Submersible (Drainage) Pumps

The Draper SWP330/750 is a 750W submersible dirty water pump designed to remove heavily contaminated water containing solids such as mud, sand, leaves and debris from flooded or waterlogged sites. Unlike standard clean water pumps, this model is built to handle thick, contaminated water without clogging or sustaining damage. With a maximum particle diameter of 35mm and an output of up to 330 litres per minute, it's capable of clearing large volumes of dirty water quickly and effectively. Suitable for use on construction sites, flooded basements, agricultural land, ponds and septic systems, the pump can be submerged to a depth of 7 metres with a maximum head height of 10 metres. The automatic …

The Draper SWP330/1100 is a 1100W submersible dirty water pump designed to rapidly remove muddy, debris-laden water from flooded basements, construction sites, and other demanding environments. Unlike standard clean water pumps, this submersible pump is built to handle thick, contaminated water containing solids up to 35mm in diameter — particles that would quickly clog or damage a conventional pump. With a maximum output of 330 litres per minute and a maximum head height of 9 metres, it delivers the performance needed for serious site drainage and flood clearance. The automatic float switch monitors water levels continuously, switching the motor on and off as required without the need for ma…

The Draper SWP260 is a 550W submersible dirty water pump capable of handling water contaminated with solids such as mud, sand, leaves, and debris, making it well-suited to flooded land, construction sites, basements, ponds, and septic systems. Unlike standard clean water pumps, the SWP260 is designed to move thick, contaminated water without the risk of clogging or internal damage. With a maximum output of 260 litres per minute and the ability to pass solids up to 35mm in diameter, it handles demanding site conditions where lesser pumps would fail. The pump can be submerged to a depth of 7 metres and features an automatic float switch that activates and deactivates the motor in response to …

The Draper SWP130 is a 250W submersible clean water pump designed to remove water quickly and efficiently from a wide range of domestic and light commercial applications. With a maximum output of 130 litres per minute and a 10m power cable, it's well suited to demanding water removal and transfer tasks. Ideal for clearing flooded basements, emptying pools and draining hot tubs, the SWP130 is also a practical choice for irrigation systems, garden water features and rainwater harvesting. Although designed for clean water use, it can handle small particles such as gravel and fine debris up to 3mm in diameter. The pump can be submerged to a depth of 7m and features an automatic float switch that …

SPREADER L

Deep Well Pump TDP 370 EPowerful 700 W stainless steel pump delivers up to 5,100 l/h of clear water from up to 40 m

This water pump provides a simple means to extract water from butts and can be used with chlorinated swimming pool water. An ideal garden tool the CWBP300 can be adjusted in length for use with butts of different sizes and its 3/4'' BSP threaded outlet has a quick fit hose connection. Completing this tool is a reliable build and a powerful 400W for optimum performance.

With a stainless steel body, cast iron base and powerful 1530W motor offering an impressive 500 l/min flow rate, the CSP1530 Sewage Pump can pump clean and dirty water including solids with a diameter up to 50mm. This sewage pump is ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

With a stainless steel body and unique water cooling system the CPRP560 Residue Water Pump can be used for both clean and dirty water applications. This pump can shift water containing particles up to 7mm dia and features the ability to clear residue water down to 1mm making it ideal for removing water from floors, low level pools and puddles.

The Clarke CPCDP500 Contractor Dewatering Pump offers a robust and portable design, suitable for DIY and Trade purposes in pits, trenches, tunnels and water tanks with slurry. This pump is fitted with a 500W motor, offering a 240 l/min flow rate, designed for shifting clean and dirty water including solids up to 7mm. The CPCD500 is manufactured with a stainless steel drive shaft, impeller and base plate ensuring a longer life time, plus it is completed with a convenient carry handle for easy transport.

Clarke's CSV4A 1300W Submersible pump with float switch is an electric powered water pump that is perfect for draining and transferring water in many different situations, with its massive 417L /min flow and 11m Max. head. Examples of use include draining cellars and basements, ditches, footings etc. Note: Suitable for use with clean water or dirty water.

With a stainless steel body and powerful 830W motor offering an 180 l/min flow rate and a lift height of 20m, the CHHDP830 High Head Draining Pump can pump clean and dirty water including solids with a diameter up to 8mm. This draining pump is fitted with non-clogging vortex impeller and offers high-lift waste water transport, making it ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

With a cast iron body and powerful 870W motor, the CGP870 Grinder Pump is the ideal pump for the grinding and disposal sewage and waste water. The pump body is protected by a durable dual-layer coating to avoid any risk of leaks. Plus, the pump also features thermal cut-out overload protection.

Designed to pump clear water from ponds & pools. Suitable for operating waterfalls fountains irrigating gardens and draining cellars sinks cisterns & baths. Includes a fitted float switch for automatic water level control. Stainless steel pump body.- Max flow rate 91 l/min- Max head (lift height) 30m- 800W 230V induction motor with overload protection- 1 BSP threaded pump outlet- Integral carry handle for easy transportationPTDCLA7236070

A heavy duty submersible pump suitable for draining pits, sumps, ditches, footings etc. Can be used for both clean and dirty water applications including water with particles upto 35mm dia. Includes a fitted float switch for automatic water level control. Stainless steel pump body & motor case.

A heavy duty submersible pump suitable for draining pits, sumps, ditches, footings etc. Can be used for both clean and dirty water applications including water with particles upto 35mm dia. Includes a fitted float switch for automatic water level control. Stainless steel pump body.

For demanding drainage tasks where space is limited, Clarke’s PSV5A submersible pump pairs a 750W motor with an integrated float switch to help control pumping in confined areas. Designed for heavy duty work around pits, sumps, ditches and footings, it can be used with clean or dirty water and handles particles up to 35mm in diameter. Operation can be set to manual or auto mode. In auto mode, the integrated float switch turns the motor off once the water level drops to a defined level, supporting unattended draining. A rated maximum flow rate of 217 l/min combines with a minimum/maximum head of 0m/8m, and the pump is suitable for a maximum immersion depth of 7m. Flexible positioning is supported by…

Ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. Shifts both clean and dirty water including particles upto 35mm dia. Fitted with a float switch for automatic water level control.

For demanding drainage tasks, Clarke International’s PSV3A dirty water submersible pump is built for use in pits, sumps, ditches and footings where dependable water removal is required. It moves clean or dirty water and handles particles up to 35mm diameter, making it well suited to tougher site conditions. Power comes from a 400W, 230V induction motor with overload protection, while the float switch provides automatic water level control. A 1 1/2” BSP threaded outlet supports straightforward connection, with a stepped adaptor fitting for 32 mm (1 1/4”), 25 mm (1”), or 19 mm hoses, secured with a hose clamp. An integral carry handle helps when moving the pump between jobs. Key features Max flo…

The CSE400A submersible water pump is manufactured from tough durable corrosion proof materials and is ideal for a wide range of clean water pumping applications. Its fitted with a float switch for automatic water level control has a low consumption ele- Max. flow rate 115 L/min- Max. head (lift height) 8M- 1 diameter (O/D) outlet- Efficient water cooling for long term operation & reliability- 400 Watt 230v motorPTDCLA7231100

This PSV7A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Ideal for pumping clean and dirty water and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface water. Adjustable position float switch automatically turns the pump off when water level drops

This PSV6A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Ideal for pumping clean and dirty water and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface water. Adjustable position float switch automatically turns the pump off when water level drops

Fast, low-level water removal calls for a pump that can clear down close to the floor. Clarke’s PSP125B submersible puddle pump is designed for flooded cellars, sumps and similar areas where water needs shifting efficiently. Powered by a 400W 230V mains motor, it delivers a rated maximum flow rate of 116 litres per minute. An integrated auto sensor starts pumping when water is detected and stops as the level drops to help reduce the risk of running dry. A 3 position auto sensor allows the remaining water level to be set, with removal down to as low as 1mm from the floor. Connection is via a 1.5" BSP outlet, supplied with an additional non-return valve and a 3 step outlet adaptor for common ho…

Clarkes top quality submersible pump handles both clean and dirty water. Robust build and a heavy duty impellor means the CSV2A Vortex Pump will not only handle dirty brackish water its also able to pass solids up to 30mm diameter. And even better it- Flow rate up to 200l/min- Maximum head (lift height) 8m- Made from tough non-corrosive & rust proof materials Longlife ceramic shaft for reliability- Low consumption 620 Watt 230V motor with overload protection- Auto start / stop float sw- Outlet collar & 90 elbow suitable for & 1 diameter hosePTDCLA7230602