Submersible (Drainage) Pumps

The Baby Battery submersible pumps runs off the DC power provided by a 24V battery, making it ideal for pumping water from boat bilges, general drainage and transfer. Both reliable and efficient, this pump has a duty cycle of 20 minutes, and comes supplied with a fixed handle, hose coupling, 5 metres of PVC power cable and battery clips.

The Baby Battery submersible pumps runs off the DC power provided by a 12V battery. This makes it ideal for pumping water from boat bilges, general drainage and transfer. Both reliable and efficient, this pump has a duty cycle of 20 minutes, and comes supplied with a fixed handle, hose coupling, 5 metres of PVC power cable and battery clips.

The Baby Battery submersible pumps runs off the DC power from provided by a 12V battery making it ideal for pumping water from boat bilges, general drainage and transfer. Both reliable and efficient, this pump has a duty cycle of 20 minutes, and comes supplied with a fixed handle, hose coupling, 5 metres of PVC power cable, battery clips and a float switch for automatic level control.

The Trencher range of submersible 2" drainage pumps that are compact, light and powerful. They are suitable for ground water and water containing sand and silt - maximum solids handling of 7mm.

The Trencher range of submersible 2" drainage pumps that are compact, light and powerful. They are suitable for ground water and water containing sand and silt - maximum solids handling of 7mm.

A versatile, portable, submersible, residue pump for clean water. This pump features the ability to pump down to 1mm, therefore ideal for removing water from flat surfaces such as floors and flat roofs.

The Liberator range of submersible drainage pumps that are compact, light and powerful. They are suitable for ground water and water containing sand and silt - maximum solids handling of 7mm.

This Heavy Duty Submersible Sewage Pump is suitable for draining waste & clean water or sewage containing solid bodies up to 31mm, whilst the float switch automatically turns the pump off when the water level drops.

The SAM 316-130/S submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316 grade cast and pressed stainless steel, it has a pendant type float switch for automatic level control. Fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. Supplied with 10 metres of heavy duty, rubber power cable. The 230v motor is fitted with internal overloads and internal starting capacitors. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together).This model covers most, but not all global seawater conditions.

The Mizar/S (230V) is ideal for the pumping of chemicals which are of a mildly aggressive nature, which would normally corrode lower grade metal or plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and is also suitable for use with light chemicals. This model can pump small soft solids in suspension but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this unit also benefits from a built-in handle and included hose connector. Completing this product is a 316 grade (1.4401) pressed

The Select Brand Arvex/S (230V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316 grade

The Mizar/S (230V) is ideal for the pumping of chemicals which are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this model also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401)

The Mizar/S (110V) is ideal for pumping chemicals that are of a mildly aggressive nature, which would normally corrode the lower grade metal and plastic components found in a traditional pump. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316 grade (1.4401) pressed stainless steel manufacture, to finish off this is a hard wearing and reliable product.

The Mizar/S (110V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this unit also benefits from a built-in handle and included hose connector. Completing this product is a 316 grade (1.4401) pressed

The Arvex/S (400V) is ideal for the pumping of chemicals that are of mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed

The Arvex/S (230V) is ideal for the pumping of chemicals that are of mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension but is not suitable for ponds or water features, but the included power cable is 10 metres allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316-grade (1.4401) pressed

The SAM 316-80/S submersible pump is for pumping seawater, saltwater and chemicals. Constructed from 316-grade cast and pressed stainless steel, it has a pendant type float switch for automatic level control. It also comes fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. Supplied with 10 metres of heavy duty, rubber power cable. The 230V motor is fitted with internal overloads and internal starting capacitors. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together).This model covers most, but not all global seawater

The SA 316-80 submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316-grade cast and pressed stainless steel it is fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. The product is supplied with 10 metres of heavy duty, rubber power cable and the 400V motor is fitted with internal overloads. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together). This model covers most, but not all global seawater conditions.

The SA 316-130 submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316-grade cast and pressed stainless steel it is fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. Supplied with 10 metres of heavy duty, rubber power cable. The 400V motor is fitted with internal overloads. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together).This model covers most, but not all global seawater conditions.

Zipper RTP350 compact 3 in 1 water pump, ideal for mounting over the edge of a water barrel and can transport up to 500 L per hour, even up to a height of 11m, to make it easier for garden owners to water their plants. Features: Powerful 350W motor 3-in-1 pump applicable for dirty water, clear water, and flat water Adjustable holding bow made from aluminium Max delivery flow capacity 2.5 m³/h (2,500 L/h) Integrated filter Flat suction facility (approx. 2mm) Solid and reliable design High quality sturdy plastic case with carrying handle Maximum pump height / depth : 11m / 3m

The GR Blue Pro is a sumbersible pump with high-head, cast iron impeller and cutter and boasts an impressive 69,000 cuts per minute. This pump model is equppied with an intake cutting system of a steel plate and triple-bladed rotary cutter. This system cuts fibres and stringy bodies and assures smooth pump function. Applications Industrial schemes Agriculture / farming Sewage and treatment works Irrigation

The GR Blue Pro is a sumbersible pump with high-head, cast iron impeller and cutter and boasts an impressive 69,000 cuts per minute. This pump model is equppied with an intake cutting system of a steel plate and triple-bladed rotary cutter. This system cuts fibres and stringy bodies and assures smooth pump function. Applications Industrial schemes Agriculture / farming Sewage and treatment works Irrigation

The GR Blue Pro is a sumbersible pump with high-head, cast iron impeller and cutter and boasts an impressive 69,000 cuts per minute. This pump model is equppied with an intake cutting system of a steel plate and triple-bladed rotary cutter. This system cuts fibres and stringy bodies and assures smooth pump function. Applications Industrial schemes Agriculture / farming Sewage and treatment works Irrigation

The GR Blue Pro is a sumbersible pump with high-head, cast iron impeller and cutter and boasts an impressive 69,000 cuts per minute. This pump model is equppied with an intake cutting system of a steel plate and triple-bladed rotary cutter. This system cuts fibres and stringy bodies and assures smooth pump function. Applications Industrial schemes Agriculture / farming Sewage and treatment works Irrigation