Power Tool Accessories

� Pair of 700mm guide rails � Can be joined together or to existing rails with the supplied connector clip � Fitted with anti-slip grips � Designed to replace or add length to the rails supplied with Draper 1200W Plunge Saw (Stock No. 57341)These two 700mm guide rails, fitted with anti-slip grips, can be used for short cuts or can be joined with the included connector clip for longer cuts. Designed to replace or add length to the rails supplied with Draper 1200W Plunge Saw (Stock No. 57341). 1 x Guide Rails for Draper Plunge Saw, 700mm (Pair)

Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.

Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.

Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.

Polishing sponges for use with hook and loop backing pads. Designed for polishing, cutting and restoring paintwork.

Polishing sponges for use with hook and loop backing pads. Designed for polishing, cutting and restoring paintwork.

Polishing sponges fitted with a backing pad for use with M14 thread arbors. Designed for polishing, cutting and restoring paintwork.

For use with hand held electric drills with collar diameters of 43mm or 38mm with supplied reducing bush. Solid column bar and sturdy base with slots for fitting machine vice. Features depth adjustment scale and stop. Display carton.

Black finish steel blades hardened and tempered. Ramin handles with sanded finish. Sharpening stone is manufactured from Aluminium oxide. Display packed.

Solid stamped beech for greater strength. For use with Draper Biscuit Jointer Stock No.75303 and other manufacturers similar machines. Packed in polybags of 100 pieces (approx.) with header card. *Assorted biscuits packed in the approximate numbers 0=25, 10=25 and 20=50.

Solid stamped beech for greater strength. For use with Draper Biscuit Jointer Stock No.75303 and other manufacturers similar machines. Packed in polybags of 100 pieces (approx.) with header card. *Assorted biscuits packed in the approximate numbers 0=25, 10=25 and 20=50.

This bandsaw stand is designed for use with Stock No. 84715 - 340mm Bandsaw (1100W) and would be suitable as a stand for many other similar machines. Manufactured from sheet steel. Supplied with fixings for assembly and fixing to the saw.1 x Bandsaw Stand for Stock No. 84715

Redirects Sparks – Increased comfort from debris and sparks during cutting, grinding, sanding and polishing applications
Easy to Use Design – Spring friction design allows for quick adjustment and accessibility to accessory
Compact Size– Does not interfere with the work piece as it redirects debris and sparks
Attaches onto a rotary tool in place of its nose piece for quick and easy installation

Offers enhanced grip and comfort for detailed applications Provides optimal tool control when precision is required Compatible with Dremel tool models: 100, 200, 3000, 4000, 4300, 7760, 8220, 8240, 8250 and 8260 Repositions the weight of the tool into the palm of your hand for a balanced feel and less fatigue Attaches onto a rotary tool in place of its nose piece for quick and easy installation

A flexible heat resistant mat that can be used to catch excessive glue and to create decorative glue design patterns: allow glue to cool and peel it off easily. The pad is suitable for all types of melted glue. Size: 20cm x 20cm.

To be used on Dremel model 920 and 930 (low-temperature). Can be used for a variety of decorations on paper, carton, glass, textile, wood, plastics, etc. Colour sticks can also be used for sealing and stamp decorations.Specifications:Length: 100 mm Diameter: 7 mm Operating temperature: 105-140 °CPack of 12

Saw blade for longer cut offs, which are normally limited by the throat depth of the tool. In terms of technical specifications, this blade is identical to the MS51 General Purpose blade, however, its top and bottom parts are 90 degrees twisted. This twist allows a lateral material feed either from left or right, resulting in technically infinite cuts. Technical specifications: Length: 100mm Cutting depth: 12mm. Teeth per centimeter: 6 Blade width: 0.4mm. Blade depth:2.5mm.

Saw blade for straight and large diameter curved cuts in wooden and plastic materials. This blade has 6 teeth per centimeter ensuring a good balance between speed and precision. Technical specifications: Length: 100mm Cutting depth: 18mm. Teeth per centimeter: 6 Blade width: 0.4mm. Blade depth:2.5mm.

Saw blade for detailed cuts in wooden materials. This blade has 7 teeth per centimeter ensuring the finest cutting results. Technical specifications: Length: 100mm Cutting depth: 12mm. Teeth per centimeter: 7 Blade width: 0.2mm. Blade depth:1.9mm.

Saw blade for cutting soft sheet metal. This blade has 10 teeth per centimeter ensuring excellent cuts. Technical specifications: Length: 100mm Cutting depth: 3mm. Teeth per centimeter: 10 Blade width: 0.2mm. Blade depth:1.9mm.

To be used on Dremel model 910 (165). Glues a variety of materials, such as wood, plastics, ceramics and textiles. Diameter: 11mm. Length: 100mm. Working Temperature: 165 - 195C.

To be used on Dremel model 910 (165). Glues a variety of materials, such as wood, plastics, ceramics and textiles. Diameter: 7mm Length: 100mm. Working Temperature: 165 - 195C.

To be used on Dremel model 920 (105) and 930 (low-temperature - 165). Glues a variety of heat sensitive materials, such as paper, carton, delicate textiles. Diameter:7mm. Length: 100mm Working Temperature: 105 - 140C

To be used with Dremel glue gun model 940 (195 C) to glue wooden materials. Length: 100 mm. Diameter: 11 mm. Operating temperature: 165-195 C