Power Tool Accessories Trend

Quick release 1/4 inch hex shank for use in quick tool change drills. Accurate self centred pilot hole drilling for hinges and lock face plates. Use on timbers and boards. High Speed Steel (HSS) drlll bit for longer life. Sprung loaded to ensure drill bit retracts safely. Easily dismantled for cleaning and drill bit replacement. Use in quick chucks and impact drivers.Specifications• Shank Diameter=1/4 inch hex• D=2.4 mm (3/32")• D=2.8 mm (7/64")• D=3.6 mm (9/64")• Screw size=No.6 (3.5 mm)• Screw size=No.8 (4.0 mm)• Screw size=No.10 (5.0 mm)Contents• 1 x Drill bit guide 3/32"• 1 x Drill bit guide 7/64"• 1 x Drill bit guide 9/64"

Trend Beech Biscuits - 1000 No 10 size 53mm X 19mm X 4mm Beech biscuits in the popular No10 size for 13 - 18mm thick stock. Compressed to 4mm thickness for consistent solid jointing once in contact with PVA adhesives. All Trend biscuits are cut with a diagonal grain pattern for maximum strength in any jointing position. Ideal for smaller joinery and furniture work, and face framing construction using 60mm wide and above components. 1000 box size for economical trade workshop use. Specifications • Type or Grade: Size 10 • Pack Qty: 1000 pack Contents: 1000 x No.10 Biscuits

Trend biscuits are made of die cut beech. Used with PVA adhesives, the moisture in the glue expands the beech biscuits to form a solid bond that locks any joint tightly for maximum strength. Made from high quality compressed beech in the popular No20 size for heavier construction applications for use on all hard and softwoods, ply, chipboard, MDF, allowing fast, strong connections. The ideal quick, easy and accurate joint connection to align worktops to achieve a perfect flush fitting joint. Specifications • Type or Grade: Size 10 • Pack Qty: 100 pack Contents: 100 x No.10 Biscuits

Carry case for the DLB digital level box. Belt loop. Contents not included.

The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high-speed steel (HSS) anvil. Use with a Hammer. The chisel can be resharpened. Ideal for use with hinge and lock jigs.PTDTRECCHISEL

Trend Trammel Set - For use with steel rules up to 50mm wide Fast, accurate easily adjustable trammel set for marking circles and arcs using a steel rule. Allows the marking to be made flat to the work for maximum control and accuracy. Perfect for fitting to a combination square for easy marking of parallel lines to an edge. Supplied with an additional interchangeable scribing blade; ideal for cutting accurate, consistent veneers for inlay work. Fits steel rules from 6in/150mm long up to 2in/50mm wide, allowing bigger arc and circles work to be achieved with longer rules. Contents: 2 x Trammel head 1 x Blade post 1 x Scribe/pivot post 1 x Hyper fine blade 1 x Pencil 1 x Hex key

Craft Pro Trend solid carbide planer blades are manufactured from high grade carbide and are supplied in pairs. Precision ground with two cutting edges and reversible for extended life. Two cutting edges and are reversible for twice the life Solid Carbide STC for longer llfe in abrasive materials Specifications • Dia Metric: 5.9 • Cut Length Metric: 80.5 • Pack Qty: One pair • Saw Plate Thick Metric: 1.2

Tungsten Carbide Tipped Circular Saw blades designed for a professional finish in plastic & alloy. For cutting alloy always use a cutting lubricant. Wear gloves and clamp material securely. Colour Code: Grey. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to be tilted back to assist fitting into the frame. Maximum door weight 50kg.PTDTREDSTAND

The Trend EASYSCRIBE is a handheld scribing tool for architrave skirting scribing doors scribing worktops setting hinge recess depth etc. Fitted with an articulated arm that allows the required offset to be set precisely from 1mm to 40mm for increased flexibility. It has a thin guide plate (0.5mm) for access into narrow gaps ensuring full versatility. The flat base ensures constant contact for a consistent scribe. Fitted with a knurled foregrip sliding steel guide plate for up to 50mm projection and a thumb wheel for fine adjustment. It marks a narrow pencil line 0.7mm wide. Use for a multitude of applications including hanging doors installing worktops plinths & skirting architraves …

Honing compound and leather strop to hone chisels and plane irons. 100 gram honing polishing compound. Used to polish sharpened cutting edges to give a highly polished, sharp cutting edge. Contents: 1 x Leather strop 1 x Compound bar

The Trend Loc Block consists of four interlocking gripping blocks that lock together to allow the workpiece to be held in place when sanding drilling and finishing. No need to use clamps. Sets up in seconds by gripping the workpiece and bench raising the workpiece from the bench to allow complete access to every edge. Size when four blocks interlocked 173mm x 173mm.PTDTRELOCBLK

Non slip mat for jig making. Self adhesive backed sheet. Size 300mm x 300mm. Can be cut to size to suit application. Can be used to refurbish pushblocks or lining the drawers of workshop tool chests etc.

Trend Non-Slip Mat - For preventing work from slipping on the bench Specially formulated PVC 1220mm X 610mm Non Slip Mat ideal for clamp free holding of workpieces on the bench. Thin, open waffle design is perfect for sanding or routing to prevent the dust building up around the work. Non-slip design grips the bench and the work for multiple uses including planing work, holding sharpening stones while you hone and many more. Large area allows the mat to be used as a general purpose cover to protect the benchtop. Easy to cut to size for use as smaller non-slip mats if required.

Trend solid carbide planer blades are manufactured from high grade carbide and are supplied in pairs. Precision ground with two cutting edges and reversible for extended life. Two cutting edges and are reversible for twice the life Solid Carbide STC for longer llfe in abrasive materials Specifications • Dia Metric: 5.5 • Cut Length Metric: 75.5 • Pack Qty: One pair • Saw Plate Thick Metric: 1.1

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood giving strong instant joints. Solid hardened bushes with a variable pitch of 29 to 63mm. Use on timber MDF plywood and blockboard. It allows a variety of joints to be created individually. Uses square drive self-tapping screws. Workpiece can be handled immediately after gluing and screwing creating time-saving benefits. No clamps required.The Trend PH/JIG Pocket Hole Jig is supplied with: 100 x Dome Head Screws 1 x Face Clamp 1 x HSS Drill Bit With Collar 1 x 75mm Square Drive Bit 1 x 150mm Square Drive Bit.PTDTREPHJIG

Trend Pocket Hole Jig Mini - Portable Pocket Hole Jig Compact design perfect for repair work in situ on furniture, cupboards, and cabinets. Supplied with twin bases for use on new work and repairs for increased diversity. Fully adjustable from 18mm to 54mm centres for twin holes or stripped down for single pockets; ideal for repairs or joints on thinner components. Comes ready to use, complete with drill, driver bit and screws. High quality all metal build quality for durability, solid performance and consistency in any project. Contents: 50 x No.7 x 30mm (1-1/4 inch) fine 1 x Long base 1 x Short base 1 x HSS drill bit with collar 1 x 150mm Square drive bit 1 x Hex key 4mm A/F 1 x Hex …

Trend planer blades - 80.5mm long for power planers 80.5mm x 5.9mm x 1.2mm designed to fit older planers including Elu, AEG and DeWalt. Double sided design for extended lifespan and high performance. High quality solid carbide blades for durability and consistent clean cutting. Perfect for use on hard and soft woods, chipboard, ply, laminates and MDF. Compatible with AEG (Atlas Copco) 450 Dewalt DW676K Elu MFF40, MFF80K, MFF80, MFF81, MFF81K power planers. Specifications • Dia Metric: 5.9 • Cut Length Metric: 80.5 • Pack Qty: One pair • Saw Plate Thick Metric: 1.2

Trend planer blades - 82mm long for power planers 82mm x 5mm x 1.2mm blades designed to fit Black and Decker models of planers Double sided design for extended lifespan and high performance. High quality solid carbide blades for durability and consistent clean cutting. Perfect for use on hard and soft woods, chipboard, ply, laminates and MDF. Compatible with Black & Decker P7102, P7103, PL805 power planers. Specifications • Dia Metric: 5 • Cut Length Metric: 82 • Pack Qty: One pair • Saw Plate Thick Metric: 1.2

Trend planer blades - 82mm long for power planers 82mm x 5.5mm x 1.1mm The most popular size on the market, fits the majority of planers including Makita, Bosch, DeWalt, Hitachi, Metabo and many more. Perfect for use on hard and soft woods, chipboard, ply, laminates and MDF. Double sided design for extended lifespan and high performance. High quality solid carbide blades for durability and consistent clean cutting. Double sided design for extended lifespan and high performance. Specifications • Dia Metric: 5.5 • Cut Length Metric: 82 • Pack Qty: One pair • Saw Plate Thick Metric: 1.1

Trend solid carbide planer blades are manufactured from high grade carbide and are supplied in pairs. They are precision ground with two cutting edges and reversible for extended life. Never use dull blades. Unplug machine when fitting blades or undertaking any maintenance. Always refer to manufacturer's instruction when making adjustments. Planer blades must be securely clamped so that they cannot work loose in service. Length: 92 mm Width: 5.5 mm Thickness: 1.2 mm Suitable for Hitachi FU30 Holz-Her 2286 Dia Metric: 5.5 Cut Length Metric: 92 Pack Qty: One pair Saw Plate Thick Metric: 1.2

Connectors for Pro storage range cart and toolboxes

Trend Snappy 4.75mm x 12.7mm TCT Counterbore - to recess screws for plugging 12/7mm diameter TCT counterbore to drill precision recess to hide screws below the surface when used with matching plug cutter. Ideal for screws up to 12 gauge Imperial sizes Used in conjunction with the Trend Snappy SNAP/PC/127T or SNAP/PC/12 Plug Cutters, fixings can be hidden with an almost invisible plug for a high quality, professional finish. 4.75mm diameter drill allows for pilot/screw clearance to prevent splitting and to ensure accurate, consistent alignment. Drill depth can be altered to suit material thickness and is easily replaceable if it becomes damaged. TCT cutting faces can be resharpened ensuring …

Trend Snappy Drill Bit Guide - for No6 Gauge Screws The perfect accessory for making centralised pilot holes when fitting countersunk hinges and other ironmongery. With its bevelled nose design, the Drill Bit Guide automatically self centres when positioned in a countersink. Eliminates any problems of off set screws, misalignment of fittings or screwheads sticking up, for professional, consistent flush fitting results every time. Makes the correct sized pilot hole for any fitting that requires No6 gauge screws. Direct fit to Trend Snappy Chucks with spring loaded drill bit for fast action in hard and softwoods. Specifications • Shank Diameter: 1/4 hex • Dia Metric: 2 • Dia …