Submersible (Drainage) Pumps
prices on 337 modelsWhen you make a purchase through links on our site, we may receive a affiliate commission.
 |  |
| |
 | |
 | This is a powerful submersible dirty water pump that can be used to process large amounts of dirty water/wastewater with solids up to 30 mm. Water level This pump is fitted with a float switch, which means that it switches on/off automatically based on the water level. * Switches on automatically at a water level of 39 cm * Switches off automatically at a water level of 20 cm * In manual mode (fastening/raising the float), this pump drains water to a level of 8 cm. If you are looking for a pump that leaves less water/switches on automatically sooner, you can opt for a submersible puddle pump. Summary * The hose that can be used for this device is 1.5" in diameter * The pump is produced in Germany … |  |
 | This is a powerful submersible dirty water pump that can be used to process large amounts of dirty water/wastewater with solids up to 30 mm. Water level This pump is fitted with a float switch, which means that it switches on/off automatically based on the water level. * Switches on automatically at a water level of 39 cm * Switches off automatically at a water level of 20 cm * In manual mode (fastening/raising the float), this pump drains water to a level of 5 cm. If you are looking for a pump that leaves less water/switches on automatically sooner, you can opt for a submersible puddle pump. Summary * The hose that can be used for this device is 1.5" in diameter * The pump is produced in Germany … | |
You may be interested in
 | Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps large soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150w motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 285mm and off at 100mm and work in confined areas. |  |
 | The Extrema 400/11 CX is the medium-range model in TIP's Extrema series. This partly stainless steel pump is highly suitable for processing dirty water, because it is able to process solids up to 40 mm, with a capacity of a maximum of 24,000 l/h. A true powerhouse and at a competitive price. The accompanying connecting pieces allow you to instantly connect your own hose or one from our product range to the pump. Water level This pump is fitted with a float switch, which means that it switches on/off automatically based on the water level. * Switches on automatically at a water level of 40 cm * Switches off automatically at a water level of 25 cm * In manual mode (fastening/raising the float),… | |
 | The FloodMate 1 is an emergency pumping kit for defending property from low level flooding. This set includes a 230V, 100 Watt submersible pump (model BPS100, capable of up 40 litres per minute, through 25mm 1" hose, over 30 metres of level ground). All the contents are supplied in a sturdy, easy-to-carry and store, case with lid and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 3mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Set phase 1 is a non-kink hose that is 10 metres long, and is ideal for pumping near the property e.g. over window ledges, steps, walls … | |
 | The Tallas D-DWP 1000 is a 2-in-1 submersible pump suited for both waste water and clean water. The pump is both suitable for occasional use or for fixed placement in a basement, well or other area where clean or waste water must be automatically removed. The pump is very compact and can therefore be placed in small spaces (approx. 28 cm). The Tallas D-DWP 1000 allows you to adjust the culvert on the pump grid. As a result, you can use the pump for just clean water or a combination of clean and waste water. Adjusting the culvert affects the remaining water level once the pump shuts down. The smaller the culvert on the pump grid, the less remaining water in the room. You can set the pump to automatically … | |
 | The Tallas D-DW 400 is a high-quality, light but durable waste water submersible pump. The pump is both suitable for occasional use or for fixed placement in a basement, well or other area where clean or waste water must be automatically removed. The pump is very compact and can therefore be placed in small spaces (approx. 28 cm). The Tallas D-DW 400 also allows you to adjust the culvert on the pump grid. As a result, you can use the pump for just clean water or a combination of clean and waste water. Adjusting the culvert affects the remaining water level once the pump shuts down. The smaller the culvert on the pump grid, the less remaining water in the room. You can set the pump to automatically … | |
 | This pump drains water to a level of 2 mm and is therefore also called a puddle pump. This model is fitted with a built-in float and has a top outlet so that it can easily operate in small spaces (with a diameter of about 20 cm). The float ensures that the pump switches on/off automatically, which can also be done manually. Water level This pump is fitted with a float switch, which means that it switches on/off automatically based on the water level. * Switches on automatically at a water level of 11.5 cm * Switches off automatically at a water level of 4.5 cm * In manual mode (float switch set at 'manual'), this pump drains water to a level of 2 mm. If you are looking for a pump that switches … | |
 | This pump drains water to a level of 2 mm and is therefore also called a puddle pump. This model is fitted with a built-in float and has a top outlet so that it can easily operate in small spaces (with a diameter of about 20 cm). The float ensures that the pump switches on/off automatically, which can also be done manually. Water level This pump is fitted with a float switch, which means that it switches on/off automatically based on the water level. * Switches on automatically at a water level of 11.5 cm * Switches off automatically at a water level of 4.5 cm * In manual mode (float switch set at 'manual'), this pump drains water to a level of 2 mm. If you are looking for a pump that switches … | |
 | This pump drains water to a level of 2 mm and is therefore also called a puddle pump. This model is fitted with a built-in float and has a top outlet so that it can easily operate in small spaces (with a diameter of about 20 cm). The float ensures that the pump switches on/off automatically, which can also be done manually. Water level This pump is fitted with a float switch, which means that it switches on/off automatically based on the water level. * Switches on automatically at a water level of 11.5 cm * Switches off automatically at a water level of 4.5 cm * In manual mode (float switch set at 'manual'), this pump drains water to a level of 2 mm. If you are looking for a pump that switches … | |
 | The Mizar/S (230V) is ideal for the pumping of chemicals which are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this model also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed … | |
 | The Mizar/S (110V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this unit also benefits from a built-in handle and included hose connector. Completing this product is a 316 grade (1.4401) pressed … | |
 | The Mizar/S (230V) is ideal for the pumping of chemicals which are of a mildly aggressive nature, which would normally corrode lower grade metal or plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and is also suitable for use with light chemicals. This model can pump small soft solids in suspension but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this unit also benefits from a built-in handle and included hose connector. Completing this product is a 316 grade (1.4401) pressed stainless … | |
 | The Floating Tree makes a fantastic decorative addition to any larger pond or lake aiding oxygenation in large stretches of water, leading to a healthier, well-aerated environment. Powered by a submersible pump which attaches to three ballast tanks, the clearer surface water is pulled through this and forced into the air to a height of 150cm, or a width of 450cm! Embrace the natural beauty and tranquillity of flowing water, an age-old attraction to soothe the human mind and engage with the natural world. NOTE: Ensure at least 60cm of clear water above any silt, muck, sediment or dirt which may damage the pump. | |
 | The Select Brand Arvex/S (230V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316 grade … | |
 | The Arvex/S (400V) is ideal for the pumping of chemicals that are of mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed stainless … | |
 | The Arvex/S (230V) is ideal for the pumping of chemicals that are of mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension but is not suitable for ponds or water features, but the included power cable is 10 metres allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed stainless … | |
 | The SA 316-80 submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316-grade cast and pressed stainless steel it is fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. The product is supplied with 10 metres of heavy duty, rubber power cable and the 400V motor is fitted with internal overloads. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together). This model covers most, but not all global seawater conditions. | |
 | The AP Blue Pro is a sumbersible pump suitable for both domestic and professional applications. The pump has a high-head cast iron impeller and is ideal for clean water, rainwater, seepage water and sandy or muddy water containing small particles no larger than 6mm in suspension. Applications include: Domestic and industrial use Agricultural and farming Sewage and treatment works Irrigation | |
 | The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction | |
 | The PTS is a heavy duty submersible chopper pump ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through passage, open multi-channel impeller and double cutting system in suction inlet. | |
24 more item(s)
