Submersible (Drainage) Pumps

Industrial quality submersible pump, with stainless steel drive shaft, chrome plated body and 50mm (2") diameter outlet.

The HSE200A is suitable for pumping both dirty and clean water. It is also ideal for pools, fish pond circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water drainage. The HSE 200A features a robust cast iron base. Includes filter base, outlet connector and 10m of heavy duty HO7RNF cable.

Pump both dirty and clean water with the HSE130A, Great for circulating water in pools & fish ponds* it really comes into its own when pumping ground, rain and flood water, creating waterfalls & fountains in water features, garden irrigation or even emptying waste water from sump pits. Robust build quality with a cast iron base, it has a built in strainer allowing it to pump small solids in suspension. Convenient float switch operated - pump is automatically switched on, then off, as water level rises and falls. *Please note – If used in ponds containing fish and aquatic animals ensure additional protection around the inlet is used

Suitable for pumping both dirty and clean water, the HSE 130 is ideal for pools & fish pond water circulation* and aeration, ground, rain and flood water drainage, creating waterfalls & fountains in water features, garden irrigation and sump pits waste water drainage. Robust build quality with a cast iron base, it has a built in strainer allowing it to pump small solids in suspension.

The HSD.55S is a lightweight and robust single-phase submersible drainage pump, with an agitator and impeller constructed from chromium iron to reduce clogging and increase wear resistance when pumping particulate-contaminated water, sludge and bentonite. The hydraulic design of this pump features a double mechanical seal with an oil lifter, for positive seal lubrication in any operating position, not only that, but the high-performance motor enables long periods of operation while partially submerged. Supplied with a pendant float switch, for automatic operation. Built for use and designed for long life application.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

This domestic submersible pump is ideal for clearing flooded cellars, trenches, flat roofs, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.

This domestic submersible pump is ideal for clearing flooded cellars, trenches, flat roofs, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.

The Einhell clear water pump GE-SP 18 LL Li – Solo offers wireless freedom and a powerful motor. The water pump really comes into its own when clear water needs to be pumped out. It also masters its task in remote locations not connected to the conventional power grid. It is a member of the Power X-Change family, so all batteries in the system series can be used. With its ingenious design, it is equipped with a flexible battery box with integrated cable holder. The long cable connection enables deeper immersion of up to 4 metres. The three-stage switch includes a continuous operation function. A large flow rate of up to 4500 Litres/h is ensured by the powerful motor. In this case, the

The Einhell GE-SP 18 LL Li is a water pump which offers cordless freedom and a powerful motor. It is designed for use with clean, or clear, water - that is, water that is not contaminated by dirt and debris. Part of the Power X-Change system, it can be used with any Power X-Change battery and shares battery compatibility with over 200 cordless tools for the home and garden. Ideal for situations where it is not safe, convenient or feasible to use mains power, the GE-SP 18 LL Li consists of a battery unit connected to the pump itself via a long cable which enables the pump to be immersed down to depths of 4 metres. It has a flow rate of up to 4500 litres per hour and will pump water out until

The Einhell GE-SP 18 LL Li is a water pump which offers cordless freedom and a powerful motor. It is designed for use with clean, or clear, water - that is, water that is not contaminated by dirt and debris. Part of the Power X-Change system, it can be used with any Power X-Change battery and shares battery compatibility with over 200 cordless tools for the home and garden. Ideal for situations where it is not safe, convenient or feasible to use mains power, the GE-SP 18 LL Li consists of a battery unit connected to the pump itself via a long cable which enables the pump to be immersed down to depths of 4 metres. It has a flow rate of up to 4500 litres per hour and will pump water out until

The Einhell GE-SP 18 LL Li is a water pump which offers cordless freedom and a powerful motor. It is designed for use with clean, or clear, water - that is, water that is not contaminated by dirt and debris. Part of the Power X-Change system, it can be used with any Power X-Change battery and shares battery compatibility with over 200 cordless tools for the home and garden. Ideal for situations where it is not safe, convenient or feasible to use mains power, the GE-SP 18 LL Li consists of a battery unit connected to the pump itself via a long cable which enables the pump to be immersed down to depths of 4 metres. It has a flow rate of up to 4500 litres per hour and will pump water out until

The Einhell cordless clean-water pump GE-SP 18 Li-Solo is a powerful member of the high-quality lithium-ion battery-based Power X-Change family. This pump is perfectly suited for the garden, leisure, camping, and anywhere where water needs to be pumped without mains power available. The long cable connection to the battery box allows a greater depth of immersion: Water can be pumped or recirculated independently of the mains power grid - flexible in application and powerful in operation. The powerful motor can pump up to 5,000 litres of clean water per hour. The separate and splash-proof battery box with hook and wall bracket also offers an option to store the cable on the housing for ease

The cordless submersible and rainwater pump GE-PP 18 RB Li is a powerful member of the high-quality lithium-ion-powered Power X-Change family. The pump is designed for a range of applications. Use as a submersible pump with a long cable connection, e.g. in a tank or well, or with the adjustable connecting pipe, e.g. for a rainwater butt: Water your garden without needing a mains socket - flexible in application and powerful in operation. The powerful motor generates a high delivery pressure of more than 2 bar, which means running a lawn sprinkler or a garden sprayer is no problem at all. The extension tube with its convenient mounting bracket and movable water connection with stop valve for

The GE-DP 18/25 LL Li is an all-rounder for pumping out clean or dirty water, and due to its battery powered design it can be conveniently used in a wide variety of locations, whether or not there is a mains power source nearby. It is part of the Power X-Change cordless system and shares battery compatibility with a wide variety of additional tools for the home and garden. The pump is suitable for waste water with particles up to 25mm in size, or for clear water with particles up to 1mm. At 3.3kg, it is easy to transport and features an integrated carry handle. Features & Benefits • Member of the Power X-Change family (requires one 18v battery) • 2-in-1 combi pump: Clean water or