Power Tool Accessories

One click and you're done. The Festool HK 55, HKC 55 and HK 85 circular saws can easily be connected to the FSK cross-cutting guide rails, which are available in three different lengths of 250 mm, 420 mm or 670 mm. In just a few steps, this produces a portable and easy-to-use compound mitre saw system for accurate and precisely angled cutting. Features & Benefits • Compatible with Festool HK 55, HKC 55 and HK 85 circular saws • The machine can be easily connected to the rail to form a single unit, by means of a quick fastener • Efficient cross cuts due to quick placement on the workpiece • Right-angled cross cuts with repeat accuracy thanks to precision guide • Retract …

Padded storage bag for the Festool FSK 250 and FSK 420 cross cutting guide rails. A zip fastener keeps the contents secure and the carry handle provides a simple transport solution to and from the work site. Features & Benefits • Padded bag protects the rail from dirt and damage, increasing its service life • Made from robust and high quality fabric • Zip fasener provides quick access and keeps contents secure during transport • Suitable for the FSK 250 (250mm) or FSK 420 (420mm) cross cutting guide rails Specifications • Festool Part Number: 200160

Invented and perfected by Festool: The guide rail with adhesive pads. For straight and precise cuts when carrying out horizontal work on floors or work surfaces, as well as for applications on walls. The adhesive pads make it easy for users to secure the guide rail on different surfaces. The adhesive pads are quick and easy to install in the guide rail cut-outs. Align the guide rail, press down the adhesive pads – and you're ready to start work. The adhesive pads can be used to secure the guide rail to work surfaces, floors and walls. This means that straight cuts can be made in any position. Even on delicate surfaces, the adhesive pads are easy to remove without leaving unwanted residues an…

Designed for the Festool guide rail system, the FS-KS enables angled cuts between 0 and 180° to be undertaken on the rail. Features & Benefits• Angles can be transferred directly from the wall/workpiece to the guide rail • No measurements with an additional protractor are necessary • The angle size can be set on the scale • Installation on the guide rail can take place via the groove for accessories

The FS-OF 1000 adaptor enables OF 900, OF 1000 & OF 1010 routers to be used with the Festool guide rail system. Guide rail adaptor only; does not include rods. Compatible with the following Festool machines • OF 900 • OF 1000 • OF 1010

The FS-OF 1400 Guide Rail Adaptor enables you to use the Festool OF 1400 router on a guide rail. It is fitted with a fine adjustment control.Features & Benefits• Guide Rail Adaptor for the Festool OF 1400 router • Fine Adjustment control • Compatible with the Festool guide rail systemContents• FS-OF 1400 Guide Rail Adaptor only • Guide rods not included

Set of two parallel guides for mounting Festool guide rails onto the workpiece. Specifiations • Max. workpiece width: 650.00mmFeatures & Benefits• For sawing along the width • For fixed cuts, can be re-set using the scale and end stop • Mounts onto the guide rail without the use of toolsContents• Side Fences (x2) • Stop ruler with additional clamp • Adjustable stop

Extensions for use with the Festool FS-PA Guide Rail Side Fence. Specifications • Max. workpiece width: 195.00 mmContents• Stop Ruler • Bridge • Scale

For clamping and positioning the Festool guide rails FS and FS/2 qty. in pack 1 Pair Includes:- Clamping jaws, fixed jaws

Replacement splinterguard for guide railsLength - 1400mm

The two connecting pieces allow users to connect two guide rails so that they are straight and stable. The self-aligning function makes it quick and convenient to connect the guide rails. The connecting pieces are compatible with all Festool guide rails. They ensure precise cuts over the entire length of two or more connected guide rails. Compatible with all Festool guide rails.Features & Benefits• Self-aligning for a straight connection, meaning that precise results can be achieved • Two connecting pieces for stably connecting two guide rails for long workpieces • The laser engraving ensures that the two connecting pieces are used in the correct order • With a self-aligning …

90°. No more. No less. The aluminium stop milled from a single piece guarantees precise and reproducible perpendicular cuts without any readjustments. Thanks to the quick-change system, the angle stop is attached to the guide rail in an instant and, in combination with the portable circular saw, saw table and work bench, turns into the mobile panel saw. • CNC-milled aluminium stop made from a single piece for precise and reproducible 90° cuts • Easy to attach and completely self-aligning • Long contact edge for easy aligning with all workpiece edges • Grooves on the front and rear enable the guide rail clamps to be attached • For precise sheet cutting when using a gu…

The angle stop for the Festool guide rail system – for precise and fast angled cuts. Angles of -60° to +60° can be set with repeat accuracy and high precision. The angle stop therefore offers a wide range of applications and full flexibility. Thanks to the quick-clamping lever, the angle stop is attached to the guide rail in an instant. Specifications • Angular range: -60° to +60°Features & Benefits• High-quality design for making precise angled cuts from -60° to +60° • Quick and easy to connect to the guide rail using the quick-clamping lever – and completely self-aligning • Long contact edge and viewing window for easy aligning with the workpiece edge • Addition…

Parallel side fence FS-PA, guide extension FS-PA-VL
Power source type: battery powered
Package Dimensions: 39.6 L x 11.2 H x 29.6 W (cm)
Model number: 577041

2 piece clamp set designed for insertion into the lower groove of plunge saw guide rails, eliminating any chance of movement while the saw is in operation. Specifications • Clamping Width: 120mmFeatures & Benefits• Screw type fastening • Secure attachment with the MFT 3 • The form of the clamp is matched to the guide rail groove and the profile of the MFT and the PRECISIOContents• 2 Clamps

Suitable for all Festool cordless drills with a FastFix interface, the HD D18 CE FastFix Hook Driver enables you to drive screw hooks into a work surface with your drill. Specifications • Diameter: 18mmFeatures & Benefits• CENTROTEC interface • Designed for fast and easy insertion of screw hooks

Replacement cartridge for the Festool TKS 80 EBS SawStop table saw. Contains the central element of the TKS 80 SawStop technology. Specifications • Part No: 575851

LA-DF 500/700 Trim Stop. Designed for strip material with widths between 22 and 70 mm. Suitable for use with the DF 500 and DF 700.Features & Benefits• Enables the routing of narrow strip material between 22- 70 mm wide • Ideal for panel and frame joints

Festool for sensitive surfaces Suitable for tool types: PS, PSC, PSB, PSBC 400

Attaches tool-free to jigsaw
For use when cutting metals and metal-like materials
Protects base from burrs while cutting metal
Works with all Festool Carvex Jigsaws

LA TKS 80 Stopper for the Festool TKS 80 EBS SawStop table saw. Specifications • Part No: 575826Features & Benefits• With fine adjuster for precise rip cuts • Front operating lever • Clamp for secure mounting • Moveable stop profile

Festool MPA 11010 High Gloss Polishing Agent makes polishing easy, ideally suited to different kinds of polishing work it guarantees top results with minimum effort in combination with the appropriate polishing pad leaving a simple finish on the surface. This polishing agent is water based and does not contain any silicone. Polishing pads sold separately. Features & Benefits • Extra fine sanding performance for removing micro scratches and swirl marks • Water-based • Does not contain silicone • Perfect deep shine • Guarantee optimum results in combination with the appropriate pad Specifications • Volume: 0.5L • Type: Plastic Bottle

Festool MPA 9010 High Speed Gloss Polishing Agent makes polishing easy, ideally suited to different kinds of polishing work it guarantees top results with minimum effort in combination with the appropriate polishing pad. This polishing agent is water based and does not contain any silicone perfect for cleaning and removing signs of wear in old paint and produces a high gloss finish. Polishing pads sold separately. Features & Benefits • Water-based • Does not contain silicone • Perfect in combination with a blue polishing pad • Suitable for all painted surfaces • Ideal for touching up • Excellent wipe-down performance Specifications • Volume: 0.5L

Featuring high-quality carbide-tipped teeth and a specialized tooth geometry, the Festool Panther Wood Cutting Circular Saw Blade ensures efficient cutting and extended blade life. Its innovative design minimizes heat build-up and friction, resulting in smoother cuts and reduced wear on the blade, even when cutting through dense hardwoods. Available in a range of sizes and tooth configurations, you can choose the perfect blade to suit your specific woodworking needs. From rip cuts to crosscuts, this saw blade delivers consistent results, making it ideal for a wide range of applications. Main Applications • Suitable for hardwood and softwood • Splitting boards and other solid wood materials …