Other for Construction

The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute.The Moore & Wright ELS Engineer's Levels have the following specification: Length: 165mm (6.5in).Width: 34mm (1.34in).Height: 46mm (1.81in).Resolution: 0.3mm per metre (0.0035in per foot).PTDMAWELS

The Moore & Wright MW279-01A Micrometer Stand is designed for micrometers up to 100mm (4in). It has a painted cast iron base with plastic covered clamping jaws and the angle of the jaws can be adjusted.PTDMAW27901A

The Moore & Wright MW200-01 Analogue External Micrometer is a precision measuring instrument designed for accurate external dimension measurements up to 25mm. This professional-grade micrometer features a robust hammertone finish frame with an insulated grip to reduce heat transfer during use, ensuring measurement accuracy is not compromised by thermal expansion. The satin chrome scale provides clear, easy-to-read graduations whilst the tungsten carbide measuring faces deliver exceptional wear resistance for long-term reliability. Built to DIN 863/1 standards, this micrometer offers a resolution of 0.01mm with an accuracy of 0.004mm, making it ideal for precision engineering, quality control …

The Moore & Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in.Resolution: 0.001mm/.00005in.PTDMAW20001DBL

The Moore & Wright MW521-01 Combination Set is supplied with three measuring heads (square protractor and centre) which can be attached to the stainless-steel ruler allowing versatile measurements and marking on various types of workpieces.The stainless-steel rule has engraved graduations; one side metric one side imperial with hardened and ground slide ways. Range: 180°.Length: 300mm (12in).PTDMAW52101

Features Cast Aluminium Handle With Increased Knuckle Room Product Description2 X Interchangeable Brick Jointer 4 Size

Am-Tech cement trowel Soft grip for easy use Polished steel blade Colour: Grey Size: 400m x 100mm

DURABLE AND COMFORTABLE TO USE: This 130mm (5") pointing trowel has a hardened and tempered steel blade with a soft grip for added comfort and...

AmtechG1610280mm(11")NotchedFloatTrowelwithWoodenHandle

Amtech G1610 280mm (11") Notched float trowel with wooden handle

AmtechG1855LeafandSquareProfilingToolSet,TriangularandSquareBlades,PlasterersTrowel,SmallTool,Double-Ended2-Piece

Am-Tech brick line blocks & line builders Easy line adjustment & storage Polyethylene material L-shaped plastic block Colour: Red Size: 18m

The perfect tool for any amateur or professional decorator. Features: Hardened and tempered carbon steel blade With comfortable soft grip handle...

Both Triangular And Square Blades High Quality Stainless Steel Blades Used For Pointing , Cementing Any Small Scale Brickwork And ForFilling &...

RUBBER FLOAT BASE: Spreads grout evenly for smooth, consistent joints. ERGONOMIC HANDLE: Offers comfort and control during extended grouting.

Amtech - Tile Grout Float for Even Spreading and Smooth Finish, Home DIY, Dual-Edged Design, Durable with High-Density Foam Pad and Aluminium Plate,

Amtech - Tile Grout Float for Even Spreading and Smooth Finish, Home DIY, Dual-Edged Design, Durable with High-Density Foam Pad and Aluminium Plate,

Amtech - Tile Grout Float for Even Spreading and Smooth Finish, Home DIY, Dual-Edged Design, Durable with High-Density Foam Pad and Aluminium Plate,

Bahco replaceable double-edged blades to fit Bahco 625 650 and 665 scrapers. These carbide-edged blades last up to 50x longer than conventional steel blades. They smooth and remove paint glue varnish and rust without the need for heat. The blades have convex ground edges to reduce the risk of scratching surfaces and cut on both the pull and push strokes. Blade Length: 65mThe mini blade cuts on flat and point for intricate mouldings and detail work. Blade Width: 50 mm /2in.To fit: 440 / 650 only.PTDBAH442

The Bahco 449 Scraper Blade cuts on flat and point for intricate mouldings and detail work. Convex ground edges to reduce the risk of scratching surfaces. Fits the Bahco 448 and 625 Scraper. Blade Width: 25mmPTDBAH449

Bahco replaceable double-edged blades to fit Bahco 625 650 and 665 scrapers. These carbide-edged blades last up to 50x longer than conventional steel blades. They smooth and remove paint glue varnish and rust without the need for heat. The blades have convex ground edges to reduce the risk of scratching surfaces and cut on both the pull and push strokes. Blade Length: 65mBlade Width: 62mm /2.1/2in.PTDBAH451

Bahco Paint scraper developed according to the scientific ERGO™ process. This scraper is specially designed for precision work such as scraping windows moulding and narrow corners. The two-component handle provides ample space to scrape with both hands better grip and excellent working comfort it as a narrow front for a precision thumbgrip. It is supplied with Bahco 449 25mm triangular blade and is also suitable to be used with 625-round 625-drop and 625-pear blades. Also supplied with a holster with integrated clip for convenient storage in a pocket or on a belt.Blade Length: 25mmWeight: 150gPTDBAH625

Bahco drop shape blade to fit the 625 scraper. These blades are made of cemented carbide and can last up to 50 x longer than conventional steel blades. They have superior sharpness for scraping on wood metal or concrete.They can be turned 360° in the handle to find different radii or sharp points and are used for scraping on windows frames and mouldings with different inverted radii. The outer diameter on round section is 17mm (2/3 inch).Weight: 3gPTDBAH625DROP

Bahco round blade to fit the 625 scraper. These blades are made from cemented carbide which can last up to 50 x longer than conventional steel blades. They have superior sharpness for scraping on wood metal or concrete.The blade can be turned 360° in the handle to find different radii or sharp points and has an outer diameter on the round section of 17mm (2/3 inch). Used for scraping on windows frames and mouldings with different inverted radii. Weight: 3gPTDBAH625ROUND