Power Tool Accessories

SDS-plus adapter for CENTROTEC tool chuck
SDS Plus holder
for holding a CENTROTEC tool chuck

Prevents splintering qty. in pack 5 pieces

SP-TS 55/5 splinter guards for TS 55 & TS 75 plunge saws.Features & Benefits• For low-splinter cuts to the right of the saw blade • Can be used with or without guide railContents• 5 Splinter Guards

Improved dust channel design further enhances dust extraction efficiency for a cleaner work environment
Easy-to-read dual-depth scale indicates depth settings for cuts on or off the guide rail (self-adhering imperial scale included)
Greater bevelling range of -1 degrees to 47 degree with simple detent-override and positive stops at 0 and 45 degrees

Description:Processing modern paint systemsRecommended for VOC clear coatsProcessing hard sublayersProcessing plastic, mineral materials, acrylicSpecifications:Grit: P120qty. in pack: 10 piece(s)

Description:Processing modern paint systemsRecommended for VOC clear coatsProcessing hard sublayersProcessing plastic, mineral materials, acrylicSpecifications:Grit: P80qty. in pack: 10 piece(s)

Can be used as a kickback stop or as a guide stop if positioned in front of the saw on FS/2 guide rails. Compatible with models TS 55, TS 55 R, TSC 55, TS 75, HKC 55, HK 55, ATF 55, AP 55, AT 65, AP 65 & AP 85.

ST TKS 80 Sliding Table for the Festool TKS 80 SawStop table saw. Specifications • Part No: 575827Features & Benefits• Sliding table with plastic rollers • Allows you to comfortably guide workpieces for cross-cuts • Suitable for cross-cutting with a cutting width up to 920mm • Four plastic rollers ensure that the sliding table moves smoothly • Can be installed in two positions for a large work area

The Festool AB-CT26/36-ASA/SB support is designed to stabilise the handlebar when a boom arm is attached to a CT 26 or CT 36 dust extractor.

qty. in pack 5 pieces

Festool's diamond saw blade saws all cement-bonded and gypsum-bonded chipboard and fibreboard quickly and with a high cutting performance. When used together with the Festool TS 55 F and TSC 55 K plunge-cut saws, it is the ideal solution for precise, efficient work. Recommended For: TS 55 FEBQ Specifications • Blade Diameter: 160mm • Bore: 20mm • Teeth: 4 • Cutting Width: 1.80 mm • Standard Blade Thickness: 1.20 mm • Tooth Shape: FFeatures & Benefits• Especially recommended for the TS 55 FEBQ • High cutting performance when sawing cement-bonded and gypsum-bonded chipboard and fibreboard • The saw blade is fitted with high-quality PCD (polycrystalline …

This Festool fine cutting circular saw blade for wood is especially designed for the TS55 FEBQ plunge saw and is made from high quality steel with fine grain carbide teeth. Recommended For: TS55 FEBQ Specifications • Blade Diameter: 160mm • Bore: 20mm • Teeth: 42 • Cutting Width: 1.80 mm • Standard Blade Thickness: 1.20 mm • Chip Angle: 10.00° • Relief Angle: 15.00° • Tooth Shape: WDFeatures & Benefits• Especially recommended for the TS55 FEBQ • The fine-cut saw blade for clean and splinter-free cuts • Saw teeth made of high-quality metal – for optimum saw progress and perfect cuts • Cutting angle and tooth shape are adapted to…

This Festool laminate / HPL cutting circular saw blade is especially designed for the TS55 F plunge saw and is made from high quality steel with fine grain carbide teeth. Recommended For: TSS 55 F Specifications • Blade Diameter: 160mm • Bore: 20mm • Teeth: 52 • Cutting Width: 1.80 mm • Standard Blade Thickness: 1.20 mm • Chip Angle: -5.00° • Relief Angle: 20.00° • Tooth Shape: TFFeatures & Benefits• The systematic solution for work with laminate and boards bonded with melamine resin • Saw teeth made of high-quality metal – for optimum saw progress and perfect cuts • Cutting angle and tooth shape are adapted to the application an…

This Festool rip cutting circular saw blade for wood is especially designed for the TS55 FEBQ plunge saw and is made from high quality steel with fine grain carbide teeth. Recommended For: TS55 FEBQ Specifications • Blade Diameter: 160mm • Bore: 20mm • Teeth: 12 • Cutting Width: 1.80 mm • Standard Blade Thickness: 1.20 mm • Chip Angle: 20.00° • Relief Angle: 15.00° • Irregular Tooth Pitch: 50.93 mm • Tooth Shape: PWFeatures & Benefits• High cutting performance for rip cuts in solid wood • Saw teeth made of high-quality metal – for optimum saw progress and perfect cuts • Cutting angle and tooth shape are adapted to the application an…

Suitable for cutting aluminium and plastics, this Festool circular saw blade is especially designed for the TS55 F plunge saw and is made from high quality steel with fine grain carbide teeth. Recommended For: TSS 55 FEBQ Specifications • Blade Diameter: 160mm • Bore: 20mm • Teeth: 52 • Cutting Width: 1.80 mm • Standard Blade Thickness: 1.20 mm • Chip Angle: -5.00° • Relief Angle: 20.00° • Tooth Shape: F/FAFeatures & Benefits• Especially recommended for the TS55 FEBQ • The systematic solution for cuts in aluminium and plastic • Saw teeth made of high-quality metal – for optimum saw progress and perfect cuts • Cutting angle an…

This Festool wood cutting circular saw blade is especially designed for the TS55 F plunge saw and is made from high quality steel with fine grain carbide teeth. Recommended For: TSS 55 F Specifications • Blade Diameter: 160mm • Bore: 20mm • Teeth: 28 • Cutting Width: 1.80mm • Standard Blade Thickness: 1.20mm • Chip Angle: 15° • Relief Angle: 10° • Tooth Shape: WFeatures & Benefits• Designed and recommended for the TS 55 F plunge saw • The all-rounder for all types of wood materials • Saw teeth made of high-quality metal – for optimum saw progress and perfect cuts • Cutting angle and tooth shape are adapted to the application an…

UG-KA-KS 120 Underframe Set. Specifications • Weight: 21.00 kg • Work Height: 900.00 mmFeatures & Benefits• Convenient transport on building and installation sites • Simple folding in for transport • Simple fitting of trimming attachments thanks to integrated foldaway legs • Integrated meas. scale and adjustable stop permit exact repeat cuts • Simple folding in for transport • KA-UG-R and KA-UG-L trimming attachments included • Facilitates and support KAPEX applications • Easy transport thanks to wheels • KAPEX can be taken off underframe without tools • Extension arm for mitre cuts up to 2400 mm

UG-KAPEX KS 120 Underframe for Festool's KS 120 and KS 88 mitre saws. Keeps your saw at a comfortable working height while enabling you to transport it between locations on the wheeled base. Specifications • Work Height: 900mm • Weight: 10.10kg

Festool Universal Wood Cutting Circular Saw Blade. Various configurations available. Specifications • Diameter: 190mm • Teeth: 32 • Bore: Fastfix

Festool Universal Wood Cutting Circular Saw Blade. Various configurations available. Specifications • Diameter: 210mm • Teeth: 36 • Bore: 30mm

Festool Universal Wood Cutting Circular Saw Blade. Various configurations available. Specifications • Diameter: 225mm • Teeth: 32 • Bore: 30mm

Festool Universal Wood Cutting Circular Saw Blade. Various configurations available. Specifications • Diameter: 216mm • Teeth: 36 • Bore: 30mm

Festool Universal Wood Cutting Circular Saw Blade. Various configurations available. Specifications • Diameter: 254mm • Teeth: 40 • Bore: 30mm

VB TKS 80 Extension Table for the Festool TKS 80 EBS SawStop table saw. Extends the support area by 411mm. Specifications • Part No: 575840Features & Benefits• Extension for the TKS 80 designed for wider workpieces • For safe and precise width sawing • Extends the support area by 411 mm • Maximum cutting width with 680 mm rip cut • Adjustable dimension scale • Can be attached or detached quickly and easily