Power Tool Accessories

Work in small spaces with 12 senses to choose from and the normal functions of your Dremel multi-tool.The attachment´s 90° set head offers excellent visibility to the surface while maintaining control of the multi-tool.Just bolt it onto your Dremel multitool to work faster.Its durable, lightweight design offers a multi-tool-like feel while allowing you to work in hard-to-reach spaces.Contents:1 angle head, 1 impeller cover and 1 manual/quick start guide.Length:8.5:cm.Width:3:in.Depth:6:in.SOL Date:01.10.2020:Retired:no:Reasons to buy (online dealer):Work in small spaces with 12 senses to choose from and the normal functions of your Dremel multitool:Product box length:9:cm.Product box height:12:cm.Pr…

Features:- Piloted Beading Bit.- A decorative bit for detailed edges.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 9,5 Mm- Working length: 4,8 mm- Accessory Length: 37,0 Mm- Usage: Piloted Beading- Width: 5,0 Mm- Length: 5,0 Mm- Height: 37 Mm- Maximum Rpm: 35.000 1/Min

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• V-Groove Bit• For sign word and lettering Specifications:Shank diameter: 3,2 mm Working diameter: 6,4 mm Usage: V-GrooveMaximum RPM: 35.000 1/min

Straight Bits. General purpose routing or grooving.Features & Benefits:• Straight Bits • General purpose routing or grooving Technical specifications:Shank diameter: 3,2 mm Working diameter: 4,8 mm Usage: StraightMaximum RPM: 35.000 1/min

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

For Routing, Mounting Slots In Picture Frames Or Anything That Needs To Be Hung.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 8 Mm- Working Length: 2,7 Mm- Usage: Keyhole Router Bit- Maximum Rpm: 35.000 1/Min

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.Specifications:Shank diameter: 2,4 mmWorking diameter: 2,0 mmPack of 2

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, leather, ceramic tile. Shank Diameter: 3.2mm. working Diameter: 7.8mm. Accessory length: 40mm. Maximum speed: 35,000rpm.

Very tough bit, for material removal of fiberglass, wood or ceramic tile.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 19 Mm- Accessory Length: 45 Mm- Width: 19 Mm- Length: 19 Mm- Height: 45 Mm- Maximum Rpm: 35.000 1/Min

Mandrel for Dremel EZ SpeedClic accessories. Specifications • Shank diameter - 3.2mm • Maximum RPM: 35.000 1/min

9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min

Stapler/Nailer Accessories - The original Einhell nails 32mm are a suitable accessory or replacement part for the Einhell stapler and nailer.
Suitable for - The nails are specially designed to fit the Einhell cordless nailer/stapler TE-CN 18 Li and for the Einhell cordless nailer FIXETTO 18/50 N or other suitable devices.
Application - With the nails, e.g. e.g. floor boards can be easily nailed. Other woods or similar materials can also be fixed with the nails.
Magazine change - The magazines of the cordless nailer/stapler have a capacity of max. 100 nails At the touch of a button, the magazine can be opened and refilled.
PACKAGE CONTENTS - Comes with 3,000 pieces in one pack.…

Suitable for Einhell angle grinders with an M14 socket
The quick release nut can be used for all cutting discs with a diameter of 115 or 125 mm.
With the quick-lock system, the cutting discs can be easily changed without tools.
Brand: kwb by Einhell

Original Einhell clips: 3,000 pieces
Clip dimensions: width 5.7 mm, height 19 mm
For external use only
Matching accessories for the Einhell cordless nailer/stapler TE-CN 18 Li-Solo
Ideal product for craft projects
Easy and intuitive to use,Easy to store
High quality product

Polishing surfaces to a mirror polish. No lint build-up on the polishing rings. Consisting of: 1 sisal polishing ring (6 37 23 011 01 4), 2 rigid polishing ring cloths (6 37 23 013 01 1), 2 soft polishing ring cloths (6 37 23 014 01 9), 1 brush paste (6 37 26 027 01 0), 1 pre-polishing paste (6 37 26 028 01 0), 1 colouring paste (6 37 26 029 01 0), 1 work arbour (6 38 03 027 03 8), 1 pin-type face spanner (6 29 10 022 00 2), 1 open-ended spanner 19 x 22 (6 29 04 003 00 0)

• QuickIN-adaptor• Output M18 x 6 P 1.5

Quantity 1 Piece

For gentle sanding along windows, frames and fillings
Saves effort to rework
For protecting the sanding shoe and workpiece
Excellent for up-close sanding
Secure and non-kicking grinding

Original Festool quality
Package Weight: 3.6 ounces
Power source type: Hand-operated
Festool Hinge Location Cutter KVB-HW D15 CE 203165

Festool OSC-TA Depth Stop for Vecturo Cordless Oscillator Multi Tool
Model Number: 203255
From Festool
Product's Model Number : 203255