Saws

The Footprint 246 Dovetail Saw is made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from a attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England. Blade Length 200mm (8in). Teeth 20 tpi.

For cutting medium thick materials. Universal toothing, hardpoint teeth for long lasting sharpness . Suitable for rip cutting and cross cutting. Thicker blade for increased stability and precision. Screwed 2-component handle can be used for approximate 45 and 90 marking guide . 7TPI (8 points).

For cutting medium thick materials. Universal toothing, hardpoint teeth for long lasting sharpness. Suitable for rip cutting and cross cutting. Screwed 1-component handle can be used for approximate 45 and 90 marking guide. 7TPI (8 points).

For cutting medium thick materials. Universal toothing, hardpoint teeth for long lasting sharpness. Suitable for rip cutting and cross cutting. Screwed 1-component handle can be used for approximate 45 and 90 marking guide. 7TPI (8 points).

Single cut files to give fine/sharp finish to garden tools. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Self handled with hang hole. Display packed.

The Monument Junior Hacksaw has a finger guard and is supplied with a 32 TPI blade. Ideal for cutting light materials and best suited for smaller general sawing where the workpiece cannot be firmly secured. Size 150mm (6in).

Hooked Trimming Knife Blades - Pack of 5 Blade shape helps prevent damage to materials beneath cutting surface Durable carbon steel replacement blades for heavy-duty utility knives Fits most standard utility knives, and all Stanley knives Supplied in a pack of 5 Please note this is an age restricted item, ID will be required upon collection

Stanley 2-11-921 1992 Heavy Duty Utility Blades (Pack of 10) Features:
- Engineered for general-purpose cutting
- Precision-honed edge for consistent and extended cutting life
- Fits most standard utility knives Specification:
- Blade length: 62mm
- Blade thickness: 0.65mm
- Blade height: 19mm
- Number of Blades: 10

Heavy Duty Blade - Pack of 5, ideal for carpets and vinyl Durable carbon steel replacement blades for heavy-duty utility knives Engineered for general-purpose cutting Precision-honed edge for consistent and extended cutting life Fits most standard utility knives, and all Stanley knives Supplied in a pack of 5 Please note this is an age restricted item, ID will be required upon collection

This Monument Hacksaw has a die-cast aluminium handle and square section tubular steel frame, which combine to give a lightweight tool with great tensile strength.Adjusts to give 45° angle for flush cutting, this hacksaw is supplied with a 24tpi 300mm (12 in) blade.Additional Information:• Type: Hacksaw• TPI: 24

Designed for cutting plasterboard, chipboard or hardboard. Double bevel hardened teeth and soft grip handle for user comfort. Display packed.

Plated steel frame with finger guard. Supplied with blade. Display packed.

The BlueSpot 150mm (6") Aluminium Junior Hacksaw is manufactured from aluminium and features a hardened and tempered carbon steel blade for increased durability and cutting power. Features an ergonomic plastic handle for increased comfort.

Spear & Jackson B9814 Toolbox Saw Predator 14 Inch 14PPI The Spear & Jackson B9814 is a fast cutting saw for use along and across the grain. Its fleam tooth configuration cuts on both the forward and reverse stroke making it ideal for cutting doweling, mouldings, skirting and more. It is extremely long-lasting and durable thanks top its hardened and tempered carbon steel blade. Features:
- A fine cut for smooth cutting with push/pull action
- Rigid Blade - thicker 0.91mm minimises whip and vibration
- Ideal for cutting pelmets, moulding, doweling, coving, architraves and skirting
- Comfortable handle - Suregrip® soft-feel ergonomic grip and finger guide for accuracy, also incorporating a us…

Manufactured from grey iron casting finished with a hard wearing durable epoxy lacquer coating, these spokeshaves are designed for cutting various shapes into wood. Each product offers fully adjustable cutter alignment and depth of cut. Suitable for rapid stock removal. Available with either a round or flat base for use on concave or convex surfaces respectively. Features and Benefits 12-151 has flat base for flat and convex surfaces 12-152 has round base for concave surfaces Each spokeshave body is manufactured from die cast iron for ultimate durability The blade is constructed from hardened and ground carbon steel for a clean and accurate cut Fully adjustable for depth of cut and alignment …

Small block plane suitable mainly for model makers 25 cutter angle. 35mm cutter width. Block Planes Suitable for end grain work or any application where single handed operation is required. The plane bodies are manufactured from fine grey iron ground and polished to a high quality finish. The cutter is set at a low angle this ensures vibration is kept to a minimum producing good results when used on plastic laminates and other man made materials. All have adjustable cutter alignment and depth of cut.

Monument pack of 10 Junior hacksaw blades, for use with the Monument 2000 Junior hacksaw. They are 150mm long and 32tpi. Supplied in a display pack of 10. Length 150mm. Width 6mm. Thickness .38mm. TPI 32.

General purpose cutting blades with pinned ends. Will fit all junior hacksaw frames. Packed ten blades to display card.

General purpose cutting blades with pinned ends. Will fit all junior hacksaw frames. Packed ten blades to display card.

High Tension - saw will tension up to 30,000 PSI, Easily Adjust Tension, Ergonomic Grip - front handle grip reduces fatigue in continuous cutting applications, Multi-Purpose - mount blade at 45 degrees for flush cutting applications.

Stanley 0-11-911 Standard Knife Blades (1991) - (Pack of 5) The Stanley 0-11-911 is a Pack of 5 Blades. The 1991 is Stanley's original blade - an every-day, general purpose utility blade and fits all standard Stanley utility knives and most other knives. The 1991 blade is suitable for cutting most light sheet materials, paper and cardboard. Features:
- Available as a pack of 5pcs, a pack of 10pcs, or a pack of 100pcs
- Stanley's original blade - the 1991 is a general-purpose blade
- Fits all standard Stanley utility knives and most other knives
- Hardened and tempered
- Suitable for cutting most light sheet materials Specification:
- Pack of 5…

Stanley 0-11-800U Tungsten Carbide Knife Blades (Pack of 5) The Stanley Tungsten Carbide Knife Blades stay sharper with a more durable cutting edge which means less time spent changing blades. The Blade stays sharper 10 times longer, based on average values compared with Stanley 1992 blades. Features:
- Steel body allows flexibility to help prevent breaking
- Laser deposited carbide lines edge delivering a long lasting blade for the job site [https://youtu.be/Lci0nCOPSXY] Specification:
- Weight: 0.1kg

Stanley 0-10-788 DynaGrip Instant Change Knife with 3 Blades Stanley DynaGrip instant change knife 0 10 788 is a solid well made knife as you would expect from Stanley. With the ability to change blades instantly without the need for any other tools. It sits easily in the hand with an ergonomicly designed handle. Features:
- Quick and Safe Blade Change.
- Push button front loading blade.
- No tools needed to change blade.
- Retractable Blade Slider
- Interlock Nose
- Built in Thumb Grip
- Integrated String Cutting Feature (no need to expose the blade)
- Bi-material side panels for better grip.
- Ergonomic design for greater comfort, control and balance
- Cast metal body …

The Fein 35222967100 Set is compatible with the popular Starlock mounting system The Fein 35222967100 contains 3 different E-Cut plunge-cut saw blades for sawing in PVC, wood and metal. Compatible with all FEIN Multitools and many popular Multitool brands with Starlock mounting systems such as Fein, Bosch, Festool, Milwaukee and Makita and more. Contains: E-Cut Universal 223 - PVC, Wood and Metal 44mm wide E-Cut Long Life 228 - PVC, Wood and Metal 65mm wide E-Cut Long Life 160 - PVC, Wood and Metal 35mm wide