Submersible (Drainage) Pumps

The Einhell GE-SP 18 LL Li is a water pump which offers cordless freedom and a powerful motor. It is designed for use with clean, or clear, water - that is, water that is not contaminated by dirt and debris. Part of the Power X-Change system, it can be used with any Power X-Change battery and shares battery compatibility with over 200 cordless tools for the home and garden. Ideal for situations where it is not safe, convenient or feasible to use mains power, the GE-SP 18 LL Li consists of a battery unit connected to the pump itself via a long cable which enables the pump to be immersed down to depths of 4 metres. It has a flow rate of up to 4500 litres per hour and will pump water out until

The Einhell GE-SP 18 LL Li is a water pump which offers cordless freedom and a powerful motor. It is designed for use with clean, or clear, water - that is, water that is not contaminated by dirt and debris. Part of the Power X-Change system, it can be used with any Power X-Change battery and shares battery compatibility with over 200 cordless tools for the home and garden. Ideal for situations where it is not safe, convenient or feasible to use mains power, the GE-SP 18 LL Li consists of a battery unit connected to the pump itself via a long cable which enables the pump to be immersed down to depths of 4 metres. It has a flow rate of up to 4500 litres per hour and will pump water out until

Designed particularly for heavy duty applications, this robust, powerful water pump is ideal for rapidly shifting both clean and dirty water; in fact, it will move solid water borne objects up to 30mm in diameter! Therefore it's ideal for draining pits, sumps, ditches and footings etc. It's made from tough, durable corrosion proof materials and has a really reliable & low power consumption 230V motor for cost effective long term use. It's also fitted with a float switch for automatic water level control and an anti-airlock valve too.

This water pump has been constructed with a corrosion resistant stainless steel casing and cast iron base for long reliable service. This heavy duty 110V submersible pump is suitable for use with clean or dirty water. Ideal for draining ponds, pools and building excavations with a float switch to automatically turn the pump off when the water level drops.

Heavy duty submersible pump suitable for use with clean or dirty water. Ideal for draining ponds, pools and building excavations.

This domestic submersible pump is ideal for clearing flooded cellars, trenches, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.

This water pump provides a simple means to extract water from butts and can be used with chlorinated swimming pool water. An ideal garden tool the CWBP300 can be adjusted in length for use with butts of different sizes and its 3/4'' BSP threaded outlet has a quick fit hose connection. Completing this tool is a reliable build and a powerful 400W for optimum performance.

With a stainless steel body, cast iron base and powerful 1530W motor offering an impressive 500 l/min flow rate, the CSP1530 Sewage Pump can pump clean and dirty water including solids with a diameter up to 50mm. This sewage pump is ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

This self-priming pump can be used for continuous running and provides top quality general duty for clean water pumping. The strong, durable, double insulated case offers a tough corrosion and rust proof construction. This Clarke pump also benefits form a low consumption motor with overload protection and an anti-airlock valve, complete with a long life ceramic shaft for reliability.

This multi-stage 4 impeller pump can pump up to a massive 46m head. Ideal for showers, wells, cisterns and rain water tanks.

With a stainless steel body and unique water cooling system the CPRP560 Residue Water Pump can be used for both clean and dirty water applications. This pump can shift water containing particles up to 7mm dia and features the ability to clear residue water down to 1mm making it ideal for removing water from floors, low level pools and puddles.

The Clarke CPCDP500 Contractor Dewatering Pump offers a robust and portable design, suitable for DIY and Trade purposes in pits, trenches, tunnels and water tanks with slurry. This pump is fitted with a 500W motor, offering a 240 l/min flow rate, designed for shifting clean and dirty water including solids up to 7mm. The CPCD500 is manufactured with a stainless steel drive shaft, impeller and base plate ensuring a longer life time, plus it is completed with a convenient carry handle for easy transport.

Clarkes top quality submersible pump handles both clean and dirty water. Robust build, and a heavy duty impellor means the CSV2A Vortex Pump will not only handle dirty, brackish water, it's also able to pass solids up to 30mm diameter. And, even better, it's fitted with an automatic float switch, a simple yet clever device that switches the pump on as the water level rises, and switches it off once the pump has done it's job and reduced the water level.

With a stainless steel body and powerful 830W motor offering an 180 l/min flow rate and a lift height of 20m, the CHHDP830 High Head Draining Pump can pump clean and dirty water including solids with a diameter up to 8mm. This draining pump is fitted with non-clogging vortex impeller and offers high-lift waste water transport, making it ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

With a cast iron body and powerful 870W motor, the CGP870 Grinder Pump is the ideal pump for the grinding and disposal sewage and waste water. The pump body is protected by a durable dual-layer coating to avoid any risk of leaks. Plus, the pump also features thermal cut-out overload protection.

The Baby Battery submersible pumps runs off the DC power from a 24V battery making it ideal for pumping water from boat bilges, general drainage and transfer. Both reliable and efficient, this pump has a duty cycle of 20 minutes, and comes supplied with a fixed handle, hose coupling, 5 metres of PVC power cable, battery clips and a float switch for automatic level control.

The FloodMate 1 is an emergency pumping kit for defending property from low level flooding. This set includes a 230V, 100 Watt submersible pump (model BPS100, capable of up 40 litres per minute, through 25mm 1" hose, over 30 metres of level ground). All the contents are supplied in a sturdy, easy-to-carry and store, case with lid and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 3mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Set phase 1 is a non-kink hose that is 10 metres long, and is ideal for pumping near the property e.g. over window ledges, steps,

The JCB-WP80T Petrol-Powered Water Pump is a petrol open-frame recoil-start surface trash and dirty water pump from JCB Tools, able to handle demanding water pumping for your business, agriculture and heavy-duty tasks. High-capacity and Efficient JCB EnginePowered by a leading 7.5hp 224cc 4-stroke, single-cylinder OHV air cooled engine, the JCB-WP80T has an impressive pumping capacity of 60,000 litres per hour - a huge 1000L of water a minute! ( 60m3 per hour). This makes it a great option for preventing or minimising flood and managing water in a professional environment, the JCB-WP80T can handle the toughest dirty water pumping task.The 4-Stroke engine doesn’t require any messy mixing of…

The Tsurumi Pump 50TM range is specifically designed for industrial use with dangerous chemicals and seawater. They are all built from titanium to culminate in a pump which is corrosion resistant, exceptional in size and weight and that has brilliant wear resistance too. Combined with the high-performance motor, this chemical and seawater pump will provide you with excellent durability, reliability and simple, effective results every time. Invest in years of specialised expertise with the 50TM pump range.

The Tsurumi Pumps 50TM range of pumps are specifically designed for industrial use with dangerous chemicals and seawater. They are all built from titanium to culminate in a pump that is corrosion resistant, exceptional in size and weight and that has brilliant wear resistance too. Combined with the high-performance motor, this chemical and seawater pump will provide you with excellent durability, reliability and simple, effective results every time. The automatic version of this pump comes with a twin-ball float switch, for precise automatic operation, this is adjustable and features an integral transformer to give a safe low voltage of 24 volts at the float end. The floats have a rounded

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Automatic - will turn on at 607mm and off at 115mm with some adjustment to turn on lower.

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Automatic - will turn on at 607mm and off at 115mm with some adjustment to turn on lower.

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 607mm and off at 115mm with some adjustment to turn on lower.

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Automatic - will turn on at 607mm and off at 115mm with some adjustment to turn on lower.