 250 + 250 + 500W (sub)
Power rms @ 4 Ohms - 400 + 400 + 800W (sub)
Weight - 21kg
Fuse rating - F12A

Microphone preamplifier for connecting up to 2 microphones to one line input of a hi-fi system, an amplifier or a mixer. Stereo or 2 x mono, Wide frequency range, Black metal case, Supplied with plug-in PSU.
UK/EU Power supply included: No
Power Supply: Adapter
Made in: Taiwan
Battery Operation: No

Compact one-channel microphone preamplifier with switchable 30V phantom power that provides one balanced microphone input and one balanced 6.3 mm input. It also features a Gain control up to 50 dB, and clip LED indicators. Dimensions: 113 x 92 x 40 mm. Weight: 345 g.
Frequency Range: 10 Hz - 30 kHz
Power Supply: Adapter
Made in: China
Battery Operation: No
UK/EU Power supply included: No
Microphone Input: Yes
Phantom Power: Yes

Microphone Pre-Amp / Desktop / Number of Channels 1

High-quality microphone and line preamp mixer. It has the size of a floor pedal, and is suitable for singers, guitarists and bassists. It serves as a preamp, effects loop, and DI pedal. It is the ideal choice to achieve high quality vocals in live performance. It can easy integrate studio effects in to the vocal lines. It has an optional mixing control with three types of outputs and effects loop switch that can serve as on/off or momentary function selector. It can mix external audio sources with AUX connection. It connects via inputs and outputs 1 x 1/8", 1 x 1/4" and 1 x XLR. It is powered by an included 9VDC source. Dimensions: 91 x 67 x 38 mm. Weight: 0.43 kg.
Made in: China

DI box pedal. Symmetrical/unsymmetrical output, Gain switch, Speaker simulation. Metal housing. True Bypass. Power: optional 9V DC power supply. Dimensions: 93.5 mm (L) × 42 mm (W) × 52 mm (H), Weight: 140 g
Rackmountable: No
Power Supply: 9V;Adapter
UK/EU Power supply included: No
True Bypass: Yes
Type: DI Box
Made in: China

Digital-to-Analogue Converter

DI Box / Desktop / Number of Channels 2

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…

From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose fr…

Convert your digital audio signals (Toslink or coaxial) into a left/right stereo sound signal.Very practical if your audio amplifier has no or too few digital audio inputs.With improved 192 kHz sampling rate, for the best sound reproduction.Supports uncompressed, digital stereo signals.Supports 16 or 24 BIT, 8, 32, 44.1, 48, 96, 176.4 and 192 kHz sampling frequencies.With Wolfson DAC (digital-analog converter) for the best sound reproduction.Features:Audio input:1 x optical (Toslink), 1 x coaxial (RCA).Audio output:2 x R A (L/R).Sampling rate:192 kHz, 24 bit.Audio formats:2 CH PCM Stereo.Signal to noise ratio:>90 dB.Channel separation 90 dB.Frequency range:20 Hz ~ 20 kHz +/- 3 dB.Dimensions (…

Integrated Amplifier / Stereo / Output power per channel 25 Watt / Bluetooth

Acoustic guitar preamp/DI with saturation and compression EQ. Analog saturation: Often used by studio engineers in post-production, saturation adds warmth, dimension, and pleasing harmonics while smoothing the signal for an enhanced mix. The Session DI’s proprietary saturation is voiced specifically for the acoustic guitar and transports studio analog warmth and inspiring playability to the stage. Compression EQ: Unlike standard compression that can squash the entire range of your signal, the Session DI’s Comp EQ features 3 narrowly focused bands of compression that tame common problematic frequencies and uncover the voice of your guitar. The low, mid, and high frequency compressors are esse…

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included). Colour: Black.
Battery Operation: Yes
UK/EU Power supply included: No
Type: DI Box
Made in: China

The FiiO KA17 DAC and Headphone Amplifier is tailored for audiophiles and music enthusiasts looking to balance value for money and superior sound quality. Equipped with dual ES9069 DACs and the XMOS XU316 chip this amplifier supports full MQA decoding and offers a high sampling rate ensuring your music is reproduced with impeccable clarity and detail. The KA17 also boasts a multistage balanced THX AAA 78+ headphone amp delivering powerful balanced audio output up to 650mW.Refined for their portable line of products FiiO have integrated this amplifier with Desktop Mode which when activated optimises the DAC and amp power output for an enhanced listening experience. The inclusion of a 0.91-inch …

From the portable desktop-level unit M17, the portable desktop-grade DAC and amp Q7, to the more portable yet desktop-capable M15S, audiophiles’ warm reactions to these models prove many love desktop-level audio gear. After being successfully applied to the three high-end models, the desktop mode will now evolve and be applied to audio dongles. The FiiO KA13 mini desktop amp features a desktop mode to fully unleash its performance.
With two high-performance yet highly efficient CS43131 DAC chips and two low-noise SGM8262 op-amps, this truly “dual-core” golden combo brings excellent performance. Rediscover your music collection again full of newly discovered details with the KA13.
The KA13 f…

Revitalize your television or computer with this incredible decoder, and experience a whole new level of sound. Whether you're at home or in the office, paired with speakers or headphones, you'll be able to enjoy delightful and captivating music.
MAX Power Output up to 1400Watts: Experience rich audio details with a powerful output of up to 1400mw and easily drive high impedance HIFI headphones up to 350 ohms. Recommended for headphones with 8-350 ohm impedance.
[Variety of inputs+outputs]: Supports USB/coaxial/optical inputs, with optical and coaxial inputs. 4.4mm/ 6.35mm (1/4 in.) headphone out/RCA line-out/ Coaxial outputs.
A sleek and compact desktop accessory with an aluminum alloy body.…

Summing Amp effect pedal. The device can combine two signals into one mono signal. It is equipped with one foot switch, two inputs and one output. Thanks to its features, it can send two signals to one amplifier or add a stereo signal to mono. The effect has a robust metal construction and is powered by a 9V adapter (not included).
Power Supply: 9V;Adapter
Made in: USA
UK/EU Power supply included: No

Microphone Pre-Amp / 19 Inch Size / Number of Channels 4 / Rack Height 2 RU

Headphone Amp