Other Hand Tools

Moument Flux Brushes have wooden handles. Designed for applying flux to facilitate the process of making soldering joints, these brushes can also be used for general-purpose applications. Head Length: 10mm.Total Length: 195mm.Pack Quantity: 5.Additional Information:• Type: Cleaning Tool

The Monument 437A Adaptor connects the 430F professional soldering and brazing torch (UNEF 7/16 in) to 1in US-Style bottles e.g., propane, MAPP® and MAPPro®.Made in BritainAdditional Information:• Type: Accessories

This Monument 438D Adaptor Primus 2000 To 430F adaptor adapts the Monument 430F Professional Torch to refillable bottles e.g., Primus®2000 and Calor®340.UNEF: 7/16in.Made in Britain.Additional Information:• Type: Accessories

The Monument 4501F GRIP+ R2 3-Stepped Radiator Valve Tool fits most radiator end caps and valves. The 3-stepped tool has the following sizes 10mm & 12mm Slotted and 1/2in A/F Hex. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access.

The Monument 4507X GRIP+ R1 Radiator Thermostatic Radiator Valve Tail Fitting Tool with 16mm internal hex. Fits most radiator valves. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.Additional Information:• Type: TRV Tail Spanner

The Monument 4508A GRIP+ T7 3-Prong Gate Valve Tool is for closing and opening damaged gate valves. Use with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.Additional Information:• Type: Spanner

The Monument 4534X GRIP+ T1 is a 27x32mm double-ended nickel plated hexagonal fitting tool. Fits most radiator valves, back nut box spanners, taps, pumps and cabinets. Use with the Monument 323F Tap Back Nut Box spanner. When connected to the box spanner, the Monument 4537G GRIP+ shorty swivel handle or the Monument 345V adjustable basin wrench handle, it extends the reach for easier access. Made in Britain.Additional Information:• Type: Fitting for Box Spanner

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in body, use parallel bush series.Cutters are case hardened, feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits 1/2in and 3/4in BS5412 bevelled seats. Complete with 17, 20 mm (11/16 in, 13/16 in) Bevelled Cutters. One double bush.Additional Information:• Size: 1/2 & 3/4in• Type: Bevelled

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in the body, use the parallel brush series. Cutters are case hardened and the feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits 1/2in and 3/4in BS1010 new series and BS5412 Flat and Bevelled seats. Complete with 17, 19, 20, 25 mm (11/16in 3/4in 13/16in 1in) flat cutters and 11/16in, 13/16in (17,20mm) Bevelled Cutters. Two double bushes.

The Monument 4562P GRIP+ is a pair of stepped 8, 9 and 10mm & 11, 12 and 13mm Nickel Plated Hexagonal Fittings. They can be connected to the Monument 3240U and the 4537G GRIP+ shorty swivel handle, extending the reach of the Monument 3240U box spanners, for easier access to Monobloc tap back nuts.Additional Information:• Type: Fitting for Box Spanner

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2in and 3/4in BS1010 flat seats. Complete with 17, 19, 20 and 25mm (11/16in, 3/4in, 13/16in, 1in) flat cutters and 2 tapered cones.

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools. 1 x Monument 501X Spare Flat Tap Reseater Cutter 16mm (5/8in)

Monument Flat Tap Reseater Cutter to fit models 450, 455, 454, 458 and 460 Tap Reseating Tools. 1 x Monument 502A Spare Flat Tap Reseater Cutter 17mm (11/16in)

The Monument 170 Stiffnuts, 27 x 32mm, Kit has been especially designed for removing stiff backnuts from awkwardly placed taps, and to make tap installation a more rapid process.This tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts.Ideal for 24mm A/F, 25mm A/F, 26mm A/F and ribbed, 27mm A/F, 29mm A/F & ribbed, A/F 32mm. It comes complete with 3/8-inch cordless drill adaptor and a full user instruction manual. Specifications: Capacity: 1/2in & 3/4in.Pack Quantity: 6 Pieces.Additional Information:• Type: Box Spanner• Capacity: 1/2in …

Monument 83 tool has been designed to make the job of fitting both 15 & 22mm tank connectors easy. Traditionally the task of fitting a connector to a domestic cold water tank has been awkward and required 2 pairs of hands or very long arms. The tool engages with the dog drive of the tank connector and can then be used one handed whilst the nut of the tank connector is tightened. Size: 15 & 22mm.Additional Information:• Type: Connector• Size: 15/22mm

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. Made in Britain.The Monument Autocut Twin Pack contains the following: 1715C: Size: 15mm.1722Y: Size: 22mm Not for use on stainless steel. Spare wheel to fit is available MON269.Additional Information:• Type: Pipe Cutter• Capacity: 15mm/22mm• Copper: Y

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. Made in Britain.Monument 1712t Autocut Copper Pipe Cutter. Size: 12mm.Additional Information:• Type: Pipe Cutter• Capacity: 12mm• Copper: Y

The Monument Autocut Pipe Cutter has an aluminium body. Its compact size means that it is ideal for work in confined spaces. The cutter cuts in one direction to ensure a perfect cutting edge that helps prevent leaks and uneven joints. It will only cut the exact size of copper pipe specified. Not for use on stainless steel. Made in Britain.The Monument MON1727 1727N Autocut Pipe Cutter comes in the following:Size: 27.4mm.Additional Information:• Type: Pipe Cutter• Capacity: 27.4mm• Copper: Y

Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 735G No.3 Beechwood Lead Dresser.Face: 55 x 190mm (2 1/4 x 7/1/2 in).Additional Information:• Material: Beechwood• Type: Lead Dresser• Size (mm): 55 x 190

Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 736J No.4 Beechwood Lead Dresser.Face: 60x200mm (2 3/8 x 8 in).Additional Information:• Material: Beechwood• Type: Lead Dresser• Size (mm): 60 x 200

Monument Beechwood Lead Dresser specially designed for use on sheet lead, copper, zinc, aluminium etc. Made with sufficent lift to clear the users knuckles. Manufactured from economically priced beech timber that is ideally suited to these tools.Monument 737M No.5 Beechwood Lead Dresser.Face: 75 x 225mm (3 x 9 in).Additional Information:• Material: Beechwood• Type: Lead Dresser• Size (mm): 75 x 225

Using Monument Hand Bellows, air may be carefully pumped into the pipe. Fitted with a positive, hand operated non-return valve. Designed for use with Monument Air testing U Gauge kit.Additional Information:• Type: Hand Bellows

Monument Soldering & Brazing Pad resist temperatures up to 600°C and do not present any of the hazards associated with asbestos material. 2350 Made from woven glass fabric (professional quality).2351 Made from HDW graphite material (professional quality). Made in Britain.Monument 2351A Soldering & Brazing Pad resists temperatures up to 600º Celsius, and does not present any of the hazards associated with asbestos material. Made from HDW graphite material Size: 250mm² (10in²).Additional Information:• Material: HDW Graphite• Size (mm): 250 x 250• Size (in): 10 x 10