Hammers

The Wiha FibreBuzz® Soft-Faced Hammer for the controlled positioning and joining of work pieces. The soft-faced hammer dead-blow allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. A special metal ball filling in the hammer head helps the soft-faced hammer to work completely without recoil and in a way' which is easy on the joints.Fitted with a high-quality, plastic fibreglass handle that is lightweight and an almost unbreakable. The non-slip, ergonomically shaped multi-component grip ensures a tight and secure grip that guarantees full control even when used with oily or wet hands. Integrated impact protection safeguards …

Thor 61-953W 953W White Rubber Mallet 675g 64mm Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications.  Features:  
- Thor rubber mallets are a one-piece design 
- Feature a rubber head and self locking handle 
- These semi-hard rubber mallets give a gentle but firm blow with little rebound 
- Black Head: Ideal for use under damp conditions or outdoors 
- White Head: Will not discolour or leave marks on work surfaces   Used as a general-purpose mallet in automo…

Wera soft-face hammers. Double-sided conical design for a secure, inseparable connection between the hammer handle and head. The hammer head is made out of semi-hard urethane; the handle out of high quality ash wood. Diverse applications thanks to the interchangeable soft-face hammer heads. Suitable for car body, engineering and automotive applications. Features and Benefits: • Powerful hammering with surface protection • Soft-face hammers with hammer head out of urethane; semi-hard • For hammering sharp-edged workpieces; car body, engineering and automotive applications. • Inseparable and secure connection between the hammer handle and head • High-quality ashwood handle …

The Faithfull Carver's Mallet is manufactured from close grain beech. This round head mallet is ideal for most hand carving applications. The circular cross section handle helps make the mallet comfortable to use and is permanently wedged and glued to the single piece head.Additional Information:• Type: Wood• Weight: 500g (1lb 2oz)• Size: 90mm• Colour: Brown• Handle Type: Wooden• Handle Length: 160mm

Expert Quality, polished face solid forged head from fine grain high carbon steel correctly hardened and tempered with a lacquer coating for rust protection. Natural straight grained hickory shaft sanded and lacquered. Sold Loose.

The Faithfull general purpose hammer for builder and contractor for delivering close heavy blows. Precision ground striking faces, specially hardened and heat-treated to withstand the most high impact heavy applications. Specifications Manufactured in accordance with BS876 Hardened Heat-treated: high impact finish Fitted with a selected fully seasoned hickory handle Weight 1130g (2 1/2lb) Colour: Brown #html-body [data-pb-style="60FF6AAA8262C"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: …

Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.One soft grey and one …

Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.One soft grey and one …

Forged steel head and shock-absorbing, high-strength fibreglass shaft with nylon surround. Polished and lacquered head and claw. High-grip handle is resistant to oil and chemicals. For fixing and removing nails.

Ball Pein Hammer

The name of a pro
Model Number: STHT0-54155
Colour: Grey

Ball Pein Hammer

Performance: thanks to better weight distribution of the hammer for ideal efficiency and maximum force
Safety: the epoxy connection of the head ensures optimum safety for DIY work
Ergonomics: Extended grip and bi-material handle gives the hammer a simple and intuitive grip
Stanley STHT0-54129 Riveting Hammer with Fibreglass Handle 25 mm

Better distribution of the weight of the hammer for the best effect,
Effective and robust fibreglass handle
More safety during your work with epoxy bond of head
More comfort by using a ribbed Dual-Material handle for better grip

The Simplex superplastic insert with its hardness of approx. 65 Shore D is a medium hard insert. This white plastic insert is composed of extruded and extremely homogeneous material. Compared to injection moulded plastic inserts, it is therefore considerably more wear-resistant and durable.Application Areas:- Gardening and landscaping, paving, kerbstone setting, fencing, driving steel wedges, scaffold and tent construction, sheet-metal work, prefabricated house construction, joiner´s work, carpenter´s work, assembly of sharp-edged workpieces.- This article Simplex insert Superplastic, /(Ø: 100 mm) is one variant of the article group SIMPLEX insert Superplastic.Features:- Simplex superplastic ins…

The Simplex superplastic insert with its hardness of approx. 65 Shore D is a medium hard insert. This white plastic insert is composed of extruded and extremely homogeneous material. Compared to injection moulded plastic inserts, it is therefore considerably more wear-resistant and durable.Application Areas:- Gardening and landscaping, paving, kerbstone setting, fencing, driving steel wedges, scaffold and tent construction, sheet-metal work, prefabricated house construction, joiner´s work, carpenter´s work, assembly of sharp-edged workpieces.- This article Simplex insert Superplastic,/ (Ø: 60 mm) is one variant of the article group Simplex insert Superplastic.Features:- Simplex superplastic ins…

The Sealey DP945 Slide Hammer Kit with a comfortable rubber grip handle The Sealey DP945 is a 9 Piece Slide Hammer kit featuring 2.1kg sliding weight and a comfortable rubber grip handle for added control. Features:
- Slide hammer kit with 2.1kg sliding weight
- Comfortable rubber grip handle for added control
- Supplied with various attachments to perform a range of tasks Comes With:
- Adaptor
- Taper Screw
- Screw Holder
- Self Tapping Screw
- Small & Large Flat Hooks
- Small & Large Round Hooks Specification:
- Model No: DP945
- Sliding Weight: 2.1kg(4.5lb)

Forged steel head and shock-absorbing, high-strength fibreglass shaft with nylon surround. Magnetised nail holder to ease starting of nails. High-grip handle resistant to oil and chemicals. For fixing tiles and slates.

Anti-Rebound Hammer Made Of A Single Piece Of Steel Plate With Interchangeable Rectangular Yellow Polyurethane Tips Ideal For Precision Hits On Edges And Corners. Ergonomic Rubber Grip.Features:- Anti-Rebound Hammer, Protects The Joints From Vibrations- Interchangeable Mouths- Ergonomic HandleSpecifications:- Ø (Mm): 35x45 - Width (Mm): 140 - Length (Mm): 310 - Weight (G): 1000 Applications:- Laminate And Parquet Floors,- Installation Of Doors And Windows,- Drywall,- Assembly Of Furniture,- Assemblies,- Sheet Metal Work,- Positioning And Adjustment Of Parts,- Repairs.

All-purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : White.Size : 57mm (2.1/4in).Weight : 567g (20oz).Face : 57 mm.Additional Information:• Type: Rubber• Weight: 567g (1lb 4oz)• Size: 57mm• Colour: White• Handle Type: Wooden• Handle Length: 390mm

Thor 61-952 Black Rubber Mallet (54mm) 310g The Thor 61-952 is an all purpose mallet used widely for automotive, industrial, brewery, DIY camping etc. Features:
- Self locking handle
- Wood handle
- Provides a firm blow with very little rebound #Specification:
- Striking Material: Rubber
- Round Head Diameter: 54mm 2.1/4in
- Approximate Weight: 310g
- Approximate Length: 320mm 12.3/4in

Olympia Tools Rubber Mallet has a solid rubber head with wooden shaft. For general use where marking of surfaces is not critical.The Olympia Rubber Mallet has a solid rubber head with a wooden 70mm shaft.This mallet is for general use where marking of surfaces is not critical.Solid rubber head and wooden shaft. Specifications:Size: 70mm. Weight: 907g (32 oz).Additional Information:• Type: Rubber• Weight: 907g (2lb)• Size: 70mm• Colour: Black• Handle Type: Wooden• Handle Length: 330mm

Roughneck Brick Hammer manufactured from drop forged alloy steel, hardened and tempered and with a fully polished head. The tubular steel handle has a strong head to shaft connection. The ergonomically designed grip is riveted to the handle for additional safety. Unique treble injected TPR soft grip handle for comfort during use and to reduce fatigue.Additional Information:• Type: Brick Hammer• Head Weight: 680g (24oz)• Shaft Type: Steel• Handle Type: Rubber

Roughneck Non-Marking White Rubber Mallet has a single piece rubber head with a steel and soft grip handle. For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound, ideal for use under damp conditions or outdoors. These rubber mallets will not discolour or leave marks on work surfaces. Used as a general-purpose mallet in automotive, industrial, brewery, DIY and camping, garden landscape or work site application when hard materials need to be layed like concrete slabs, patios etc.The Roughneck 680g (24oz) rubber mallet has a medium hard rubber head, soft grip handle and a strong steel shaft, that is moulded together to make a one piece tool.Additional …