Power Tool Accessories

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• Piloted Beading Bit • A decorative bit for detailed edges SpecificationsShank diameter: 3,2 mm Working diameter: 9,5 mm Usage: Piloted Beading

Features and Benefits• Piloted Corner Rounding Bit• Rounding over edges and corners SpecificationsShank diameter: 3,2 mm Working diameter: 9,5 mm Usage: Corner Rounding

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• V-Groove Bit• For sign word and lettering SpecificationsShank diameter: 3,2 mm Working diameter: 6,4 mm Usage: V-GrooveMaximum RPM: 35.000 1/min

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• Straight Bits • General purpose routing or grooving SpecificationsShank diameter: 3,2 mm Working diameter: 3,2 mm Usage: StraightMaximum RPM: 35.000 1/min

Straight Bits. General purpose routing or grooving.Features and Benefits• Straight Bits • General purpose routing or grooving Technical specifications:Shank diameter: 3,2 mm Working diameter: 4,8 mm Usage: StraightMaximum RPM: 35.000 1/min

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features:• Straight Bits• General purpose routing or groovingSpecificationsShank diameter: 3,2 mm Working diameter: 6,4 mm Usage: StraightMaximum RPM: 35.000 1/min

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel Router Attachment 335 or Shaper/Router Table 231.Features and Benefits• Keyhole router bit • For routing, mounting slots in picture frames or anything that needs to be hungSpecificationsShank diameter: 3,2 mm Working diameter: 8,0 mm Usage: Keyhole router bit

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.SpecificationsShank diameter: 2,4 mmWorking diameter: 2,0 mmPack of 2

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 19,0 mmMaximum RPM: 35.000 1/min

Milling Accessory

Mandrel for Dremel EZ SpeedClic accessories. Specifications • Shank diameter - 3.2mm • Maximum RPM: 35.000 1/min

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.Technical specifications:Shank diameter: 3,2 mmWorking diameter: 3,2 mmMaximum RPM: 30.000 1/min

Suitable for use with electric nail guns, including the Einhell TE-CN 18 Li 18v Cordless Nailer and Stapler. Specifications • Nail Gauge: 18 Gauge • Length: 32mm • Pack Quantity: 3000 • Pack Weight: 790g Features & Benefits • Genuine Einhell brad nails • Suitable for the TE-CN 18 Li • 32mm Length Contents • Pack of 3000

Angle Grinder Accessories - The original Einhell quick-release nut M14 is a suitable accessory or replacement part for Einhell cordless or electric angle grinders.
FITS - The 17.5mm thick quick release nut is suitable for all Einhell angle grinders, whether battery or cable operated, with an M14 spindle thread.
Disc change - Cutting and grinding discs with a diameter of 115 - 125 mm can be changed quickly and safely thanks to the metal quick-release nut.
TOOL-FREE CHANGE - Once attached to a Einhell angle grinder, no end hole wrench is needed to change the separating letters.
Use - With the help of the quick-release nut, also quick-fix groove, and the quick-lock system, the cutting discs …

Suitable for use with electric staplers, including the Einhell TE-CN 18 Li 18v Cordless Nailer and Stapler. Specifications • Length: 19mm • Width: 5.7mm • Pack Quantity: 3000 • Pack Weight: 790g Features and Benefits • Genuine Einhell staples • Suitable for the TE-CN 18 Li • 19mm Length Contents • Pack of 3000

Polishing surfaces to a mirror polish. No lint build-up on the polishing rings. Consisting of: 1 sisal polishing ring (6 37 23 011 01 4), 2 rigid polishing ring cloths (6 37 23 013 01 1), 2 soft polishing ring cloths (6 37 23 014 01 9), 1 brush paste (6 37 26 027 01 0), 1 pre-polishing paste (6 37 26 028 01 0), 1 colouring paste (6 37 26 029 01 0), 1 work arbour (6 38 03 027 03 8), 1 pin-type face spanner (6 29 10 022 00 2), 1 open-ended spanner 19 x 22 (6 29 04 003 00 0)

QUICK AND EASY - This is compatible with all Fein tools that have the QuickIn and QuickIn Max system which allows users to change accessories in under 3 seconds with a patented, tool-free, Fein rapid-clamping system
FEIN QuickIN accessories such as drill chuck, bit holder or socket adapter can be attached to the angle shift
The Fein Tool Difference - For over 150 years, Fein has been a world-leading power tool manufacturer. Our tools are designed to last longer and work better, so one can get the job done right

• QuickIN-adaptor• Output M18 x 6 P 1.5

Quantity 1 Piece

Quick-action chucks